[Intel-gfx] [PATCH 4/9] drm/i915: refactor cursor code out of i915_display.c
Jani Nikula
jani.nikula at linux.intel.com
Thu Dec 10 16:12:46 UTC 2020
On Thu, 10 Dec 2020, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Thu, Dec 10, 2020 at 02:17:50PM +1000, Dave Airlie wrote:
>> From: Dave Airlie <airlied at redhat.com>
>>
>> This file is a monster, let's start simple, the cursor plane code
>> seems pretty standalone, and splits out easily enough.
>>
>> Signed-off-by: Dave Airlie <airlied at redhat.com>
>> ---
>> drivers/gpu/drm/i915/Makefile | 1 +
>> drivers/gpu/drm/i915/display/intel_cursor.c | 805 +++++++++++++++++++
>> drivers/gpu/drm/i915/display/intel_display.c | 796 +-----------------
>> drivers/gpu/drm/i915/display/intel_display.h | 12 +
>
> I would just add the intel_cursor.h for this. intel_display.h is an
> even bigger mess than intel_display.c, and causing no end of redundant
> rebuilds. The smaller we can make it the better IMO.
Separate header for each .c is where we've been heading since we started
refactoring the driver to multiple subdirs instead of the flat
structure, and started chopping up files as a consequence.
Also, please prefix the functions in intel_foo.[ch] with
intel_foo_. This is also where we've been heading for a while now.
BR,
Jani.
>
> Looks like a mechanical move, and seems to match my attempt at it so
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
>> 4 files changed, 824 insertions(+), 790 deletions(-)
>> create mode 100644 drivers/gpu/drm/i915/display/intel_cursor.c
>>
>> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
>> index e5574e506a5c..98a35b939052 100644
>> --- a/drivers/gpu/drm/i915/Makefile
>> +++ b/drivers/gpu/drm/i915/Makefile
>> @@ -197,6 +197,7 @@ i915-y += \
>> display/intel_combo_phy.o \
>> display/intel_connector.o \
>> display/intel_csr.o \
>> + display/intel_cursor.o \
>> display/intel_display.o \
>> display/intel_display_power.o \
>> display/intel_dpio_phy.o \
>> diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c
>> new file mode 100644
>> index 000000000000..87a7a74a25ac
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/display/intel_cursor.c
>> @@ -0,0 +1,805 @@
>> +// SPDX-License-Identifier: MIT
>> +/*
>> + * Copyright © 2020 Intel Corporation
>> + */
>> +#include <linux/kernel.h>
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_atomic_uapi.h>
>> +#include <drm/drm_damage_helper.h>
>> +#include <drm/drm_plane_helper.h>
>> +#include <drm/drm_fourcc.h>
>> +
>> +#include "intel_atomic.h"
>> +#include "intel_atomic_plane.h"
>> +#include "intel_display_types.h"
>> +#include "intel_display.h"
>> +
>> +#include "intel_frontbuffer.h"
>> +#include "intel_pm.h"
>> +#include "intel_psr.h"
>> +#include "intel_sprite.h"
>> +
>> +/* Cursor formats */
>> +static const u32 intel_cursor_formats[] = {
>> + DRM_FORMAT_ARGB8888,
>> +};
>> +
>> +static const u64 cursor_format_modifiers[] = {
>> + DRM_FORMAT_MOD_LINEAR,
>> + DRM_FORMAT_MOD_INVALID
>> +};
>> +
>> +static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
>> +{
>> + struct drm_i915_private *dev_priv =
>> + to_i915(plane_state->uapi.plane->dev);
>> + const struct drm_framebuffer *fb = plane_state->hw.fb;
>> + const struct drm_i915_gem_object *obj = intel_fb_obj(fb);
>> + u32 base;
>> +
>> + if (INTEL_INFO(dev_priv)->display.cursor_needs_physical)
>> + base = sg_dma_address(obj->mm.pages->sgl);
>> + else
>> + base = intel_plane_ggtt_offset(plane_state);
>> +
>> + return base + plane_state->color_plane[0].offset;
>> +}
>> +
>> +static u32 intel_cursor_position(const struct intel_plane_state *plane_state)
>> +{
>> + int x = plane_state->uapi.dst.x1;
>> + int y = plane_state->uapi.dst.y1;
>> + u32 pos = 0;
>> +
>> + if (x < 0) {
>> + pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
>> + x = -x;
>> + }
>> + pos |= x << CURSOR_X_SHIFT;
>> +
>> + if (y < 0) {
>> + pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
>> + y = -y;
>> + }
>> + pos |= y << CURSOR_Y_SHIFT;
>> +
>> + return pos;
>> +}
>> +
>> +static bool intel_cursor_size_ok(const struct intel_plane_state *plane_state)
>> +{
>> + const struct drm_mode_config *config =
>> + &plane_state->uapi.plane->dev->mode_config;
>> + int width = drm_rect_width(&plane_state->uapi.dst);
>> + int height = drm_rect_height(&plane_state->uapi.dst);
>> +
>> + return width > 0 && width <= config->cursor_width &&
>> + height > 0 && height <= config->cursor_height;
>> +}
>> +
>> +static int intel_cursor_check_surface(struct intel_plane_state *plane_state)
>> +{
>> + struct drm_i915_private *dev_priv =
>> + to_i915(plane_state->uapi.plane->dev);
>> + unsigned int rotation = plane_state->hw.rotation;
>> + int src_x, src_y;
>> + u32 offset;
>> + int ret;
>> +
>> + ret = intel_plane_compute_gtt(plane_state);
>> + if (ret)
>> + return ret;
>> +
>> + if (!plane_state->uapi.visible)
>> + return 0;
>> +
>> + src_x = plane_state->uapi.src.x1 >> 16;
>> + src_y = plane_state->uapi.src.y1 >> 16;
>> +
>> + intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
>> + offset = intel_plane_compute_aligned_offset(&src_x, &src_y,
>> + plane_state, 0);
>> +
>> + if (src_x != 0 || src_y != 0) {
>> + drm_dbg_kms(&dev_priv->drm,
>> + "Arbitrary cursor panning not supported\n");
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * Put the final coordinates back so that the src
>> + * coordinate checks will see the right values.
>> + */
>> + drm_rect_translate_to(&plane_state->uapi.src,
>> + src_x << 16, src_y << 16);
>> +
>> + /* ILK+ do this automagically in hardware */
>> + if (HAS_GMCH(dev_priv) && rotation & DRM_MODE_ROTATE_180) {
>> + const struct drm_framebuffer *fb = plane_state->hw.fb;
>> + int src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
>> + int src_h = drm_rect_height(&plane_state->uapi.src) >> 16;
>> +
>> + offset += (src_h * src_w - 1) * fb->format->cpp[0];
>> + }
>> +
>> + plane_state->color_plane[0].offset = offset;
>> + plane_state->color_plane[0].x = src_x;
>> + plane_state->color_plane[0].y = src_y;
>> +
>> + return 0;
>> +}
>> +
>> +static int intel_check_cursor(struct intel_crtc_state *crtc_state,
>> + struct intel_plane_state *plane_state)
>> +{
>> + const struct drm_framebuffer *fb = plane_state->hw.fb;
>> + struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
>> + const struct drm_rect src = plane_state->uapi.src;
>> + const struct drm_rect dst = plane_state->uapi.dst;
>> + int ret;
>> +
>> + if (fb && fb->modifier != DRM_FORMAT_MOD_LINEAR) {
>> + drm_dbg_kms(&i915->drm, "cursor cannot be tiled\n");
>> + return -EINVAL;
>> + }
>> +
>> + ret = intel_atomic_plane_check_clipping(plane_state, crtc_state,
>> + DRM_PLANE_HELPER_NO_SCALING,
>> + DRM_PLANE_HELPER_NO_SCALING,
>> + true);
>> + if (ret)
>> + return ret;
>> +
>> + /* Use the unclipped src/dst rectangles, which we program to hw */
>> + plane_state->uapi.src = src;
>> + plane_state->uapi.dst = dst;
>> +
>> + ret = intel_cursor_check_surface(plane_state);
>> + if (ret)
>> + return ret;
>> +
>> + if (!plane_state->uapi.visible)
>> + return 0;
>> +
>> + ret = intel_plane_check_src_coordinates(plane_state);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned int
>> +i845_cursor_max_stride(struct intel_plane *plane,
>> + u32 pixel_format, u64 modifier,
>> + unsigned int rotation)
>> +{
>> + return 2048;
>> +}
>> +
>> +static u32 i845_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
>> +{
>> + u32 cntl = 0;
>> +
>> + if (crtc_state->gamma_enable)
>> + cntl |= CURSOR_GAMMA_ENABLE;
>> +
>> + return cntl;
>> +}
>> +
>> +static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,
>> + const struct intel_plane_state *plane_state)
>> +{
>> + return CURSOR_ENABLE |
>> + CURSOR_FORMAT_ARGB |
>> + CURSOR_STRIDE(plane_state->color_plane[0].stride);
>> +}
>> +
>> +static bool i845_cursor_size_ok(const struct intel_plane_state *plane_state)
>> +{
>> + int width = drm_rect_width(&plane_state->uapi.dst);
>> +
>> + /*
>> + * 845g/865g are only limited by the width of their cursors,
>> + * the height is arbitrary up to the precision of the register.
