[Intel-gfx] [PATCH v18 5/8] drm/i915: Refactor intel_can_enable_sagv
Stanislav Lisovskiy
stanislav.lisovskiy at intel.com
Tue Feb 25 14:59:25 UTC 2020
Currently intel_can_enable_sagv function contains
a mix of workarounds for different platforms
some of them are not valid for gens >= 11 already,
so lets split it into separate functions.
v2:
- Rework watermark calculation algorithm to
attempt to calculate Level 0 watermark
with added sagv block time latency and
check if it fits in DBuf in order to
determine if SAGV can be enabled already
at this stage, just as BSpec 49325 states.
if that fails rollback to usual Level 0
latency and disable SAGV.
- Remove unneeded tabs(James Ausmus)
v3: Rebased the patch
v4: - Added back interlaced check for Gen12 and
added separate function for TGL SAGV check
(thanks to James Ausmus for spotting)
- Removed unneeded gen check
- Extracted Gen12 SAGV decision making code
to a separate function from skl_compute_wm
v5: - Added SAGV global state to dev_priv, because
we need to track all pipes, not only those
in atomic state. Each pipe has now correspondent
bit mask reflecting, whether it can tolerate
SAGV or not(thanks to Ville Syrjala for suggestions).
- Now using active flag instead of enable in crc
usage check.
v6: - Fixed rebase conflicts
v7: - kms_cursor_legacy seems to get broken because of multiple memcpy
calls when copying level 0 water marks for enabled SAGV, to
fix this now simply using that field right away, without copying,
for that introduced a new wm_level accessor which decides which
wm_level to return based on SAGV state.
v8: - Protect crtc_sagv_mask same way as we do for other global state
changes: i.e check if changes are needed, then grab all crtc locks
to serialize the changes(Ville Syrjälä)
- Add crtc_sagv_mask caching in order to avoid needless recalculations
(Matthew Roper)
- Put back Gen12 SAGV switch in order to get it enabled in separate
patch(Matthew Roper)
- Rename *_set_sagv_mask to *_compute_sagv_mask(Matthew Roper)
- Check if there are no active pipes in intel_can_enable_sagv
instead of platform specific functions(Matthew Roper), same
for intel_has_sagv check.
v9 - Switched to u8 for crtc_sagv_mask(Ville Syrjälä)
- crtc_sagv_mask now is pipe_sagv_mask(Ville Syrjälä)
- Extracted sagv checking logic from skl/icl/tgl_compute_sagv_mask
- Extracted skl_plane_wm_level function and passing latency to
separate patches(Ville Syrjälä)
- Removed part of unneeded copy-paste from tgl_check_pipe_fits_sagv_wm
(Ville Syrjälä)
- Now using simple assignment for sagv_wm0 as it contains only
pod types and no pointers(Ville Syrjälä)
- Fixed intel_can_enable_sagv not to do double duty, now it only
check SAGV bits by ANDing those between local and global state.
The SAGV masks are now computed after watermarks are available,
in order to be able to figure out if ddb ranges are fitting nicely.
(Ville Syrjälä)
- Now having uv_sagv_wm0 and sagv_wm0, otherwise we have wrong logic
when using skl_plane_wm_level accessor, as we had previously for
Gen11+ color plane and regular wm levels, so probably both
has to be recalculated with additional SAGV block time for Level 0.
v10: - Starting to use new global state for storing pipe_sagv_mask
v11: - Fixed rebase conflict with recent drm-tip
- Check if we really need to recalculate SAGV mask, otherwise
bail out without making any changes.
- Use cached SAGV result, instead of recalculating it everytime,
if bw_state hasn't changed.
v12: - Removed WARN from intel_can_enable_sagv, in some of the commits
if we don't recalculated watermarks, bw_state is not recalculated,
thus leading to SAGV state not recalculated by the commit state,
which is still calling intel_can_enable_sagv function. Fix that
by just analyzing the current global bw_state object - because
we simply have no other objects related to that.
v13: - Rebased, fixed warnings regarding long lines
- Changed function call sites from intel_atomic_bw* to
intel_wb_* as was suggested.(Jani Nikula)
- Taken ddb_state_changed and bw_state_changed into use.
