[Intel-gfx] [PATCH 3/6] drm/i915: Unify the low level dbuf code
Ville Syrjala
ville.syrjala at linux.intel.com
Thu Feb 13 18:47:57 UTC 2020
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
The low level dbuf slice code is rather inconsitent with its
functiona naming and organization. Make it more consistent.
Also share the enable/disable functions between all platforms
since the same code works just fine for all of them.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 10 ++--
.../drm/i915/display/intel_display_power.c | 46 ++++++++-----------
.../drm/i915/display/intel_display_power.h | 6 +--
3 files changed, 27 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index e331ab900336..7fb25c7655d1 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15463,9 +15463,9 @@ static void icl_dbuf_slice_pre_update(struct intel_atomic_state *state)
WARN_ON(!new_dbuf_state->base.changed);
- icl_dbuf_slices_update(dev_priv,
- old_dbuf_state->enabled_slices |
- new_dbuf_state->enabled_slices);
+ gen9_dbuf_slices_update(dev_priv,
+ old_dbuf_state->enabled_slices |
+ new_dbuf_state->enabled_slices);
}
static void icl_dbuf_slice_post_update(struct intel_atomic_state *state)
@@ -15482,8 +15482,8 @@ static void icl_dbuf_slice_post_update(struct intel_atomic_state *state)
WARN_ON(!new_dbuf_state->base.changed);
- icl_dbuf_slices_update(dev_priv,
- new_dbuf_state->enabled_slices);
+ gen9_dbuf_slices_update(dev_priv,
+ new_dbuf_state->enabled_slices);
}
static void skl_commit_modeset_enables(struct intel_atomic_state *state)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index f24f42c5c446..54715da7dc32 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -4405,15 +4405,18 @@ static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
mutex_unlock(&power_domains->lock);
}
-static void intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
- enum dbuf_slice slice, bool enable)
+static void gen9_dbuf_slice_set(struct drm_i915_private *dev_priv,
+ enum dbuf_slice slice, bool enable)
{
i915_reg_t reg = DBUF_CTL_S(slice);
bool state;
u32 val;
val = intel_de_read(dev_priv, reg);
- val = enable ? (val | DBUF_POWER_REQUEST) : (val & ~DBUF_POWER_REQUEST);
+ if (enable)
+ val |= DBUF_POWER_REQUEST;
+ else
+ val &= ~DBUF_POWER_REQUEST;
intel_de_write(dev_priv, reg, val);
intel_de_posting_read(dev_priv, reg);
udelay(10);
@@ -4424,18 +4427,8 @@ static void intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
slice, enable ? "enable" : "disable");
}
-static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
-{
- icl_dbuf_slices_update(dev_priv, BIT(DBUF_S1));
-}
-
-static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
-{
- icl_dbuf_slices_update(dev_priv, 0);
-}
-
-void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
- u8 req_slices)
+void gen9_dbuf_slices_update(struct drm_i915_private *dev_priv,
+ u8 req_slices)
{
int num_slices = INTEL_INFO(dev_priv)->num_supported_dbuf_slices;
struct i915_power_domains *power_domains = &dev_priv->power_domains;
@@ -4458,26 +4451,25 @@ void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
mutex_lock(&power_domains->lock);
for (slice = DBUF_S1; slice < num_slices; slice++)
- intel_dbuf_slice_set(dev_priv, slice,
- req_slices & BIT(slice));
+ gen9_dbuf_slice_set(dev_priv, slice, req_slices & BIT(slice));
dev_priv->dbuf.enabled_slices = req_slices;
mutex_unlock(&power_domains->lock);
}
-static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
+static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
{
- /*
- * Just power up 1 slice, we will
- * figure out later which slices we have and what we need.
- */
- icl_dbuf_slices_update(dev_priv, BIT(DBUF_S1));
+ /* TOOD: Rebase on Stan's patch adding the readout here */
+ dev_priv->dbuf.enabled_slices = intel_enabled_dbuf_slices_mask(dev_priv);
+
+ gen9_dbuf_slices_update(dev_priv, BIT(DBUF_S1) |
+ dev_priv->dbuf.enabled_slices);
}
-static void icl_dbuf_disable(struct drm_i915_private *dev_priv)
+static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
{
- icl_dbuf_slices_update(dev_priv, 0);
+ gen9_dbuf_slices_update(dev_priv, 0);
}
static void icl_mbus_init(struct drm_i915_private *dev_priv)
@@ -5021,7 +5013,7 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
intel_cdclk_init_hw(dev_priv);
/* 5. Enable DBUF. */
- icl_dbuf_enable(dev_priv);
+ gen9_dbuf_enable(dev_priv);
/* 6. Setup MBUS. */
icl_mbus_init(dev_priv);
@@ -5044,7 +5036,7 @@ static void icl_display_core_uninit(struct drm_i915_private *dev_priv)
/* 1. Disable all display engine functions -> aready done */
/* 2. Disable DBUF */
- icl_dbuf_disable(dev_priv);
+ gen9_dbuf_disable(dev_priv);
/* 3. Disable CD clock */
intel_cdclk_uninit_hw(dev_priv);
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
index 601e000ffd0d..1a275611241e 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power.h
@@ -312,13 +312,13 @@ enum dbuf_slice {
DBUF_S2,
};
+void gen9_dbuf_slices_update(struct drm_i915_private *dev_priv,
+ u8 req_slices);
+
#define with_intel_display_power(i915, domain, wf) \
for ((wf) = intel_display_power_get((i915), (domain)); (wf); \
intel_display_power_put_async((i915), (domain), (wf)), (wf) = 0)
-void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
- u8 req_slices);
-
void chv_phy_powergate_lanes(struct intel_encoder *encoder,
bool override, unsigned int mask);
bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
--
2.24.1
More information about the Intel-gfx
mailing list