>> + */
>> + return intel_cursor_size_ok(plane_state) && IS_ALIGNED(width, 64);
>> +}
>> +
>> +static int i845_check_cursor(struct intel_crtc_state *crtc_state,
>> + struct intel_plane_state *plane_state)
>> +{
>> + const struct drm_framebuffer *fb = plane_state->hw.fb;
>> + struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
>> + int ret;
>> +
>> + ret = intel_check_cursor(crtc_state, plane_state);
>> + if (ret)
>> + return ret;
>> +
>> + /* if we want to turn off the cursor ignore width and height */
>> + if (!fb)
>> + return 0;
>> +
>> + /* Check for which cursor types we support */
>> + if (!i845_cursor_size_ok(plane_state)) {
>> + drm_dbg_kms(&i915->drm,
>> + "Cursor dimension %dx%d not supported\n",
>> + drm_rect_width(&plane_state->uapi.dst),
>> + drm_rect_height(&plane_state->uapi.dst));
>> + return -EINVAL;
>> + }
>> +
>> + drm_WARN_ON(&i915->drm, plane_state->uapi.visible &&
>> + plane_state->color_plane[0].stride != fb->pitches[0]);
>> +
>> + switch (fb->pitches[0]) {
>> + case 256:
>> + case 512:
>> + case 1024:
>> + case 2048:
>> + break;
>> + default:
>> + drm_dbg_kms(&i915->drm, "Invalid cursor stride (%u)\n",
>> + fb->pitches[0]);
>> + return -EINVAL;
>> + }
>> +
>> + plane_state->ctl = i845_cursor_ctl(crtc_state, plane_state);
>> +
>> + return 0;
>> +}
>> +
>> +static void i845_update_cursor(struct intel_plane *plane,
>> + const struct intel_crtc_state *crtc_state,
>> + const struct intel_plane_state *plane_state)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> + u32 cntl = 0, base = 0, pos = 0, size = 0;
>> + unsigned long irqflags;
>> +
>> + if (plane_state && plane_state->uapi.visible) {
>> + unsigned int width = drm_rect_width(&plane_state->uapi.dst);
>> + unsigned int height = drm_rect_height(&plane_state->uapi.dst);
>> +
>> + cntl = plane_state->ctl |
>> + i845_cursor_ctl_crtc(crtc_state);
>> +
>> + size = (height << 12) | width;
>> +
>> + base = intel_cursor_base(plane_state);
>> + pos = intel_cursor_position(plane_state);
>> + }
>> +
>> + spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>> +
>> + /* On these chipsets we can only modify the base/size/stride
>> + * whilst the cursor is disabled.
>> + */
>> + if (plane->cursor.base != base ||
>> + plane->cursor.size != size ||
>> + plane->cursor.cntl != cntl) {
>> + intel_de_write_fw(dev_priv, CURCNTR(PIPE_A), 0);
>> + intel_de_write_fw(dev_priv, CURBASE(PIPE_A), base);
>> + intel_de_write_fw(dev_priv, CURSIZE, size);
>> + intel_de_write_fw(dev_priv, CURPOS(PIPE_A), pos);
>> + intel_de_write_fw(dev_priv, CURCNTR(PIPE_A), cntl);
>> +
>> + plane->cursor.base = base;
>> + plane->cursor.size = size;
>> + plane->cursor.cntl = cntl;
>> + } else {
>> + intel_de_write_fw(dev_priv, CURPOS(PIPE_A), pos);
>> + }
>> +
>> + spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
>> +}
>> +
>> +static void i845_disable_cursor(struct intel_plane *plane,
>> + const struct intel_crtc_state *crtc_state)
>> +{
>> + i845_update_cursor(plane, crtc_state, NULL);
>> +}
>> +
>> +static bool i845_cursor_get_hw_state(struct intel_plane *plane,
>> + enum pipe *pipe)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> + enum intel_display_power_domain power_domain;
>> + intel_wakeref_t wakeref;
>> + bool ret;
>> +
>> + power_domain = POWER_DOMAIN_PIPE(PIPE_A);
>> + wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
>> + if (!wakeref)
>> + return false;
>> +
>> + ret = intel_de_read(dev_priv, CURCNTR(PIPE_A)) & CURSOR_ENABLE;
>> +
>> + *pipe = PIPE_A;
>> +
>> + intel_display_power_put(dev_priv, power_domain, wakeref);
>> +
>> + return ret;
>> +}
>> +
>> +static unsigned int
>> +i9xx_cursor_max_stride(struct intel_plane *plane,
>> + u32 pixel_format, u64 modifier,
>> + unsigned int rotation)
>> +{
>> + return plane->base.dev->mode_config.cursor_width * 4;
>> +}
>> +
>> +static u32 i9xx_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
>> +{
>> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
>> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>> + u32 cntl = 0;
>> +
>> + if (INTEL_GEN(dev_priv) >= 11)
>> + return cntl;
>> +
>> + if (crtc_state->gamma_enable)
>> + cntl = MCURSOR_GAMMA_ENABLE;
>> +
>> + if (crtc_state->csc_enable)
>> + cntl |= MCURSOR_PIPE_CSC_ENABLE;
>> +
>> + if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
>> + cntl |= MCURSOR_PIPE_SELECT(crtc->pipe);
>> +
>> + return cntl;
>> +}
>> +
>> +static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,
>> + const struct intel_plane_state *plane_state)
>> +{
>> + struct drm_i915_private *dev_priv =
>> + to_i915(plane_state->uapi.plane->dev);
>> + u32 cntl = 0;
>> +
>> + if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
>> + cntl |= MCURSOR_TRICKLE_FEED_DISABLE;
>> +
>> + switch (drm_rect_width(&plane_state->uapi.dst)) {
>> + case 64:
>> + cntl |= MCURSOR_MODE_64_ARGB_AX;
>> + break;
>> + case 128:
>> + cntl |= MCURSOR_MODE_128_ARGB_AX;
>> + break;
>> + case 256:
>> + cntl |= MCURSOR_MODE_256_ARGB_AX;
>> + break;
>> + default:
>> + MISSING_CASE(drm_rect_width(&plane_state->uapi.dst));
>> + return 0;
>> + }
>> +
>> + if (plane_state->hw.rotation & DRM_MODE_ROTATE_180)
>> + cntl |= MCURSOR_ROTATE_180;
>> +
>> + return cntl;
>> +}
>> +
>> +static bool i9xx_cursor_size_ok(const struct intel_plane_state *plane_state)
>> +{
>> + struct drm_i915_private *dev_priv =
>> + to_i915(plane_state->uapi.plane->dev);
>> + int width = drm_rect_width(&plane_state->uapi.dst);
>> + int height = drm_rect_height(&plane_state->uapi.dst);
>> +
>> + if (!intel_cursor_size_ok(plane_state))
>> + return false;
>> +
>> + /* Cursor width is limited to a few power-of-two sizes */
>> + switch (width) {
>> + case 256:
>> + case 128:
>> + case 64:
>> + break;
>> + default:
>> + return false;
>> + }
>> +
>> + /*
>> + * IVB+ have CUR_FBC_CTL which allows an arbitrary cursor
>> + * height from 8 lines up to the cursor width, when the
>> + * cursor is not rotated. Everything else requires square
>> + * cursors.
