[Intel-gfx] [PATCH 10/16] drm/i915: migrate hsw fdi code to new file.
Dave Airlie
airlied at gmail.com
Mon Dec 21 04:03:51 UTC 2020
From: Dave Airlie <airlied at redhat.com>
Daniel asked for this, but it's a bit messy and I'm not sure
how best to clean it up yet.
Signed-off-by: Dave Airlie <airlied at redhat.com>
[Jani: also moved fdi buf trans to intel_fdi.c.]
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/display/intel_crt.c | 1 +
drivers/gpu/drm/i915/display/intel_ddi.c | 151 ++---------------------
drivers/gpu/drm/i915/display/intel_ddi.h | 8 +-
drivers/gpu/drm/i915/display/intel_fdi.c | 139 +++++++++++++++++++++
drivers/gpu/drm/i915/display/intel_fdi.h | 3 +
5 files changed, 156 insertions(+), 146 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 4934edd51cb0..077ebc7e6396 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -38,6 +38,7 @@
#include "intel_crt.h"
#include "intel_ddi.h"
#include "intel_display_types.h"
+#include "intel_fdi.h"
#include "intel_fifo_underrun.h"
#include "intel_gmbus.h"
#include "intel_hotplug.h"
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 428283f2d23d..f799143f97cf 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -36,10 +36,11 @@
#include "intel_ddi_buf_trans.h"
#include "intel_display_types.h"
#include "intel_dp.h"
-#include "intel_dp_mst.h"
#include "intel_dp_link_training.h"
+#include "intel_dp_mst.h"
#include "intel_dpio_phy.h"
#include "intel_dsi.h"
+#include "intel_fdi.h"
#include "intel_fifo_underrun.h"
#include "intel_gmbus.h"
#include "intel_hdcp.h"
@@ -89,8 +90,8 @@ static int intel_ddi_hdmi_level(struct intel_encoder *encoder,
* values in advance. This function programs the correct values for
* DP/eDP/FDI use cases.
*/
-static void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state)
+void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 iboost_bit = 0;
@@ -152,8 +153,8 @@ static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder,
ddi_translations[level].trans2);
}
-static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
- enum port port)
+void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
+ enum port port)
{
if (IS_BROXTON(dev_priv)) {
udelay(16);
@@ -181,7 +182,7 @@ static void intel_wait_ddi_buf_active(struct drm_i915_private *dev_priv,
port_name(port));
}
-static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
+u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
{
switch (pll->info->id) {
case DPLL_ID_WRPLL1:
@@ -241,144 +242,6 @@ static u32 icl_pll_to_ddi_clk_sel(struct intel_encoder *encoder,
}
}
-/* Starting with Haswell, different DDI ports can work in FDI mode for
- * connection to the PCH-located connectors. For this, it is necessary to train
- * both the DDI port and PCH receiver for the desired DDI buffer settings.
- *
- * The recommended port to work in FDI mode is DDI E, which we use here. Also,
- * please note that when FDI mode is active on DDI E, it shares 2 lines with
- * DDI A (which is used for eDP)
- */
-
-void hsw_fdi_link_train(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- u32 temp, i, rx_ctl_val, ddi_pll_sel;
- int n_entries;
-
- intel_ddi_get_buf_trans_fdi(dev_priv, &n_entries);
-
- intel_prepare_dp_ddi_buffers(encoder, crtc_state);
-
- /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
- * mode set "sequence for CRT port" document:
- * - TP1 to TP2 time with the default value
- * - FDI delay to 90h
- *
- * WaFDIAutoLinkSetTimingOverrride:hsw
- */
- intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A),
- FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
- /* Enable the PCH Receiver FDI PLL */
- rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
- FDI_RX_PLL_ENABLE |
- FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
- intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
- intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
- udelay(220);
-
- /* Switch from Rawclk to PCDclk */
- rx_ctl_val |= FDI_PCDCLK;
- intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
-
- /* Configure Port Clock Select */
- ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll);
- intel_de_write(dev_priv, PORT_CLK_SEL(PORT_E), ddi_pll_sel);
- drm_WARN_ON(&dev_priv->drm, ddi_pll_sel != PORT_CLK_SEL_SPLL);
-
- /* Start the training iterating through available voltages and emphasis,
- * testing each value twice. */
- for (i = 0; i < n_entries * 2; i++) {
- /* Configure DP_TP_CTL with auto-training */
- intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
- DP_TP_CTL_FDI_AUTOTRAIN |
- DP_TP_CTL_ENHANCED_FRAME_ENABLE |
- DP_TP_CTL_LINK_TRAIN_PAT1 |
- DP_TP_CTL_ENABLE);
-
- /* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
- * DDI E does not support port reversal, the functionality is
- * achieved on the PCH side in FDI_RX_CTL, so no need to set the
- * port reversal bit */
- intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E),
- DDI_BUF_CTL_ENABLE | ((crtc_state->fdi_lanes - 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2));
- intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
-
- udelay(600);
-
- /* Program PCH FDI Receiver TU */
- intel_de_write(dev_priv, FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64));
-
- /* Enable PCH FDI Receiver with auto-training */
- rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
- intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
- intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
-
- /* Wait for FDI receiver lane calibration */
- udelay(30);
-
- /* Unset FDI_RX_MISC pwrdn lanes */
- temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
- temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
- intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
- intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
-
- /* Wait for FDI auto training time */
- udelay(5);
-
- temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E));
- if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
- drm_dbg_kms(&dev_priv->drm,
- "FDI link training done on step %d\n", i);
- break;
- }
-
- /*
- * Leave things enabled even if we failed to train FDI.
