[Intel-gfx] [V7 6/9] drm/i915/dsi: Configure TE interrupt for cmd mode

Vandita Kulkarni vandita.kulkarni at intel.com
Mon Feb 3 12:47:32 UTC 2020


We need to configure TE interrupt in two places.
Port interrupt and DSI interrupt mask registers.

v2: Hide the private flags check inside configure_te (Jani)

v3: Fix the position of masking de_port_masked for DSI_TE.

v4: Simplify the caller of configure_te (Jani)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 49 +++++++++++++++++++++++++++++++--
 1 file changed, 47 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5c2b419c0603..ea0fa957b363 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -41,6 +41,7 @@
 #include "display/intel_hotplug.h"
 #include "display/intel_lpe_audio.h"
 #include "display/intel_psr.h"
+#include "display/intel_dsi.h"
 
 #include "gt/intel_gt.h"
 #include "gt/intel_gt_irq.h"
@@ -2587,12 +2588,45 @@ int ilk_enable_vblank(struct drm_crtc *crtc)
 	return 0;
 }
 
+static bool gen11_dsi_configure_te(struct intel_crtc *intel_crtc,
+				   bool enable)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+	struct intel_crtc_state *config = intel_crtc->config;
+	struct drm_display_mode *mode = &config->hw.adjusted_mode;
+	enum port port;
+	u32 tmp;
+
+	if (!(mode->private_flags &
+	    (I915_MODE_FLAG_DSI_USE_TE1 | I915_MODE_FLAG_DSI_USE_TE0)))
+		return false;
+
+	/* for dual link cases we consider TE from slave */
+	if (mode->private_flags & I915_MODE_FLAG_DSI_USE_TE1)
+		port = PORT_B;
+	else
+		port = PORT_A;
+
+	tmp =  I915_READ(DSI_INTR_MASK_REG(port));
+	if (enable)
+		tmp &= ~DSI_TE_EVENT;
+	else
+		tmp |= DSI_TE_EVENT;
+
+	I915_WRITE(DSI_INTR_MASK_REG(port), tmp);
+	return true;
+}
+
 int bdw_enable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
-	enum pipe pipe = to_intel_crtc(crtc)->pipe;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	enum pipe pipe = intel_crtc->pipe;
 	unsigned long irqflags;
 
+	if (gen11_dsi_configure_te(intel_crtc, true))
+		return 0;
+
 	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
 	bdw_enable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK);
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
@@ -2658,9 +2692,13 @@ void ilk_disable_vblank(struct drm_crtc *crtc)
 void bdw_disable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
-	enum pipe pipe = to_intel_crtc(crtc)->pipe;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	enum pipe pipe = intel_crtc->pipe;
 	unsigned long irqflags;
 
+	if (gen11_dsi_configure_te(intel_crtc, false))
+		return;
+
 	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
 	bdw_disable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK);
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
@@ -3353,6 +3391,13 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 	if (IS_CNL_WITH_PORT_F(dev_priv) || INTEL_GEN(dev_priv) >= 11)
 		de_port_masked |= CNL_AUX_CHANNEL_F;
 
+	if (INTEL_GEN(dev_priv) >= 11) {
+		enum port port;
+
+		if (intel_bios_is_dsi_present(dev_priv, &port))
+			de_port_masked |= DSI0_TE | DSI1_TE;
+	}
+
 	de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
 					   GEN8_PIPE_FIFO_UNDERRUN;
 
-- 
2.21.0.5.gaeb582a



More information about the Intel-gfx mailing list