>> + */
>> + if (HAS_CUR_FBC(dev_priv) &&
>> + plane_state->hw.rotation & DRM_MODE_ROTATE_0) {
>> + if (height < 8 || height > width)
>> + return false;
>> + } else {
>> + if (height != width)
>> + return false;
>> + }
>> +
>> + return true;
>> +}
>> +
>> +static int i9xx_check_cursor(struct intel_crtc_state *crtc_state,
>> + struct intel_plane_state *plane_state)
>> +{
>> + struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
>> + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> + const struct drm_framebuffer *fb = plane_state->hw.fb;
>> + enum pipe pipe = plane->pipe;
>> + int ret;
>> +
>> + ret = intel_check_cursor(crtc_state, plane_state);
>> + if (ret)
>> + return ret;
>> +
>> + /* if we want to turn off the cursor ignore width and height */
>> + if (!fb)
>> + return 0;
>> +
>> + /* Check for which cursor types we support */
>> + if (!i9xx_cursor_size_ok(plane_state)) {
>> + drm_dbg(&dev_priv->drm,
>> + "Cursor dimension %dx%d not supported\n",
>> + drm_rect_width(&plane_state->uapi.dst),
>> + drm_rect_height(&plane_state->uapi.dst));
>> + return -EINVAL;
>> + }
>> +
>> + drm_WARN_ON(&dev_priv->drm, plane_state->uapi.visible &&
>> + plane_state->color_plane[0].stride != fb->pitches[0]);
>> +
>> + if (fb->pitches[0] !=
>> + drm_rect_width(&plane_state->uapi.dst) * fb->format->cpp[0]) {
>> + drm_dbg_kms(&dev_priv->drm,
>> + "Invalid cursor stride (%u) (cursor width %d)\n",
>> + fb->pitches[0],
>> + drm_rect_width(&plane_state->uapi.dst));
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * There's something wrong with the cursor on CHV pipe C.
>> + * If it straddles the left edge of the screen then
>> + * moving it away from the edge or disabling it often
>> + * results in a pipe underrun, and often that can lead to
>> + * dead pipe (constant underrun reported, and it scans
>> + * out just a solid color). To recover from that, the
>> + * display power well must be turned off and on again.
>> + * Refuse the put the cursor into that compromised position.
>> + */
>> + if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_C &&
>> + plane_state->uapi.visible && plane_state->uapi.dst.x1 < 0) {
>> + drm_dbg_kms(&dev_priv->drm,
>> + "CHV cursor C not allowed to straddle the left screen edge\n");
>> + return -EINVAL;
>> + }
>> +
>> + plane_state->ctl = i9xx_cursor_ctl(crtc_state, plane_state);
>> +
>> + return 0;
>> +}
>> +
>> +static void i9xx_update_cursor(struct intel_plane *plane,
>> + const struct intel_crtc_state *crtc_state,
>> + const struct intel_plane_state *plane_state)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> + enum pipe pipe = plane->pipe;
>> + u32 cntl = 0, base = 0, pos = 0, fbc_ctl = 0;
>> + unsigned long irqflags;
>> +
>> + if (plane_state && plane_state->uapi.visible) {
>> + unsigned width = drm_rect_width(&plane_state->uapi.dst);
>> + unsigned height = drm_rect_height(&plane_state->uapi.dst);
>> +
>> + cntl = plane_state->ctl |
>> + i9xx_cursor_ctl_crtc(crtc_state);
>> +
>> + if (width != height)
>> + fbc_ctl = CUR_FBC_CTL_EN | (height - 1);
>> +
>> + base = intel_cursor_base(plane_state);
>> + pos = intel_cursor_position(plane_state);
>> + }
>> +
>> + spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>> +
>> + /*
>> + * On some platforms writing CURCNTR first will also
>> + * cause CURPOS to be armed by the CURBASE write.
>> + * Without the CURCNTR write the CURPOS write would
>> + * arm itself. Thus we always update CURCNTR before
>> + * CURPOS.
>> + *
>> + * On other platforms CURPOS always requires the
>> + * CURBASE write to arm the update. Additonally
>> + * a write to any of the cursor register will cancel
>> + * an already armed cursor update. Thus leaving out
>> + * the CURBASE write after CURPOS could lead to a
>> + * cursor that doesn't appear to move, or even change
>> + * shape. Thus we always write CURBASE.
>> + *
>> + * The other registers are armed by by the CURBASE write
>> + * except when the plane is getting enabled at which time
>> + * the CURCNTR write arms the update.
>> + */
>> +
>> + if (INTEL_GEN(dev_priv) >= 9)
>> + skl_write_cursor_wm(plane, crtc_state);
>> +
>> + if (!intel_crtc_needs_modeset(crtc_state))
>> + intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, 0);
>> +
>> + if (plane->cursor.base != base ||
>> + plane->cursor.size != fbc_ctl ||
>> + plane->cursor.cntl != cntl) {
>> + if (HAS_CUR_FBC(dev_priv))
>> + intel_de_write_fw(dev_priv, CUR_FBC_CTL(pipe),
>> + fbc_ctl);
>> + intel_de_write_fw(dev_priv, CURCNTR(pipe), cntl);
>> + intel_de_write_fw(dev_priv, CURPOS(pipe), pos);
>> + intel_de_write_fw(dev_priv, CURBASE(pipe), base);
>> +
>> + plane->cursor.base = base;
>> + plane->cursor.size = fbc_ctl;
>> + plane->cursor.cntl = cntl;
>> + } else {
>> + intel_de_write_fw(dev_priv, CURPOS(pipe), pos);
>> + intel_de_write_fw(dev_priv, CURBASE(pipe), base);
>> + }
>> +
>> + spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
>> +}
>> +
>> +static void i9xx_disable_cursor(struct intel_plane *plane,
>> + const struct intel_crtc_state *crtc_state)
>> +{
>> + i9xx_update_cursor(plane, crtc_state, NULL);
>> +}
>> +
>> +static bool i9xx_cursor_get_hw_state(struct intel_plane *plane,
>> + enum pipe *pipe)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> + enum intel_display_power_domain power_domain;
>> + intel_wakeref_t wakeref;
>> + bool ret;
>> + u32 val;
>> +
>> + /*
>> + * Not 100% correct for planes that can move between pipes,
>> + * but that's only the case for gen2-3 which don't have any
>> + * display power wells.
>> + */
>> + power_domain = POWER_DOMAIN_PIPE(plane->pipe);
>> + wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
>> + if (!wakeref)
>> + return false;
>> +
>> + val = intel_de_read(dev_priv, CURCNTR(plane->pipe));
>> +
>> + ret = val & MCURSOR_MODE;
>> +
>> + if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
>> + *pipe = plane->pipe;
>> + else
>> + *pipe = (val & MCURSOR_PIPE_SELECT_MASK) >>
>> + MCURSOR_PIPE_SELECT_SHIFT;
>> +
>> + intel_display_power_put(dev_priv, power_domain, wakeref);
>> +
>> + return ret;
>> +}
>> +
>> +static bool intel_cursor_format_mod_supported(struct drm_plane *_plane,
>> + u32 format, u64 modifier)
>> +{
>> + return modifier == DRM_FORMAT_MOD_LINEAR &&
>> + format == DRM_FORMAT_ARGB8888;
>> +}
>> +
>> +static int
>> +intel_legacy_cursor_update(struct drm_plane *_plane,
>> + struct drm_crtc *_crtc,
>> + struct drm_framebuffer *fb,
>> + int crtc_x, int crtc_y,
>> + unsigned int crtc_w, unsigned int crtc_h,
>> + u32 src_x, u32 src_y,
>> + u32 src_w, u32 src_h,
>> + struct drm_modeset_acquire_ctx *ctx)
>> +{
>> + struct intel_plane *plane = to_intel_plane(_plane);
>> + struct intel_crtc *crtc = to_intel_crtc(_crtc);
>> + struct intel_plane_state *old_plane_state =
>> + to_intel_plane_state(plane->base.state);
>> + struct intel_plane_state *new_plane_state;
>> + struct intel_crtc_state *crtc_state =
>> + to_intel_crtc_state(crtc->base.state);
>> + struct intel_crtc_state *new_crtc_state;
>> + int ret;
>> +
>> + /*
>> + * When crtc is inactive or there is a modeset pending,
>> + * wait for it to complete in the slowpath
>> + *
>> + * FIXME bigjoiner fastpath would be good
>> + */
>> + if (!crtc_state->hw.active || intel_crtc_needs_modeset(crtc_state) ||
>> + crtc_state->update_pipe || crtc_state->bigjoiner)
>> + goto slow;
>> +
>> + /*
>> + * Don't do an async update if there is an outstanding commit modifying
>> + * the plane. This prevents our async update's changes from getting
>> + * overridden by a previous synchronous update's state.