- * Results in less fireworks from the state checker.
- */
- if (i == n_entries * 2 - 1) {
- drm_err(&dev_priv->drm, "FDI link training failed!\n");
- break;
- }
-
- rx_ctl_val &= ~FDI_RX_ENABLE;
- intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
- intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
-
- temp = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_E));
- temp &= ~DDI_BUF_CTL_ENABLE;
- intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), temp);
- intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
-
- /* Disable DP_TP_CTL and FDI_RX_CTL and retry */
- temp = intel_de_read(dev_priv, DP_TP_CTL(PORT_E));
- temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
- temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
- intel_de_write(dev_priv, DP_TP_CTL(PORT_E), temp);
- intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E));
-
- intel_wait_ddi_buf_idle(dev_priv, PORT_E);
-
- /* Reset FDI_RX_MISC pwrdn lanes */
- temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
- temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
- temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
- intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
- intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
- }
-
- /* Enable normal pixel sending for FDI */
- intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
- DP_TP_CTL_FDI_AUTOTRAIN |
- DP_TP_CTL_LINK_TRAIN_NORMAL |
- DP_TP_CTL_ENHANCED_FRAME_ENABLE |
- DP_TP_CTL_ENABLE);
-}
-
static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.h b/drivers/gpu/drm/i915/display/intel_ddi.h
index dcc711cfe4fe..340031f99aad 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.h
+++ b/drivers/gpu/drm/i915/display/intel_ddi.h
@@ -17,6 +17,7 @@ struct intel_crtc_state;
struct intel_dp;
struct intel_dpll_hw_state;
struct intel_encoder;
+struct intel_shared_dpll;
enum transcoder;
i915_reg_t dp_tp_ctl_reg(struct intel_encoder *encoder,
@@ -27,8 +28,11 @@ void intel_ddi_fdi_post_disable(struct intel_atomic_state *state,
struct intel_encoder *intel_encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state);
-void hsw_fdi_link_train(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state);
+u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll);
+void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state);
+void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
+ enum port port);
void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port);
bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/display/intel_fdi.c b/drivers/gpu/drm/i915/display/intel_fdi.c
index b2eb96ae10a2..77df675e607e 100644
--- a/drivers/gpu/drm/i915/display/intel_fdi.c
+++ b/drivers/gpu/drm/i915/display/intel_fdi.c
@@ -3,6 +3,8 @@
* Copyright © 2020 Intel Corporation
*/
#include "intel_atomic.h"
+#include "intel_ddi.h"
+#include "intel_ddi_buf_trans.h"
#include "intel_display_types.h"
#include "intel_fdi.h"
@@ -550,6 +552,143 @@ static void ivb_manual_fdi_link_train(struct intel_crtc *crtc,
drm_dbg_kms(&dev_priv->drm, "FDI train done.\n");
}
+/* Starting with Haswell, different DDI ports can work in FDI mode for
+ * connection to the PCH-located connectors. For this, it is necessary to train
+ * both the DDI port and PCH receiver for the desired DDI buffer settings.
