[Intel-gfx] [PATCH v2 06/12] drm/i915/dp_aux_backlight: convert to drm_device based logging macros.
Jani Nikula
jani.nikula at linux.intel.com
Tue Feb 11 14:08:28 UTC 2020
On Thu, 06 Feb 2020, Wambui Karuga <wambui.karugax at gmail.com> wrote:
> Conversion of the printk based drm logging macros to the struct
> drm_device based logging macros in display/intel_dp_aux_backlight.c.
> This also involves extracting the drm_i915_private device pointer from
> various intel types to use in the macros.
>
> Note that this converts DRM_DEBUG_DRIVER to drm_dbg().
>
> References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
> Signed-off-by: Wambui Karuga <wambui.karugax at gmail.com>
I'm holding on with this one for a bit, as I'd probably like to get
other changes merged to this file first. Sorry.
BR,
Jani.
> ---
> .../drm/i915/display/intel_dp_aux_backlight.c | 72 ++++++++++++-------
> 1 file changed, 45 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> index e86feebef299..83d9c76e4da9 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> @@ -35,8 +35,9 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
>
> if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
> ®_val) < 0) {
> - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
> - DP_EDP_DISPLAY_CONTROL_REGISTER);
> + drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
> + "Failed to read DPCD register 0x%x\n",
> + DP_EDP_DISPLAY_CONTROL_REGISTER);
> return;
> }
> if (enable)
> @@ -46,8 +47,9 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
>
> if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
> reg_val) != 1) {
> - DRM_DEBUG_KMS("Failed to %s aux backlight\n",
> - enable ? "enable" : "disable");
> + drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
> + "Failed to %s aux backlight\n",
> + enable ? "enable" : "disable");
> }
> }
>
> @@ -65,8 +67,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
> if (drm_dp_dpcd_readb(&intel_dp->aux,
> DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> &mode_reg) != 1) {
> - DRM_DEBUG_KMS("Failed to read the DPCD register 0x%x\n",
> - DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> + drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
> + "Failed to read the DPCD register 0x%x\n",
> + DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> return 0;
> }
>
> @@ -80,8 +83,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
>
> if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> &read_val, sizeof(read_val)) < 0) {
> - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
> - DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
> + drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
> + "Failed to read DPCD register 0x%x\n",
> + DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
> return 0;
> }
> level = read_val[0];
> @@ -111,7 +115,8 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
> }
> if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> vals, sizeof(vals)) < 0) {
> - DRM_DEBUG_KMS("Failed to write aux backlight level\n");
> + drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
> + "Failed to write aux backlight level\n");
> return;
> }
> }
> @@ -133,7 +138,8 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
>
> freq = dev_priv->vbt.backlight.pwm_freq_hz;
> if (!freq) {
> - DRM_DEBUG_KMS("Use panel default backlight frequency\n");
> + drm_dbg_kms(&dev_priv->drm,
> + "Use panel default backlight frequency\n");
> return false;
> }
>
> @@ -146,13 +152,14 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
> fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
>
> if (fxp_min > fxp_actual || fxp_actual > fxp_max) {
> - DRM_DEBUG_KMS("Actual frequency out of range\n");
> + drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n");
> return false;
> }
>
> if (drm_dp_dpcd_writeb(&intel_dp->aux,
> DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) {
> - DRM_DEBUG_KMS("Failed to write aux backlight freq\n");
> + drm_dbg_kms(&dev_priv->drm,
> + "Failed to write aux backlight freq\n");
> return false;
> }
> return true;
> @@ -162,14 +169,16 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
> const struct drm_connector_state *conn_state)
> {
> struct intel_connector *connector = to_intel_connector(conn_state->connector);
> + struct drm_i915_private *i915 = to_i915(connector->base.dev);
> struct intel_dp *intel_dp = intel_attached_dp(connector);
> struct intel_panel *panel = &connector->panel;
> u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
>
> if (drm_dp_dpcd_readb(&intel_dp->aux,
> DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
> - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
> - DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> + drm_dbg_kms(&i915->drm,
> + "Failed to read DPCD register 0x%x\n",
> + DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> return;
> }
>
> @@ -186,7 +195,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
> if (drm_dp_dpcd_writeb(&intel_dp->aux,
> DP_EDP_PWMGEN_BIT_COUNT,
> panel->backlight.pwmgen_bit_count) < 0)
> - DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
> + drm_dbg_kms(&i915->drm,
> + "Failed to write aux pwmgen bit count\n");
>
> break;
>
> @@ -203,7 +213,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
> if (new_dpcd_buf != dpcd_buf) {
> if (drm_dp_dpcd_writeb(&intel_dp->aux,
> DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
> - DRM_DEBUG_KMS("Failed to write aux backlight mode\n");
> + drm_dbg_kms(&i915->drm,
> + "Failed to write aux backlight mode\n");
> }
> }
>
> @@ -237,9 +248,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
> * minimum value will applied automatically. So no need to check that.