>> + */
>> + if (old_plane_state->uapi.commit &&
>> + !try_wait_for_completion(&old_plane_state->uapi.commit->hw_done))
>> + goto slow;
>> +
>> + /*
>> + * If any parameters change that may affect watermarks,
>> + * take the slowpath. Only changing fb or position should be
>> + * in the fastpath.
>> + */
>> + if (old_plane_state->uapi.crtc != &crtc->base ||
>> + old_plane_state->uapi.src_w != src_w ||
>> + old_plane_state->uapi.src_h != src_h ||
>> + old_plane_state->uapi.crtc_w != crtc_w ||
>> + old_plane_state->uapi.crtc_h != crtc_h ||
>> + !old_plane_state->uapi.fb != !fb)
>> + goto slow;
>> +
>> + new_plane_state = to_intel_plane_state(intel_plane_duplicate_state(&plane->base));
>> + if (!new_plane_state)
>> + return -ENOMEM;
>> +
>> + new_crtc_state = to_intel_crtc_state(intel_crtc_duplicate_state(&crtc->base));
>> + if (!new_crtc_state) {
>> + ret = -ENOMEM;
>> + goto out_free;
>> + }
>> +
>> + drm_atomic_set_fb_for_plane(&new_plane_state->uapi, fb);
>> +
>> + new_plane_state->uapi.src_x = src_x;
>> + new_plane_state->uapi.src_y = src_y;
>> + new_plane_state->uapi.src_w = src_w;
>> + new_plane_state->uapi.src_h = src_h;
>> + new_plane_state->uapi.crtc_x = crtc_x;
>> + new_plane_state->uapi.crtc_y = crtc_y;
>> + new_plane_state->uapi.crtc_w = crtc_w;
>> + new_plane_state->uapi.crtc_h = crtc_h;
>> +
>> + intel_plane_copy_uapi_to_hw_state(new_plane_state, new_plane_state, crtc);
>> +
>> + ret = intel_plane_atomic_check_with_state(crtc_state, new_crtc_state,
>> + old_plane_state, new_plane_state);
>> + if (ret)
>> + goto out_free;
>> +
>> + ret = intel_plane_pin_fb(new_plane_state);
>> + if (ret)
>> + goto out_free;
>> +
>> + intel_frontbuffer_flush(to_intel_frontbuffer(new_plane_state->hw.fb),
>> + ORIGIN_FLIP);
>> + intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->hw.fb),
>> + to_intel_frontbuffer(new_plane_state->hw.fb),
>> + plane->frontbuffer_bit);
>> +
>> + /* Swap plane state */
>> + plane->base.state = &new_plane_state->uapi;
>> +
>> + /*
>> + * We cannot swap crtc_state as it may be in use by an atomic commit or
>> + * page flip that's running simultaneously. If we swap crtc_state and
>> + * destroy the old state, we will cause a use-after-free there.
>> + *
>> + * Only update active_planes, which is needed for our internal
>> + * bookkeeping. Either value will do the right thing when updating
>> + * planes atomically. If the cursor was part of the atomic update then
>> + * we would have taken the slowpath.
>> + */
>> + crtc_state->active_planes = new_crtc_state->active_planes;
>> +
>> + if (new_plane_state->uapi.visible)
>> + intel_update_plane(plane, crtc_state, new_plane_state);
>> + else
>> + intel_disable_plane(plane, crtc_state);
>> +
>> + intel_plane_unpin_fb(old_plane_state);
>> +
>> +out_free:
>> + if (new_crtc_state)
>> + intel_crtc_destroy_state(&crtc->base, &new_crtc_state->uapi);
>> + if (ret)
>> + intel_plane_destroy_state(&plane->base, &new_plane_state->uapi);
>> + else
>> + intel_plane_destroy_state(&plane->base, &old_plane_state->uapi);
>> + return ret;
>> +
>> +slow:
>> + return drm_atomic_helper_update_plane(&plane->base, &crtc->base, fb,
>> + crtc_x, crtc_y, crtc_w, crtc_h,
>> + src_x, src_y, src_w, src_h, ctx);
>> +}
>> +
>> +static const struct drm_plane_funcs intel_cursor_plane_funcs = {
>> + .update_plane = intel_legacy_cursor_update,
>> + .disable_plane = drm_atomic_helper_disable_plane,
>> + .destroy = intel_plane_destroy,
>> + .atomic_duplicate_state = intel_plane_duplicate_state,
>> + .atomic_destroy_state = intel_plane_destroy_state,
>> + .format_mod_supported = intel_cursor_format_mod_supported,
>> +};
>> +
>> +struct intel_plane *
>> +intel_cursor_plane_create(struct drm_i915_private *dev_priv,
>> + enum pipe pipe)
>> +{
>> + struct intel_plane *cursor;
>> + int ret, zpos;
>> +
>> + cursor = intel_plane_alloc();
>> + if (IS_ERR(cursor))
>> + return cursor;
>> +
>> + cursor->pipe = pipe;
>> + cursor->i9xx_plane = (enum i9xx_plane_id) pipe;
>> + cursor->id = PLANE_CURSOR;
>> + cursor->frontbuffer_bit = INTEL_FRONTBUFFER(pipe, cursor->id);
>> +
>> + if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) {
>> + cursor->max_stride = i845_cursor_max_stride;
>> + cursor->update_plane = i845_update_cursor;
>> + cursor->disable_plane = i845_disable_cursor;
>> + cursor->get_hw_state = i845_cursor_get_hw_state;
>> + cursor->check_plane = i845_check_cursor;
>> + } else {
>> + cursor->max_stride = i9xx_cursor_max_stride;
>> + cursor->update_plane = i9xx_update_cursor;
>> + cursor->disable_plane = i9xx_disable_cursor;
>> + cursor->get_hw_state = i9xx_cursor_get_hw_state;
>> + cursor->check_plane = i9xx_check_cursor;
>> + }
>> +
>> + cursor->cursor.base = ~0;
>> + cursor->cursor.cntl = ~0;
>> +
>> + if (IS_I845G(dev_priv) || IS_I865G(dev_priv) || HAS_CUR_FBC(dev_priv))
>> + cursor->cursor.size = ~0;
>> +
>> + ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base,
>> + 0, &intel_cursor_plane_funcs,
>> + intel_cursor_formats,
>> + ARRAY_SIZE(intel_cursor_formats),
>> + cursor_format_modifiers,
>> + DRM_PLANE_TYPE_CURSOR,
>> + "cursor %c", pipe_name(pipe));
>> + if (ret)
>> + goto fail;
>> +
>> + if (INTEL_GEN(dev_priv) >= 4)
>> + drm_plane_create_rotation_property(&cursor->base,
>> + DRM_MODE_ROTATE_0,
>> + DRM_MODE_ROTATE_0 |
>> + DRM_MODE_ROTATE_180);
>> +
>> + zpos = RUNTIME_INFO(dev_priv)->num_sprites[pipe] + 1;
>> + drm_plane_create_zpos_immutable_property(&cursor->base, zpos);
>> +
>> + if (INTEL_GEN(dev_priv) >= 12)
>> + drm_plane_enable_fb_damage_clips(&cursor->base);
>> +
>> + drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
>> +
>> + return cursor;
>> +
>> +fail:
>> + intel_plane_free(cursor);
>> +
>> + return ERR_PTR(ret);
>> +}
>> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
>> index 79d7479beed2..722a1cf61941 100644
>> --- a/drivers/gpu/drm/i915/display/intel_display.c
>> +++ b/drivers/gpu/drm/i915/display/intel_display.c
>> @@ -137,16 +137,6 @@ static const u64 i9xx_format_modifiers[] = {
>> DRM_FORMAT_MOD_INVALID
>> };
>>
>> -/* Cursor formats */
>> -static const u32 intel_cursor_formats[] = {
>> - DRM_FORMAT_ARGB8888,
>> -};
>> -
>> -static const u64 cursor_format_modifiers[] = {