v14: - total_affected_planes is no longer needed to check for ddb changes,
just as active_pipe_changes.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
Cc: Ville Syrjälä <ville.syrjala at intel.com>
Cc: James Ausmus <james.ausmus at intel.com>
---
drivers/gpu/drm/i915/display/intel_bw.h | 18 +
drivers/gpu/drm/i915/display/intel_display.c | 27 +-
.../drm/i915/display/intel_display_types.h | 2 +
drivers/gpu/drm/i915/intel_pm.c | 428 ++++++++++++++++--
drivers/gpu/drm/i915/intel_pm.h | 4 +-
5 files changed, 437 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h
index b5f61463922f..c32b5285c12f 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_bw.h
@@ -18,6 +18,24 @@ struct intel_crtc_state;
struct intel_bw_state {
struct intel_global_state base;
+ /*
+ * Contains a bit mask, used to determine, whether correspondent
+ * pipe allows SAGV or not.
+ */
+ u8 pipe_sagv_mask;
+
+ /*
+ * Used to determine if we already had calculated
+ * SAGV mask for this state once.
+ */
+ bool sagv_calculated;
+
+ /*
+ * Contains final SAGV decision based on current mask,
+ * to prevent doing the same job over and over again.
+ */
+ bool can_sagv;
+
unsigned int data_rate[I915_MAX_PIPES];
u8 num_active_planes[I915_MAX_PIPES];
};
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 137fb645097a..6df836cbe0cd 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14007,7 +14007,10 @@ static void verify_wm_state(struct intel_crtc *crtc,
/* Watermarks */
for (level = 0; level <= max_level; level++) {
if (skl_wm_level_equals(&hw_plane_wm->wm[level],
- &sw_plane_wm->wm[level]))
+ &sw_plane_wm->wm[level]) ||
+ (skl_wm_level_equals(&hw_plane_wm->wm[level],
+ &sw_plane_wm->sagv_wm0) &&
+ (level == 0)))
continue;
drm_err(&dev_priv->drm,
@@ -14062,7 +14065,10 @@ static void verify_wm_state(struct intel_crtc *crtc,
/* Watermarks */
for (level = 0; level <= max_level; level++) {
if (skl_wm_level_equals(&hw_plane_wm->wm[level],
- &sw_plane_wm->wm[level]))
+ &sw_plane_wm->wm[level]) ||
+ (skl_wm_level_equals(&hw_plane_wm->wm[level],
+ &sw_plane_wm->sagv_wm0) &&
+ (level == 0)))
continue;
drm_err(&dev_priv->drm,
@@ -15540,9 +15546,11 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
* SKL workaround: bspec recommends we disable the SAGV when we
* have more then one pipe enabled
*/
- if (state->bw_state_changed) {
- if (!intel_can_enable_sagv(state))
- intel_disable_sagv(dev_priv);
+ if (INTEL_GEN(dev_priv) < 11) {
+ if (state->bw_state_changed) {
+ if (!intel_can_enable_sagv(dev_priv))
+ intel_disable_sagv(dev_priv);
+ }
}
intel_modeset_verify_disabled(dev_priv, state);
@@ -15643,9 +15651,11 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
if (state->modeset)
intel_verify_planes(state);
- if (state->bw_state_changed) {
- if (intel_can_enable_sagv(state)
- intel_enable_sagv(dev_priv);
+ if (INTEL_GEN(dev_priv) < 11) {
+ if (state->bw_state_changed) {
+ if (intel_can_enable_sagv(dev_priv))
+ intel_enable_sagv(dev_priv);
+ }
}
drm_atomic_helper_commit_hw_done(&state->base);
@@ -15798,7 +15808,6 @@ static int intel_atomic_commit(struct drm_device *dev,
if (state->global_state_changed) {
assert_global_state_locked(dev_priv);
-
dev_priv->active_pipes = state->active_pipes;
}
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 12b47ba3c68d..289461571a0d 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -664,6 +664,8 @@ struct skl_plane_wm {
struct skl_wm_level wm[8];
struct skl_wm_level uv_wm[8];
struct skl_wm_level trans_wm;
+ struct skl_wm_level sagv_wm0;
