[Intel-gfx] [PATCH v2 3/3] drm/i915/dp: Add all tiled and port sync conns to modeset
Manasi Navare
manasi.d.navare at intel.com
Mon Feb 10 11:03:35 UTC 2020
On Wed, Feb 05, 2020 at 04:32:48PM +0200, Ville Syrjälä wrote:
> On Sun, Feb 02, 2020 at 11:47:56PM -0800, Manasi Navare wrote:
> > If one of the synced crtcs needs a full modeset, we need
> > to make sure all the synced crtcs are forced a full
> > modeset.
> >
> > v2:
> > * Add tiles based on cpu_trans check (Ville)
> >
> > Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 85 -----------
> > drivers/gpu/drm/i915/display/intel_dp.c | 142 ++++++++++++++++++-
> > 2 files changed, 141 insertions(+), 86 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index a943787167de..6383d1287472 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -14669,76 +14669,6 @@ static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state,
> > return false;
> > }
> >
> > -static int
> > -intel_modeset_all_tiles(struct intel_atomic_state *state, int tile_grp_id)
> > -{
> > - struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > - struct drm_connector *connector;
> > - struct drm_connector_list_iter conn_iter;
> > - int ret = 0;
> > -
> > - drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > - drm_for_each_connector_iter(connector, &conn_iter) {
> > - struct drm_connector_state *conn_state;
> > - struct drm_crtc_state *crtc_state;
> > -
> > - if (!connector->has_tile ||
> > - connector->tile_group->id != tile_grp_id)
> > - continue;
> > - conn_state = drm_atomic_get_connector_state(&state->base,
> > - connector);
> > - if (IS_ERR(conn_state)) {
> > - ret = PTR_ERR(conn_state);
> > - break;
> > - }
> > -
> > - if (!conn_state->crtc)
> > - continue;
> > -
> > - crtc_state = drm_atomic_get_crtc_state(&state->base,
> > - conn_state->crtc);
> > - if (IS_ERR(crtc_state)) {
> > - ret = PTR_ERR(crtc_state);
> > - break;
> > - }
> > - crtc_state->mode_changed = true;
> > - ret = drm_atomic_add_affected_connectors(&state->base,
> > - conn_state->crtc);
> > - if (ret)
> > - break;
> > - }
> > - drm_connector_list_iter_end(&conn_iter);
> > -
> > - return ret;
> > -}
> > -
> > -static int
> > -intel_atomic_check_tiled_conns(struct intel_atomic_state *state)
> > -{
> > - struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > - struct drm_connector *connector;
> > - struct drm_connector_state *old_conn_state, *new_conn_state;
> > - int i, ret;
> > -
> > - if (INTEL_GEN(dev_priv) < 11)
> > - return 0;
> > -
> > - /* Is tiled, mark all other tiled CRTCs as needing a modeset */
> > - for_each_oldnew_connector_in_state(&state->base, connector,
> > - old_conn_state, new_conn_state, i) {
> > - if (!connector->has_tile)
> > - continue;
> > - if (!intel_connector_needs_modeset(state, connector))
> > - continue;
> > -
> > - ret = intel_modeset_all_tiles(state, connector->tile_group->id);
> > - if (ret)
> > - return ret;
> > - }
> > -
> > - return 0;
> > -}
> > -
> > /**
> > * intel_atomic_check - validate state object
> > * @dev: drm device
> > @@ -14767,21 +14697,6 @@ static int intel_atomic_check(struct drm_device *dev,
> > if (ret)
> > goto fail;
> >
> > - /**
> > - * This check adds all the connectors in current state that belong to
> > - * the same tile group to a full modeset.
> > - * This function directly sets the mode_changed to true and we also call
> > - * drm_atomic_add_affected_connectors(). Hence we are not explicitly
> > - * calling drm_atomic_helper_check_modeset() after this.
> > - *
> > - * Fixme: Handle some corner cases where one of the
> > - * tiled connectors gets disconnected and tile info is lost but since it
> > - * was previously synced to other conn, we need to add that to the modeset.
> > - */
> > - ret = intel_atomic_check_tiled_conns(state);
> > - if (ret)
> > - goto fail;
> > -
> > for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> > new_crtc_state, i) {
> > if (!needs_modeset(new_crtc_state)) {
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index f4dede6253f8..07f0374d4409 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -6582,6 +6582,146 @@ void intel_dp_encoder_reset(struct drm_encoder *encoder)
> > }
> > }
> >
> > +static int intel_modeset_tile_group(struct intel_atomic_state *state,
> > + int tile_group_id)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > + struct drm_connector_list_iter conn_iter;
> > + struct drm_connector *connector;
> > + int ret = 0;
> > +
> > + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > + drm_for_each_connector_iter(connector, &conn_iter) {
> > + struct drm_connector_state *conn_state;
> > + struct intel_crtc_state *crtc_state;
> > + struct intel_crtc *crtc;
> > +
> > + if (!connector->has_tile ||
> > + connector->tile_group->id != tile_group_id)
> > + continue;
> > +
> > + conn_state = drm_atomic_get_connector_state(&state->base,
> > + connector);
> > + if (IS_ERR(conn_state)) {
> > + ret = PTR_ERR(conn_state);
> > + break;
> > + }
> > +
> > + crtc = to_intel_crtc(conn_state->crtc);
> > +
> > + if (!crtc)
> > + continue;
> > +
> > + crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
>
> I think this could just be get_new_crtc_state() since
> drm_atomic_get_connector_state() should have added the
> connector's crtc already to the state. Which would let us
> get rid of the error handling here.