>> - DRM_FORMAT_MOD_LINEAR,
>> - DRM_FORMAT_MOD_INVALID
>> -};
>> -
>> static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
>> struct intel_crtc_state *pipe_config);
>> static void ilk_pch_clock_get(struct intel_crtc *crtc,
>> @@ -2528,9 +2518,9 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,
>> return offset_aligned;
>> }
>>
>> -static u32 intel_plane_compute_aligned_offset(int *x, int *y,
>> - const struct intel_plane_state *state,
>> - int color_plane)
>> +u32 intel_plane_compute_aligned_offset(int *x, int *y,
>> + const struct intel_plane_state *state,
>> + int color_plane)
>> {
>> struct intel_plane *intel_plane = to_intel_plane(state->uapi.plane);
>> struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
>> @@ -3267,7 +3257,7 @@ intel_plane_remap_gtt(struct intel_plane_state *plane_state)
>> }
>> }
>>
>> -static int
>> +int
>> intel_plane_compute_gtt(struct intel_plane_state *plane_state)
>> {
>> const struct intel_framebuffer *fb =
>> @@ -11536,569 +11526,6 @@ static bool intel_crtc_get_pipe_config(struct intel_crtc_state *crtc_state)
>> return true;
>> }
>>
>> -static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
>> -{
>> - struct drm_i915_private *dev_priv =
>> - to_i915(plane_state->uapi.plane->dev);
>> - const struct drm_framebuffer *fb = plane_state->hw.fb;
>> - const struct drm_i915_gem_object *obj = intel_fb_obj(fb);
>> - u32 base;
>> -
>> - if (INTEL_INFO(dev_priv)->display.cursor_needs_physical)
>> - base = sg_dma_address(obj->mm.pages->sgl);
>> - else
>> - base = intel_plane_ggtt_offset(plane_state);
>> -
>> - return base + plane_state->color_plane[0].offset;
>> -}
>> -
>> -static u32 intel_cursor_position(const struct intel_plane_state *plane_state)
>> -{
>> - int x = plane_state->uapi.dst.x1;
>> - int y = plane_state->uapi.dst.y1;
>> - u32 pos = 0;
>> -
>> - if (x < 0) {
>> - pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
>> - x = -x;
>> - }
>> - pos |= x << CURSOR_X_SHIFT;
>> -
>> - if (y < 0) {
>> - pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
>> - y = -y;
>> - }
>> - pos |= y << CURSOR_Y_SHIFT;
>> -
>> - return pos;
>> -}
>> -
>> -static bool intel_cursor_size_ok(const struct intel_plane_state *plane_state)
>> -{
>> - const struct drm_mode_config *config =
>> - &plane_state->uapi.plane->dev->mode_config;
>> - int width = drm_rect_width(&plane_state->uapi.dst);
>> - int height = drm_rect_height(&plane_state->uapi.dst);
>> -
>> - return width > 0 && width <= config->cursor_width &&
>> - height > 0 && height <= config->cursor_height;
>> -}
>> -
>> -static int intel_cursor_check_surface(struct intel_plane_state *plane_state)
>> -{
>> - struct drm_i915_private *dev_priv =
>> - to_i915(plane_state->uapi.plane->dev);
>> - unsigned int rotation = plane_state->hw.rotation;
>> - int src_x, src_y;
>> - u32 offset;
>> - int ret;
>> -
>> - ret = intel_plane_compute_gtt(plane_state);
>> - if (ret)
>> - return ret;
>> -
>> - if (!plane_state->uapi.visible)
>> - return 0;
>> -
>> - src_x = plane_state->uapi.src.x1 >> 16;
>> - src_y = plane_state->uapi.src.y1 >> 16;
>> -
>> - intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
>> - offset = intel_plane_compute_aligned_offset(&src_x, &src_y,
>> - plane_state, 0);
>> -
>> - if (src_x != 0 || src_y != 0) {
>> - drm_dbg_kms(&dev_priv->drm,
>> - "Arbitrary cursor panning not supported\n");
>> - return -EINVAL;
>> - }
>> -
>> - /*
>> - * Put the final coordinates back so that the src
>> - * coordinate checks will see the right values.
>> - */
>> - drm_rect_translate_to(&plane_state->uapi.src,
>> - src_x << 16, src_y << 16);
>> -
>> - /* ILK+ do this automagically in hardware */
>> - if (HAS_GMCH(dev_priv) && rotation & DRM_MODE_ROTATE_180) {
>> - const struct drm_framebuffer *fb = plane_state->hw.fb;
>> - int src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
>> - int src_h = drm_rect_height(&plane_state->uapi.src) >> 16;
>> -
>> - offset += (src_h * src_w - 1) * fb->format->cpp[0];
>> - }
>> -
>> - plane_state->color_plane[0].offset = offset;
>> - plane_state->color_plane[0].x = src_x;
>> - plane_state->color_plane[0].y = src_y;
>> -
>> - return 0;
>> -}
>> -
>> -static int intel_check_cursor(struct intel_crtc_state *crtc_state,
>> - struct intel_plane_state *plane_state)
>> -{
>> - const struct drm_framebuffer *fb = plane_state->hw.fb;
>> - struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
>> - const struct drm_rect src = plane_state->uapi.src;
>> - const struct drm_rect dst = plane_state->uapi.dst;
>> - int ret;
>> -
>> - if (fb && fb->modifier != DRM_FORMAT_MOD_LINEAR) {
>> - drm_dbg_kms(&i915->drm, "cursor cannot be tiled\n");
>> - return -EINVAL;
>> - }
>> -
>> - ret = intel_atomic_plane_check_clipping(plane_state, crtc_state,
>> - DRM_PLANE_HELPER_NO_SCALING,
>> - DRM_PLANE_HELPER_NO_SCALING,
>> - true);
>> - if (ret)
>> - return ret;
>> -
>> - /* Use the unclipped src/dst rectangles, which we program to hw */
>> - plane_state->uapi.src = src;
>> - plane_state->uapi.dst = dst;
>> -
>> - ret = intel_cursor_check_surface(plane_state);
>> - if (ret)
>> - return ret;
>> -
>> - if (!plane_state->uapi.visible)
>> - return 0;
>> -
>> - ret = intel_plane_check_src_coordinates(plane_state);
>> - if (ret)
>> - return ret;
>> -
>> - return 0;
>> -}
>> -
>> -static unsigned int
>> -i845_cursor_max_stride(struct intel_plane *plane,
>> - u32 pixel_format, u64 modifier,
>> - unsigned int rotation)
>> -{
>> - return 2048;
>> -}
>> -
>> -static u32 i845_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
>> -{
>> - u32 cntl = 0;
>> -
>> - if (crtc_state->gamma_enable)
>> - cntl |= CURSOR_GAMMA_ENABLE;
>> -
>> - return cntl;
>> -}
>> -
>> -static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,
>> - const struct intel_plane_state *plane_state)
>> -{
>> - return CURSOR_ENABLE |
>> - CURSOR_FORMAT_ARGB |
>> - CURSOR_STRIDE(plane_state->color_plane[0].stride);
>> -}
>> -
>> -static bool i845_cursor_size_ok(const struct intel_plane_state *plane_state)
>> -{
>> - int width = drm_rect_width(&plane_state->uapi.dst);
>> -
>> - /*
>> - * 845g/865g are only limited by the width of their cursors,
>> - * the height is arbitrary up to the precision of the register.
