[Intel-gfx] [V7 8/9] drm/i915/dsi: Initiate fame request in cmd mode

[Vandita Kulkarni]

In TE Gate mode, on every flip we need to set the
frame update request bit. After this  bit is set
transcoder hardware will automatically send the
frame data to the panel when it receives the TE event.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c       | 26 ++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_display.c | 12 +++++++++
 drivers/gpu/drm/i915/display/intel_dsi.h     |  3 +++
 3 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 2d3ec5c3e1de..439f0afe7e47 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -202,6 +202,32 @@ static int dsi_send_pkt_payld(struct intel_dsi_host *host,
 	return 0;
 }
 
+void gen11_dsi_frame_update(struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	u32 tmp, private_flags;
+	enum port port;
+
+	private_flags = crtc_state->hw.adjusted_mode.private_flags;
+
+	/*
+	 * case 1 also covers dual link
+	 * In case of dual link, frame update should be set on
+	 * DSI_0
+	 */
+	if (private_flags & I915_MODE_FLAG_DSI_USE_TE0)
+		port = PORT_A;
+	else if (private_flags & I915_MODE_FLAG_DSI_USE_TE1)
+		port = PORT_B;
+	else
+		return;
+
+	tmp = I915_READ(DSI_CMD_FRMCTL(port));
+	tmp |= DSI_FRAME_UPDATE_REQUEST;
+	I915_WRITE(DSI_CMD_FRMCTL(port), tmp);
+}
+
 static void dsi_program_swing_and_deemphasis(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index b0af37fb6d4a..b9701db018a9 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15712,6 +15712,18 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 			intel_color_load_luts(new_crtc_state);
 	}
 
+	/*
+	 * Incase of mipi dsi command mode, we need to set frame update
+	 * for every commit
+	 */
+	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
+		if ((INTEL_GEN(dev_priv) >= 11) &&
+		    (intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))) {
+			if (new_crtc_state->hw.active)
+				gen11_dsi_frame_update(new_crtc_state);
+		}
+	}
+
 	/*
 	 * Now that the vblank has passed, we can go ahead and program the
 	 * optimal watermarks on platforms that need two-step watermark
diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
index 19f78a4022d3..08f1f586eefb 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi.h
+++ b/drivers/gpu/drm/i915/display/intel_dsi.h
@@ -205,6 +205,9 @@ u32 bxt_dsi_get_pclk(struct intel_encoder *encoder,
 		     struct intel_crtc_state *config);
 void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port);
 
+/* icl_dsi.c */
+void gen11_dsi_frame_update(struct intel_crtc_state *crtc_state);
+
 /* intel_dsi_vbt.c */
 bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
 void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on);
-- 
2.21.0.5.gaeb582a