> */
> freq = i915->vbt.backlight.pwm_freq_hz;
> - DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", freq);
> + drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n",
> + freq);
> if (!freq) {
> - DRM_DEBUG_KMS("Use panel default backlight frequency\n");
> + drm_dbg_kms(&i915->drm,
> + "Use panel default backlight frequency\n");
> return max_backlight;
> }
>
> @@ -254,12 +267,14 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
> */
> if (drm_dp_dpcd_readb(&intel_dp->aux,
> DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) {
> - DRM_DEBUG_KMS("Failed to read pwmgen bit count cap min\n");
> + drm_dbg_kms(&i915->drm,
> + "Failed to read pwmgen bit count cap min\n");
> return max_backlight;
> }
> if (drm_dp_dpcd_readb(&intel_dp->aux,
> DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) {
> - DRM_DEBUG_KMS("Failed to read pwmgen bit count cap max\n");
> + drm_dbg_kms(&i915->drm,
> + "Failed to read pwmgen bit count cap max\n");
> return max_backlight;
> }
> pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> @@ -268,7 +283,8 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
> fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
> - DRM_DEBUG_KMS("VBT defined backlight frequency out of range\n");
> + drm_dbg_kms(&i915->drm,
> + "VBT defined backlight frequency out of range\n");
> return max_backlight;
> }
>
> @@ -279,10 +295,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
> break;
> }
>
> - DRM_DEBUG_KMS("Using eDP pwmgen bit count of %d\n", pn);
> + drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
> if (drm_dp_dpcd_writeb(&intel_dp->aux,
> DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
> - DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
> + drm_dbg_kms(&i915->drm,
> + "Failed to write aux pwmgen bit count\n");
> return max_backlight;
> }
> panel->backlight.pwmgen_bit_count = pn;
> @@ -319,7 +336,8 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
> if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
> (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
> !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) {
> - DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
> + drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
> + "AUX Backlight Control Supported!\n");
> return true;
> }
> return false;
> @@ -328,8 +346,8 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
> int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
> {
> struct intel_panel *panel = &intel_connector->panel;
> - enum intel_backlight_type type =
> - to_i915(intel_connector->base.dev)->vbt.backlight.type;
> + struct drm_i915_private *i915 = to_i915(intel_connector->base.dev);
> + enum intel_backlight_type type = i915->vbt.backlight.type;
>
> if (i915_modparams.enable_dpcd_backlight == 0 ||
> (i915_modparams.enable_dpcd_backlight == -1 &&
> @@ -337,7 +355,7 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
> return -ENODEV;
>
> if (type != INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE)
> - DRM_DEBUG_DRIVER("Ignoring VBT backlight type\n");
> + drm_dbg(&i915->drm, "Ignoring VBT backlight type\n");
>
> panel->backlight.setup = intel_dp_aux_setup_backlight;
> panel->backlight.enable = intel_dp_aux_enable_backlight;
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list