>> - */
>> - return intel_cursor_size_ok(plane_state) && IS_ALIGNED(width, 64);
>> -}
>> -
>> -static int i845_check_cursor(struct intel_crtc_state *crtc_state,
>> - struct intel_plane_state *plane_state)
>> -{
>> - const struct drm_framebuffer *fb = plane_state->hw.fb;
>> - struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
>> - int ret;
>> -
>> - ret = intel_check_cursor(crtc_state, plane_state);
>> - if (ret)
>> - return ret;
>> -
>> - /* if we want to turn off the cursor ignore width and height */
>> - if (!fb)
>> - return 0;
>> -
>> - /* Check for which cursor types we support */
>> - if (!i845_cursor_size_ok(plane_state)) {
>> - drm_dbg_kms(&i915->drm,
>> - "Cursor dimension %dx%d not supported\n",
>> - drm_rect_width(&plane_state->uapi.dst),
>> - drm_rect_height(&plane_state->uapi.dst));
>> - return -EINVAL;
>> - }
>> -
>> - drm_WARN_ON(&i915->drm, plane_state->uapi.visible &&
>> - plane_state->color_plane[0].stride != fb->pitches[0]);
>> -
>> - switch (fb->pitches[0]) {
>> - case 256:
>> - case 512:
>> - case 1024:
>> - case 2048:
>> - break;
>> - default:
>> - drm_dbg_kms(&i915->drm, "Invalid cursor stride (%u)\n",
>> - fb->pitches[0]);
>> - return -EINVAL;
>> - }
>> -
>> - plane_state->ctl = i845_cursor_ctl(crtc_state, plane_state);
>> -
>> - return 0;
>> -}
>> -
>> -static void i845_update_cursor(struct intel_plane *plane,
>> - const struct intel_crtc_state *crtc_state,
>> - const struct intel_plane_state *plane_state)
>> -{
>> - struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> - u32 cntl = 0, base = 0, pos = 0, size = 0;
>> - unsigned long irqflags;
>> -
>> - if (plane_state && plane_state->uapi.visible) {
>> - unsigned int width = drm_rect_width(&plane_state->uapi.dst);
>> - unsigned int height = drm_rect_height(&plane_state->uapi.dst);
>> -
>> - cntl = plane_state->ctl |
>> - i845_cursor_ctl_crtc(crtc_state);
>> -
>> - size = (height << 12) | width;
>> -
>> - base = intel_cursor_base(plane_state);
>> - pos = intel_cursor_position(plane_state);
>> - }
>> -
>> - spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>> -
>> - /* On these chipsets we can only modify the base/size/stride
>> - * whilst the cursor is disabled.
>> - */
>> - if (plane->cursor.base != base ||
>> - plane->cursor.size != size ||
>> - plane->cursor.cntl != cntl) {
>> - intel_de_write_fw(dev_priv, CURCNTR(PIPE_A), 0);
>> - intel_de_write_fw(dev_priv, CURBASE(PIPE_A), base);
>> - intel_de_write_fw(dev_priv, CURSIZE, size);
>> - intel_de_write_fw(dev_priv, CURPOS(PIPE_A), pos);
>> - intel_de_write_fw(dev_priv, CURCNTR(PIPE_A), cntl);
>> -
>> - plane->cursor.base = base;
>> - plane->cursor.size = size;
>> - plane->cursor.cntl = cntl;
>> - } else {
>> - intel_de_write_fw(dev_priv, CURPOS(PIPE_A), pos);
>> - }
>> -
>> - spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
>> -}
>> -
>> -static void i845_disable_cursor(struct intel_plane *plane,
>> - const struct intel_crtc_state *crtc_state)
>> -{
>> - i845_update_cursor(plane, crtc_state, NULL);
>> -}
>> -
>> -static bool i845_cursor_get_hw_state(struct intel_plane *plane,
>> - enum pipe *pipe)
>> -{
>> - struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> - enum intel_display_power_domain power_domain;
>> - intel_wakeref_t wakeref;
>> - bool ret;
>> -
>> - power_domain = POWER_DOMAIN_PIPE(PIPE_A);
>> - wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
>> - if (!wakeref)
>> - return false;
>> -
>> - ret = intel_de_read(dev_priv, CURCNTR(PIPE_A)) & CURSOR_ENABLE;
>> -
>> - *pipe = PIPE_A;
>> -
>> - intel_display_power_put(dev_priv, power_domain, wakeref);
>> -
>> - return ret;
>> -}
>> -
>> -static unsigned int
>> -i9xx_cursor_max_stride(struct intel_plane *plane,
>> - u32 pixel_format, u64 modifier,
>> - unsigned int rotation)
>> -{
>> - return plane->base.dev->mode_config.cursor_width * 4;
>> -}
>> -
>> -static u32 i9xx_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
>> -{
>> - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
>> - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>> - u32 cntl = 0;
>> -
>> - if (INTEL_GEN(dev_priv) >= 11)
>> - return cntl;
>> -
>> - if (crtc_state->gamma_enable)
>> - cntl = MCURSOR_GAMMA_ENABLE;
>> -
>> - if (crtc_state->csc_enable)
>> - cntl |= MCURSOR_PIPE_CSC_ENABLE;
>> -
>> - if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
>> - cntl |= MCURSOR_PIPE_SELECT(crtc->pipe);
>> -
>> - return cntl;
>> -}
>> -
>> -static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,
>> - const struct intel_plane_state *plane_state)
>> -{
>> - struct drm_i915_private *dev_priv =
>> - to_i915(plane_state->uapi.plane->dev);
>> - u32 cntl = 0;
>> -
>> - if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
>> - cntl |= MCURSOR_TRICKLE_FEED_DISABLE;
>> -
>> - switch (drm_rect_width(&plane_state->uapi.dst)) {
>> - case 64:
>> - cntl |= MCURSOR_MODE_64_ARGB_AX;
>> - break;
>> - case 128:
>> - cntl |= MCURSOR_MODE_128_ARGB_AX;
>> - break;
>> - case 256:
>> - cntl |= MCURSOR_MODE_256_ARGB_AX;
>> - break;
>> - default:
>> - MISSING_CASE(drm_rect_width(&plane_state->uapi.dst));
>> - return 0;
>> - }
>> -
>> - if (plane_state->hw.rotation & DRM_MODE_ROTATE_180)
>> - cntl |= MCURSOR_ROTATE_180;
>> -
>> - return cntl;
>> -}
>> -
>> -static bool i9xx_cursor_size_ok(const struct intel_plane_state *plane_state)
>> -{
>> - struct drm_i915_private *dev_priv =
>> - to_i915(plane_state->uapi.plane->dev);
>> - int width = drm_rect_width(&plane_state->uapi.dst);
>> - int height = drm_rect_height(&plane_state->uapi.dst);
>> -
>> - if (!intel_cursor_size_ok(plane_state))
>> - return false;
>> -
>> - /* Cursor width is limited to a few power-of-two sizes */
>> - switch (width) {
>> - case 256:
>> - case 128:
>> - case 64:
>> - break;
>> - default:
>> - return false;
>> - }
>> -
>> - /*
>> - * IVB+ have CUR_FBC_CTL which allows an arbitrary cursor
>> - * height from 8 lines up to the cursor width, when the
>> - * cursor is not rotated. Everything else requires square
>> - * cursors.
>> - */
>> - if (HAS_CUR_FBC(dev_priv) &&
>> - plane_state->hw.rotation & DRM_MODE_ROTATE_0) {
>> - if (height < 8 || height > width)
>> - return false;
>> - } else {
>> - if (height != width)
>> - return false;
>> - }
>> -
>> - return true;
>> -}
>> -
>> -static int i9xx_check_cursor(struct intel_crtc_state *crtc_state,
>> - struct intel_plane_state *plane_state)
>> -{
>> - struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
>> - struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> - const struct drm_framebuffer *fb = plane_state->hw.fb;
>> - enum pipe pipe = plane->pipe;
>> - int ret;
>> -
>> - ret = intel_check_cursor(crtc_state, plane_state);
>> - if (ret)
>> - return ret;
>> -
>> - /* if we want to turn off the cursor ignore width and height */
>> - if (!fb)
>> - return 0;
>> -
>> - /* Check for which cursor types we support */
>> - if (!i9xx_cursor_size_ok(plane_state)) {
>> - drm_dbg(&dev_priv->drm,
>> - "Cursor dimension %dx%d not supported\n",
>> - drm_rect_width(&plane_state->uapi.dst),
>> - drm_rect_height(&plane_state->uapi.dst));
>> - return -EINVAL;
>> - }
>> -
>> - drm_WARN_ON(&dev_priv->drm, plane_state->uapi.visible &&
>> - plane_state->color_plane[0].stride != fb->pitches[0]);
>> -
>> - if (fb->pitches[0] !=
>> - drm_rect_width(&plane_state->uapi.dst) * fb->format->cpp[0]) {
>> - drm_dbg_kms(&dev_priv->drm,
>> - "Invalid cursor stride (%u) (cursor width %d)\n",
>> - fb->pitches[0],
>> - drm_rect_width(&plane_state->uapi.dst));
>> - return -EINVAL;
>> - }
>> -
>> - /*
>> - * There's something wrong with the cursor on CHV pipe C.
>> - * If it straddles the left edge of the screen then
>> - * moving it away from the edge or disabling it often
>> - * results in a pipe underrun, and often that can lead to
>> - * dead pipe (constant underrun reported, and it scans
>> - * out just a solid color). To recover from that, the
>> - * display power well must be turned off and on again.