+ *
+ * The recommended port to work in FDI mode is DDI E, which we use here. Also,
+ * please note that when FDI mode is active on DDI E, it shares 2 lines with
+ * DDI A (which is used for eDP)
+ */
+void hsw_fdi_link_train(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ u32 temp, i, rx_ctl_val, ddi_pll_sel;
+ int n_entries;
+
+ intel_ddi_get_buf_trans_fdi(dev_priv, &n_entries);
+
+ intel_prepare_dp_ddi_buffers(encoder, crtc_state);
+
+ /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
+ * mode set "sequence for CRT port" document:
+ * - TP1 to TP2 time with the default value
+ * - FDI delay to 90h
+ *
+ * WaFDIAutoLinkSetTimingOverrride:hsw
+ */
+ intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A),
+ FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+ /* Enable the PCH Receiver FDI PLL */
+ rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
+ FDI_RX_PLL_ENABLE |
+ FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
+ intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
+ intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
+ udelay(220);
+
+ /* Switch from Rawclk to PCDclk */
+ rx_ctl_val |= FDI_PCDCLK;
+ intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
+
+ /* Configure Port Clock Select */
+ ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll);
+ intel_de_write(dev_priv, PORT_CLK_SEL(PORT_E), ddi_pll_sel);
+ drm_WARN_ON(&dev_priv->drm, ddi_pll_sel != PORT_CLK_SEL_SPLL);
+
+ /* Start the training iterating through available voltages and emphasis,
+ * testing each value twice. */
+ for (i = 0; i < n_entries * 2; i++) {
+ /* Configure DP_TP_CTL with auto-training */
+ intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
+ DP_TP_CTL_FDI_AUTOTRAIN |
+ DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+ DP_TP_CTL_LINK_TRAIN_PAT1 |
+ DP_TP_CTL_ENABLE);
+
+ /* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
+ * DDI E does not support port reversal, the functionality is
+ * achieved on the PCH side in FDI_RX_CTL, so no need to set the
+ * port reversal bit */
+ intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E),
+ DDI_BUF_CTL_ENABLE | ((crtc_state->fdi_lanes - 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2));
+ intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
+
+ udelay(600);
+
+ /* Program PCH FDI Receiver TU */
+ intel_de_write(dev_priv, FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64));
+
+ /* Enable PCH FDI Receiver with auto-training */
+ rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
+ intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
+ intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
+
+ /* Wait for FDI receiver lane calibration */
+ udelay(30);
+
+ /* Unset FDI_RX_MISC pwrdn lanes */
+ temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
+ temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+ intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
+ intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
+
+ /* Wait for FDI auto training time */
+ udelay(5);
+
+ temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E));
+ if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
+ drm_dbg_kms(&dev_priv->drm,
+ "FDI link training done on step %d\n", i);
+ break;
+ }
+
+ /*
+ * Leave things enabled even if we failed to train FDI.
+ * Results in less fireworks from the state checker.
+ */
+ if (i == n_entries * 2 - 1) {
+ drm_err(&dev_priv->drm, "FDI link training failed!\n");
+ break;
+ }
+
+ rx_ctl_val &= ~FDI_RX_ENABLE;
+ intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
+ intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
+
+ temp = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_E));
+ temp &= ~DDI_BUF_CTL_ENABLE;
+ intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), temp);
+ intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
+
+ /* Disable DP_TP_CTL and FDI_RX_CTL and retry */
+ temp = intel_de_read(dev_priv, DP_TP_CTL(PORT_E));
+ temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
+ intel_de_write(dev_priv, DP_TP_CTL(PORT_E), temp);
+ intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E));
+
+ intel_wait_ddi_buf_idle(dev_priv, PORT_E);
+
+ /* Reset FDI_RX_MISC pwrdn lanes */
+ temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
+ temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+ temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
+ intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
+ intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
+ }
+
+ /* Enable normal pixel sending for FDI */
+ intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
+ DP_TP_CTL_FDI_AUTOTRAIN |
+ DP_TP_CTL_LINK_TRAIN_NORMAL |
+ DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+ DP_TP_CTL_ENABLE);
+}
+
void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
diff --git a/drivers/gpu/drm/i915/display/intel_fdi.h b/drivers/gpu/drm/i915/display/intel_fdi.h
index a9cd21663eb8..af01d2c173a8 100644
--- a/drivers/gpu/drm/i915/display/intel_fdi.h
+++ b/drivers/gpu/drm/i915/display/intel_fdi.h
@@ -9,6 +9,7 @@
struct drm_i915_private;
struct intel_crtc;
struct intel_crtc_state;
+struct intel_encoder;
#define I915_DISPLAY_CONFIG_RETRY 1
int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
@@ -18,5 +19,7 @@ void ilk_fdi_disable(struct intel_crtc *crtc);
void ilk_fdi_pll_disable(struct intel_crtc *intel_crtc);
void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state);
void intel_fdi_init_hook(struct drm_i915_private *dev_priv);
+void hsw_fdi_link_train(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state);
#endif
--
2.27.0
More information about the Intel-gfx
mailing list