[Intel-gfx] [PATCH v4 15/16] drm/i915: Let PCON convert from RGB to YUV if it can
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Mon Dec 14 13:27:27 UTC 2020
On 12/13/2020 12:53 PM, Shankar, Uma wrote:
>
>> -----Original Message-----
>> From: Nautiyal, Ankit K <ankit.k.nautiyal at intel.com>
>> Sent: Tuesday, December 8, 2020 1:22 PM
>> To: intel-gfx at lists.freedesktop.org
>> Cc: dri-devel at lists.freedesktop.org; Shankar, Uma <uma.shankar at intel.com>;
>> airlied at linux.ie; jani.nikula at linux.intel.com; ville.syrjala at linux.intel.com;
>> Kulkarni, Vandita <vandita.kulkarni at intel.com>; Sharma, Swati2
>> <swati2.sharma at intel.com>
>> Subject: [PATCH v4 15/16] drm/i915: Let PCON convert from RGB to YUV if it can
> Make it drm/i915/display:
Noted. Will change in next version of the patch
>
>> If PCON has capability to convert RGB->YUV colorspace and also to 444->420
>> downsampling then for any YUV420 only mode, we can let the PCON do all the
>> conversion.
>>
>> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
>> ---
>> .../drm/i915/display/intel_display_types.h | 1 +
>> drivers/gpu/drm/i915/display/intel_dp.c | 37 +++++++++++++------
>> 2 files changed, 26 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
>> b/drivers/gpu/drm/i915/display/intel_display_types.h
>> index b41de41759a0..4150108bdc6d 100644
>> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
>> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
>> @@ -1460,6 +1460,7 @@ struct intel_dp {
>> int pcon_max_frl_bw, sink_max_frl_bw;
>> u8 max_bpc;
>> bool ycbcr_444_to_420;
>> + bool rgb_to_ycbcr;
>> } dfp;
>>
>> /* Display stream compression testing */ diff --git
>> a/drivers/gpu/drm/i915/display/intel_dp.c
>> b/drivers/gpu/drm/i915/display/intel_dp.c
>> index 30c76ba63232..b3f1190d8150 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> @@ -651,6 +651,10 @@ intel_dp_output_format(struct drm_connector
>> *connector,
>> !drm_mode_is_420_only(info, mode))
>> return INTEL_OUTPUT_FORMAT_RGB;
>>
>> + if (intel_dp->dfp.rgb_to_ycbcr &&
>> + intel_dp->dfp.ycbcr_444_to_420)
>> + return INTEL_OUTPUT_FORMAT_RGB;
>> +
>> if (intel_dp->dfp.ycbcr_444_to_420)
>> return INTEL_OUTPUT_FORMAT_YCBCR444;
>> else
>> @@ -4365,13 +4369,12 @@ void intel_dp_configure_protocol_converter(struct
>> intel_dp *intel_dp)
>> "Failed to set protocol converter YCbCr 4:2:0
>> conversion mode to %s\n",
>> enableddisabled(intel_dp->dfp.ycbcr_444_to_420));
>>
>> - tmp = 0;
>> -
>> - if (drm_dp_dpcd_writeb(&intel_dp->aux,
>> - DP_PROTOCOL_CONVERTER_CONTROL_2, tmp) <= 0)
>> + tmp = intel_dp->dfp.rgb_to_ycbcr ?
>> + DP_CONVERSION_BT601_RGB_YCBCR_ENABLE : 0;
> There are other combinations also possible like BT709 and BT2020. Handle those as well here.
> If no colorspace data is provided we can make BT601 as default, but if user chooses a colorspace
> and pcon supports it, then we should go for that option. We can get that info from connector
> colorspace properties.
Agreed. I will take into account color space in version of the patch.
For DP we set vsc.colorspace in pipe_config from connector colorspace,
so I can use that information to take a call if its rec 709 or BT2020.
As suggested will use BT601 as default.
Thanks & Regards,
Ankit
>
>> + if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) <= 0)
>> drm_dbg_kms(&i915->drm,
>> - "Failed to set protocol converter YCbCr 4:2:2
>> conversion mode to %s\n",
>> - enableddisabled(false));
>> + "Failed to set protocol converter RGB->YCbCr
>> conversion mode to %s\n",
>> + enableddisabled(intel_dp->dfp.rgb_to_ycbcr));
>> }
>>
>> static void intel_enable_dp(struct intel_atomic_state *state, @@ -6897,7
>> +6900,7 @@ intel_dp_update_420(struct intel_dp *intel_dp) {
>> struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>> struct intel_connector *connector = intel_dp->attached_connector;
>> - bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420;
>> + bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420, rgb_to_ycbcr;
>>
>> /* No YCbCr output support on gmch platforms */
>> if (HAS_GMCH(i915))
>> @@ -6919,14 +6922,23 @@ intel_dp_update_420(struct intel_dp *intel_dp)
>> dp_to_dig_port(intel_dp)->lspcon.active ||
>> drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd,
>> intel_dp-
>>> downstream_ports);
>> + rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp-
>>> dpcd,
>> + intel_dp-
>>> downstream_ports);
>> if (INTEL_GEN(i915) >= 11) {
>> + /* Let PCON convert from RGB->YCbCr if possible */
>> + if (is_branch && rgb_to_ycbcr && ycbcr_444_to_420) {
>> + intel_dp->dfp.rgb_to_ycbcr = true;
>> + intel_dp->dfp.ycbcr_444_to_420 = true;
>> + connector->base.ycbcr_420_allowed = true;
>> + } else {
>> /* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */
>> - intel_dp->dfp.ycbcr_444_to_420 =
>> - ycbcr_444_to_420 && !ycbcr_420_passthrough;
>> + intel_dp->dfp.ycbcr_444_to_420 =
>> + ycbcr_444_to_420 && !ycbcr_420_passthrough;
>>
>> - connector->base.ycbcr_420_allowed =
>> - !is_branch || ycbcr_444_to_420 ||
>> ycbcr_420_passthrough;
>> + connector->base.ycbcr_420_allowed =
>> + !is_branch || ycbcr_444_to_420 ||
>> ycbcr_420_passthrough;
>> + }
>> } else {
>> /* 4:4:4->4:2:0 conversion is the only way */
>> intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420; @@ -
>> 6935,8 +6947,9 @@ intel_dp_update_420(struct intel_dp *intel_dp)
>> }
>>
>> drm_dbg_kms(&i915->drm,
>> - "[CONNECTOR:%d:%s] YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4-
>>> 4:2:0 conversion? %s\n",
>> + "[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0
>> +allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n",
>> connector->base.base.id, connector->base.name,
>> + yesno(intel_dp->dfp.rgb_to_ycbcr),
>> yesno(connector->base.ycbcr_420_allowed),
>> yesno(intel_dp->dfp.ycbcr_444_to_420));
>> }
>> --
>> 2.17.1
More information about the Intel-gfx
mailing list