>> - * Refuse the put the cursor into that compromised position.
>> - */
>> - if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_C &&
>> - plane_state->uapi.visible && plane_state->uapi.dst.x1 < 0) {
>> - drm_dbg_kms(&dev_priv->drm,
>> - "CHV cursor C not allowed to straddle the left screen edge\n");
>> - return -EINVAL;
>> - }
>> -
>> - plane_state->ctl = i9xx_cursor_ctl(crtc_state, plane_state);
>> -
>> - return 0;
>> -}
>> -
>> -static void i9xx_update_cursor(struct intel_plane *plane,
>> - const struct intel_crtc_state *crtc_state,
>> - const struct intel_plane_state *plane_state)
>> -{
>> - struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> - enum pipe pipe = plane->pipe;
>> - u32 cntl = 0, base = 0, pos = 0, fbc_ctl = 0;
>> - unsigned long irqflags;
>> -
>> - if (plane_state && plane_state->uapi.visible) {
>> - unsigned width = drm_rect_width(&plane_state->uapi.dst);
>> - unsigned height = drm_rect_height(&plane_state->uapi.dst);
>> -
>> - cntl = plane_state->ctl |
>> - i9xx_cursor_ctl_crtc(crtc_state);
>> -
>> - if (width != height)
>> - fbc_ctl = CUR_FBC_CTL_EN | (height - 1);
>> -
>> - base = intel_cursor_base(plane_state);
>> - pos = intel_cursor_position(plane_state);
>> - }
>> -
>> - spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>> -
>> - /*
>> - * On some platforms writing CURCNTR first will also
>> - * cause CURPOS to be armed by the CURBASE write.
>> - * Without the CURCNTR write the CURPOS write would
>> - * arm itself. Thus we always update CURCNTR before
>> - * CURPOS.
>> - *
>> - * On other platforms CURPOS always requires the
>> - * CURBASE write to arm the update. Additonally
>> - * a write to any of the cursor register will cancel
>> - * an already armed cursor update. Thus leaving out
>> - * the CURBASE write after CURPOS could lead to a
>> - * cursor that doesn't appear to move, or even change
>> - * shape. Thus we always write CURBASE.
>> - *
>> - * The other registers are armed by by the CURBASE write
>> - * except when the plane is getting enabled at which time
>> - * the CURCNTR write arms the update.
>> - */
>> -
>> - if (INTEL_GEN(dev_priv) >= 9)
>> - skl_write_cursor_wm(plane, crtc_state);
>> -
>> - if (!intel_crtc_needs_modeset(crtc_state))
>> - intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, 0);
>> -
>> - if (plane->cursor.base != base ||
>> - plane->cursor.size != fbc_ctl ||
>> - plane->cursor.cntl != cntl) {
>> - if (HAS_CUR_FBC(dev_priv))
>> - intel_de_write_fw(dev_priv, CUR_FBC_CTL(pipe),
>> - fbc_ctl);
>> - intel_de_write_fw(dev_priv, CURCNTR(pipe), cntl);
>> - intel_de_write_fw(dev_priv, CURPOS(pipe), pos);
>> - intel_de_write_fw(dev_priv, CURBASE(pipe), base);
>> -
>> - plane->cursor.base = base;
>> - plane->cursor.size = fbc_ctl;
>> - plane->cursor.cntl = cntl;
>> - } else {
>> - intel_de_write_fw(dev_priv, CURPOS(pipe), pos);
>> - intel_de_write_fw(dev_priv, CURBASE(pipe), base);
>> - }
>> -
>> - spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
>> -}
>> -
>> -static void i9xx_disable_cursor(struct intel_plane *plane,
>> - const struct intel_crtc_state *crtc_state)
>> -{
>> - i9xx_update_cursor(plane, crtc_state, NULL);
>> -}
>> -
>> -static bool i9xx_cursor_get_hw_state(struct intel_plane *plane,
>> - enum pipe *pipe)
>> -{
>> - struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> - enum intel_display_power_domain power_domain;
>> - intel_wakeref_t wakeref;
>> - bool ret;
>> - u32 val;
>> -
>> - /*
>> - * Not 100% correct for planes that can move between pipes,
>> - * but that's only the case for gen2-3 which don't have any
>> - * display power wells.
>> - */
>> - power_domain = POWER_DOMAIN_PIPE(plane->pipe);
>> - wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
>> - if (!wakeref)
>> - return false;
>> -
>> - val = intel_de_read(dev_priv, CURCNTR(plane->pipe));
>> -
>> - ret = val & MCURSOR_MODE;
>> -
>> - if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
>> - *pipe = plane->pipe;
>> - else
>> - *pipe = (val & MCURSOR_PIPE_SELECT_MASK) >>
>> - MCURSOR_PIPE_SELECT_SHIFT;
>> -
>> - intel_display_power_put(dev_priv, power_domain, wakeref);
>> -
>> - return ret;
>> -}
>> -
>> /* VESA 640x480x72Hz mode to set on the pipe */
>> static const struct drm_display_mode load_detect_mode = {
>> DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
>> @@ -16609,7 +16036,7 @@ static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
>> add_wait_queue(drm_crtc_vblank_waitqueue(crtc), &wait->wait);
>> }
>>
>> -static int intel_plane_pin_fb(struct intel_plane_state *plane_state)
>> +int intel_plane_pin_fb(struct intel_plane_state *plane_state)
>> {
>> struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
>> struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
>> @@ -16639,7 +16066,7 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state)
>> return 0;
>> }
>>
>> -static void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state)
>> +void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state)
>> {
>> struct i915_vma *vma;
>>
>> @@ -16875,13 +16302,6 @@ static bool i965_plane_format_mod_supported(struct drm_plane *_plane,
>> }
>> }
>>
>> -static bool intel_cursor_format_mod_supported(struct drm_plane *_plane,
>> - u32 format, u64 modifier)
>> -{
>> - return modifier == DRM_FORMAT_MOD_LINEAR &&
>> - format == DRM_FORMAT_ARGB8888;
>> -}
>> -
>> static const struct drm_plane_funcs i965_plane_funcs = {
>> .update_plane = drm_atomic_helper_update_plane,
>> .disable_plane = drm_atomic_helper_disable_plane,
>> @@ -16900,142 +16320,6 @@ static const struct drm_plane_funcs i8xx_plane_funcs = {
>> .format_mod_supported = i8xx_plane_format_mod_supported,
>> };
>>
>> -static int
>> -intel_legacy_cursor_update(struct drm_plane *_plane,
>> - struct drm_crtc *_crtc,
>> - struct drm_framebuffer *fb,
>> - int crtc_x, int crtc_y,
>> - unsigned int crtc_w, unsigned int crtc_h,
>> - u32 src_x, u32 src_y,
>> - u32 src_w, u32 src_h,
>> - struct drm_modeset_acquire_ctx *ctx)
>> -{
>> - struct intel_plane *plane = to_intel_plane(_plane);
>> - struct intel_crtc *crtc = to_intel_crtc(_crtc);
>> - struct intel_plane_state *old_plane_state =
>> - to_intel_plane_state(plane->base.state);
>> - struct intel_plane_state *new_plane_state;
>> - struct intel_crtc_state *crtc_state =
>> - to_intel_crtc_state(crtc->base.state);
>> - struct intel_crtc_state *new_crtc_state;
>> - int ret;
>> -
>> - /*
>> - * When crtc is inactive or there is a modeset pending,
>> - * wait for it to complete in the slowpath
>> - *
>> - * FIXME bigjoiner fastpath would be good
>> - */
>> - if (!crtc_state->hw.active || intel_crtc_needs_modeset(crtc_state) ||
>> - crtc_state->update_pipe || crtc_state->bigjoiner)
>> - goto slow;
>> -
>> - /*
>> - * Don't do an async update if there is an outstanding commit modifying
>> - * the plane. This prevents our async update's changes from getting
>> - * overridden by a previous synchronous update's state.
>> - */
>> - if (old_plane_state->uapi.commit &&
>> - !try_wait_for_completion(&old_plane_state->uapi.commit->hw_done))
>> - goto slow;
>> -
>> - /*
>> - * If any parameters change that may affect watermarks,
>> - * take the slowpath. Only changing fb or position should be
>> - * in the fastpath.