>
Okay will make that change so just call intel_atomic_get_new_crtc_state() and no
error check for that
> > + if (IS_ERR(crtc_state)) {
> > + ret = PTR_ERR(crtc_state);
> > + break;
> > + }
> > +
> > + crtc_state->uapi.mode_changed = true;
> > +
> > + ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
> > + if (ret)
> > + break;
> > + }
> > + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > +
> > + return ret;
> > +}
> > +
> > +static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > + struct intel_crtc *crtc;
> > +
> > + if (transcoders == 0)
> > + return 0;
> > +
> > + for_each_intel_crtc(&dev_priv->drm, crtc) {
> > + struct intel_crtc_state *crtc_state;
> > + int ret;
> > +
> > + crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
> > + if (IS_ERR(crtc_state))
> > + return PTR_ERR(crtc_state);
> > +
> > + if (!crtc_state->hw.enable)
> > + continue;
> > +
> > + if (!(transcoders & BIT(crtc_state->cpu_transcoder)))
> > + continue;
> > +
> > + crtc_state->uapi.mode_changed = true;
> > +
> > + ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base);
> > + if (ret)
> > + return ret;
> > +
> > + ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
> > + if (ret)
> > + return ret;
> > +
> > + transcoders &= ~BIT(crtc_state->cpu_transcoder);
> > + }
> > +
> > + WARN_ON(transcoders != 0);
> > +
> > + return 0;
> > +}
> > +
> > +static int intel_modeset_synced_crtcs(struct intel_atomic_state *state,
> > + struct drm_connector *connector)
> > +{
> > + const struct drm_connector_state *old_conn_state =
> > + drm_atomic_get_old_connector_state(&state->base, connector);
> > + const struct intel_crtc_state *old_crtc_state;
> > + struct intel_crtc *crtc;
> > + u8 transcoders;
> > +
> > + crtc = to_intel_crtc(old_conn_state->crtc);
> > + if (!crtc)
> > + return 0;
> > +
> > + old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc);
> > +
> > + if (!old_crtc_state->hw.active)
> > + return 0;
> > +
> > + transcoders = old_crtc_state->sync_mode_slaves_mask;
> > + if (old_crtc_state->master_transcoder != INVALID_TRANSCODER)
> > + transcoders |= BIT(old_crtc_state->master_transcoder);
> > +
> > + return intel_modeset_affected_transcoders(state,
> > + transcoders &
> > + ~BIT(old_crtc_state->cpu_transcoder));
>
> As I said in the previous review cycle the '&~BIT(cpu_trans)' should
> be a nop. So can just drop it.
>
Okay will remove that and thanks for the review
Manasi
> Otherwise
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> > +}
> > +
> > +static int intel_dp_connector_atomic_check(struct drm_connector *conn,
> > + struct drm_atomic_state *_state)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(conn->dev);
> > + struct intel_atomic_state *state = to_intel_atomic_state(_state);
> > + int ret;
> > +
> > + ret = intel_digital_connector_atomic_check(conn, &state->base);
> > + if (ret)
> > + return ret;
> > +
> > + if (INTEL_GEN(dev_priv) < 11)
> > + return 0;
> > +
> > + if (!intel_connector_needs_modeset(state, conn))
> > + return 0;
> > +
> > + if (conn->has_tile) {
> > + ret = intel_modeset_tile_group(state, conn->tile_group->id);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return intel_modeset_synced_crtcs(state, conn);
> > +}
> > +
> > static const struct drm_connector_funcs intel_dp_connector_funcs = {
> > .force = intel_dp_force,
> > .fill_modes = drm_helper_probe_single_connector_modes,
> > @@ -6598,7 +6738,7 @@ static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs =
> > .detect_ctx = intel_dp_detect,
> > .get_modes = intel_dp_get_modes,
> > .mode_valid = intel_dp_mode_valid,
> > - .atomic_check = intel_digital_connector_atomic_check,
> > + .atomic_check = intel_dp_connector_atomic_check,
> > };
> >
> > static const struct drm_encoder_funcs intel_dp_enc_funcs = {
> > --
> > 2.19.1
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list