[Intel-gfx] [PATCH v17 5/7] drm/i915: Added required new PCode commands
Stanislav Lisovskiy
stanislav.lisovskiy at intel.com
Thu Feb 20 12:07:39 UTC 2020
We need a new PCode request commands and reply codes
to be added as a prepartion patch for QGV points
restricting for new SAGV support.
v2: - Extracted those changes into separate patch
(Ville Syrjälä)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 4 ++++
drivers/gpu/drm/i915/intel_sideband.c | 2 ++
2 files changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b09c1d6dc0aa..b3924e9d25bc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8997,6 +8997,7 @@ enum {
#define GEN7_PCODE_ILLEGAL_DATA 0x3
#define GEN11_PCODE_ILLEGAL_SUBCOMMAND 0x4
#define GEN11_PCODE_LOCKED 0x6
+#define GEN11_PCODE_REJECTED 0x11
#define GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
#define GEN6_PCODE_WRITE_RC6VIDS 0x4
#define GEN6_PCODE_READ_RC6VIDS 0x5
@@ -9018,6 +9019,7 @@ enum {
#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd
#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8)
#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
+#define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe
#define GEN6_PCODE_READ_D_COMP 0x10
#define GEN6_PCODE_WRITE_D_COMP 0x11
#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
@@ -9030,6 +9032,8 @@ enum {
#define GEN9_SAGV_IS_DISABLED 0x1
#define GEN9_SAGV_ENABLE 0x3
#define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US 0x23
+#define GEN11_PCODE_POINTS_RESTRICTED 0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK 0x1
#define GEN6_PCODE_DATA _MMIO(0x138128)
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
index 1447e7516cb7..1e7dd6b6f103 100644
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -370,6 +370,8 @@ static inline int gen7_check_mailbox_status(u32 mbox)
return -ENXIO;
case GEN11_PCODE_LOCKED:
return -EBUSY;
+ case GEN11_PCODE_REJECTED:
+ return -EACCES;
case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
return -EOVERFLOW;
default:
--
2.24.1.485.gad05a3d8e5
More information about the Intel-gfx
mailing list