>> - */
>> - if (old_plane_state->uapi.crtc != &crtc->base ||
>> - old_plane_state->uapi.src_w != src_w ||
>> - old_plane_state->uapi.src_h != src_h ||
>> - old_plane_state->uapi.crtc_w != crtc_w ||
>> - old_plane_state->uapi.crtc_h != crtc_h ||
>> - !old_plane_state->uapi.fb != !fb)
>> - goto slow;
>> -
>> - new_plane_state = to_intel_plane_state(intel_plane_duplicate_state(&plane->base));
>> - if (!new_plane_state)
>> - return -ENOMEM;
>> -
>> - new_crtc_state = to_intel_crtc_state(intel_crtc_duplicate_state(&crtc->base));
>> - if (!new_crtc_state) {
>> - ret = -ENOMEM;
>> - goto out_free;
>> - }
>> -
>> - drm_atomic_set_fb_for_plane(&new_plane_state->uapi, fb);
>> -
>> - new_plane_state->uapi.src_x = src_x;
>> - new_plane_state->uapi.src_y = src_y;
>> - new_plane_state->uapi.src_w = src_w;
>> - new_plane_state->uapi.src_h = src_h;
>> - new_plane_state->uapi.crtc_x = crtc_x;
>> - new_plane_state->uapi.crtc_y = crtc_y;
>> - new_plane_state->uapi.crtc_w = crtc_w;
>> - new_plane_state->uapi.crtc_h = crtc_h;
>> -
>> - intel_plane_copy_uapi_to_hw_state(new_plane_state, new_plane_state, crtc);
>> -
>> - ret = intel_plane_atomic_check_with_state(crtc_state, new_crtc_state,
>> - old_plane_state, new_plane_state);
>> - if (ret)
>> - goto out_free;
>> -
>> - ret = intel_plane_pin_fb(new_plane_state);
>> - if (ret)
>> - goto out_free;
>> -
>> - intel_frontbuffer_flush(to_intel_frontbuffer(new_plane_state->hw.fb),
>> - ORIGIN_FLIP);
>> - intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->hw.fb),
>> - to_intel_frontbuffer(new_plane_state->hw.fb),
>> - plane->frontbuffer_bit);
>> -
>> - /* Swap plane state */
>> - plane->base.state = &new_plane_state->uapi;
>> -
>> - /*
>> - * We cannot swap crtc_state as it may be in use by an atomic commit or
>> - * page flip that's running simultaneously. If we swap crtc_state and
>> - * destroy the old state, we will cause a use-after-free there.
>> - *
>> - * Only update active_planes, which is needed for our internal
>> - * bookkeeping. Either value will do the right thing when updating
>> - * planes atomically. If the cursor was part of the atomic update then
>> - * we would have taken the slowpath.
>> - */
>> - crtc_state->active_planes = new_crtc_state->active_planes;
>> -
>> - if (new_plane_state->uapi.visible)
>> - intel_update_plane(plane, crtc_state, new_plane_state);
>> - else
>> - intel_disable_plane(plane, crtc_state);
>> -
>> - intel_plane_unpin_fb(old_plane_state);
>> -
>> -out_free:
>> - if (new_crtc_state)
>> - intel_crtc_destroy_state(&crtc->base, &new_crtc_state->uapi);
>> - if (ret)
>> - intel_plane_destroy_state(&plane->base, &new_plane_state->uapi);
>> - else
>> - intel_plane_destroy_state(&plane->base, &old_plane_state->uapi);
>> - return ret;
>> -
>> -slow:
>> - return drm_atomic_helper_update_plane(&plane->base, &crtc->base, fb,
>> - crtc_x, crtc_y, crtc_w, crtc_h,
>> - src_x, src_y, src_w, src_h, ctx);
>> -}
>> -
>> -static const struct drm_plane_funcs intel_cursor_plane_funcs = {
>> - .update_plane = intel_legacy_cursor_update,
>> - .disable_plane = drm_atomic_helper_disable_plane,
>> - .destroy = intel_plane_destroy,
>> - .atomic_duplicate_state = intel_plane_duplicate_state,
>> - .atomic_destroy_state = intel_plane_destroy_state,
>> - .format_mod_supported = intel_cursor_format_mod_supported,
>> -};
>> -
>> static bool i9xx_plane_has_fbc(struct drm_i915_private *dev_priv,
>> enum i9xx_plane_id i9xx_plane)
>> {
>> @@ -17187,74 +16471,6 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
>> return ERR_PTR(ret);
>> }
>>
>> -static struct intel_plane *
>> -intel_cursor_plane_create(struct drm_i915_private *dev_priv,
>> - enum pipe pipe)
>> -{
>> - struct intel_plane *cursor;
>> - int ret, zpos;
>> -
>> - cursor = intel_plane_alloc();
>> - if (IS_ERR(cursor))
>> - return cursor;
>> -
>> - cursor->pipe = pipe;
>> - cursor->i9xx_plane = (enum i9xx_plane_id) pipe;
>> - cursor->id = PLANE_CURSOR;
>> - cursor->frontbuffer_bit = INTEL_FRONTBUFFER(pipe, cursor->id);
>> -
>> - if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) {
>> - cursor->max_stride = i845_cursor_max_stride;
>> - cursor->update_plane = i845_update_cursor;
>> - cursor->disable_plane = i845_disable_cursor;
>> - cursor->get_hw_state = i845_cursor_get_hw_state;
>> - cursor->check_plane = i845_check_cursor;
>> - } else {
>> - cursor->max_stride = i9xx_cursor_max_stride;
>> - cursor->update_plane = i9xx_update_cursor;
>> - cursor->disable_plane = i9xx_disable_cursor;
>> - cursor->get_hw_state = i9xx_cursor_get_hw_state;
>> - cursor->check_plane = i9xx_check_cursor;
>> - }
>> -
>> - cursor->cursor.base = ~0;
>> - cursor->cursor.cntl = ~0;
>> -
>> - if (IS_I845G(dev_priv) || IS_I865G(dev_priv) || HAS_CUR_FBC(dev_priv))
>> - cursor->cursor.size = ~0;
>> -
>> - ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base,
>> - 0, &intel_cursor_plane_funcs,
>> - intel_cursor_formats,
>> - ARRAY_SIZE(intel_cursor_formats),
>> - cursor_format_modifiers,
>> - DRM_PLANE_TYPE_CURSOR,
>> - "cursor %c", pipe_name(pipe));
>> - if (ret)
>> - goto fail;
>> -
>> - if (INTEL_GEN(dev_priv) >= 4)
>> - drm_plane_create_rotation_property(&cursor->base,
>> - DRM_MODE_ROTATE_0,
>> - DRM_MODE_ROTATE_0 |
>> - DRM_MODE_ROTATE_180);
>> -
>> - zpos = RUNTIME_INFO(dev_priv)->num_sprites[pipe] + 1;
>> - drm_plane_create_zpos_immutable_property(&cursor->base, zpos);
>> -
>> - if (INTEL_GEN(dev_priv) >= 12)
>> - drm_plane_enable_fb_damage_clips(&cursor->base);
>> -
>> - drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
>> -
>> - return cursor;
>> -
>> -fail:
>> - intel_plane_free(cursor);
>> -
>> - return ERR_PTR(ret);
>> -}
>> -
>> static int intel_crtc_late_register(struct drm_crtc *crtc)
>> {
>> intel_crtc_debugfs_add(crtc);
>> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
>> index a5771bfecba6..f0a5bf69656f 100644
>> --- a/drivers/gpu/drm/i915/display/intel_display.h
>> +++ b/drivers/gpu/drm/i915/display/intel_display.h
>> @@ -647,6 +647,18 @@ bool
>> intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info,
>> uint64_t modifier);
>>
>> +int intel_plane_compute_gtt(struct intel_plane_state *plane_state);
>> +u32 intel_plane_compute_aligned_offset(int *x, int *y,
>> + const struct intel_plane_state *state,
>> + int color_plane);
>> +int intel_plane_pin_fb(struct intel_plane_state *plane_state);
>> +void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state);
>> +
>> +/* cursor */
>> +struct intel_plane *
>> +intel_cursor_plane_create(struct drm_i915_private *dev_priv,
>> + enum pipe pipe);
>> +
>> /* modesetting */
>> void intel_modeset_init_hw(struct drm_i915_private *i915);
>> int intel_modeset_init_noirq(struct drm_i915_private *i915);
>> --
>> 2.27.0
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list