+ struct skl_wm_level uv_sagv_wm0;
bool is_planar;
};
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ac4b317ea1bf..dbe82c268e40 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -42,6 +42,7 @@
#include "i915_drv.h"
#include "i915_irq.h"
#include "i915_trace.h"
+#include "display/intel_bw.h"
#include "intel_pm.h"
#include "intel_sideband.h"
#include "../../../platform/x86/intel_ips.h"
@@ -3620,7 +3621,7 @@ static bool skl_needs_memory_bw_wa(struct drm_i915_private *dev_priv)
return IS_GEN9_BC(dev_priv) || IS_BROXTON(dev_priv);
}
-static bool
+bool
intel_has_sagv(struct drm_i915_private *dev_priv)
{
/* HACK! */
@@ -3743,39 +3744,24 @@ intel_disable_sagv(struct drm_i915_private *dev_priv)
return 0;
}
-bool intel_can_enable_sagv(struct intel_atomic_state *state)
+static bool skl_can_enable_sagv_on_pipe(struct intel_atomic_state *state,
+ enum pipe pipe)
{
struct drm_device *dev = state->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc;
struct intel_plane *plane;
struct intel_crtc_state *crtc_state;
- enum pipe pipe;
int level, latency;
- if (!intel_has_sagv(dev_priv))
- return false;
-
- /*
- * If there are no active CRTCs, no additional checks need be performed
- */
- if (hweight8(state->active_pipes) == 0)
- return true;
-
- /*
- * SKL+ workaround: bspec recommends we disable SAGV when we have
- * more then one pipe enabled
- */
- if (hweight8(state->active_pipes) > 1)
- return false;
-
- /* Since we're now guaranteed to only have one active CRTC... */
- pipe = ffs(state->active_pipes) - 1;
crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
crtc_state = to_intel_crtc_state(crtc->base.state);
- if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
+ if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
+ DRM_DEBUG_KMS("No SAGV for interlaced mode on pipe %c\n",
+ pipe_name(pipe));
return false;
+ }
for_each_intel_plane_on_crtc(dev, crtc, plane) {
struct skl_plane_wm *wm =
@@ -3802,13 +3788,174 @@ bool intel_can_enable_sagv(struct intel_atomic_state *state)
* incur memory latencies higher than sagv_block_time_us we
* can't enable SAGV.
*/
- if (latency < dev_priv->sagv_block_time_us)
+ if (latency < dev_priv->sagv_block_time_us) {
+ DRM_DEBUG_KMS("Latency %d < sagv block time %d, no SAGV for pipe %c\n",
+ latency, dev_priv->sagv_block_time_us, pipe_name(pipe));
return false;
+ }
}
return true;
}
+static void skl_compute_sagv_mask(struct intel_atomic_state *state)
+{
+ struct intel_crtc *crtc;
+ enum pipe pipe;
+ struct intel_bw_state *new_bw_state = intel_bw_get_state(state);
+
+ if (IS_ERR(new_bw_state)) {
+ WARN(1, "Could not get bw_state\n");
+ return;
+ }
+
+ if (state->active_pipes != 1) {
+ new_bw_state->pipe_sagv_mask = 0;
+ DRM_DEBUG_KMS("No SAGV for multiple pipes on Gen 9\n");
+ return;
+ }
+
+ /* Since we're now guaranteed to only have one active CRTC... */
+ pipe = ffs(state->active_pipes) - 1;
+
+ if (skl_can_enable_sagv_on_pipe(state, pipe))
+ new_bw_state->pipe_sagv_mask |= BIT(crtc->pipe);
+ else
+ new_bw_state->pipe_sagv_mask &= ~BIT(crtc->pipe);
+}
+
+static void tgl_compute_sagv_mask(struct intel_atomic_state *state);
+
+static void icl_compute_sagv_mask(struct intel_atomic_state *state)
+{
+ struct intel_crtc *crtc;
+ struct intel_crtc_state *new_crtc_state;
+ int i;
+ struct intel_bw_state *new_bw_state = intel_bw_get_state(state);
+
+ if (IS_ERR(new_bw_state)) {
+ WARN(1, "Could not get bw_state\n");
+ return;
+ }
+
+ for_each_new_intel_crtc_in_state(state, crtc,
+ new_crtc_state, i) {
+ if (skl_can_enable_sagv_on_pipe(state, crtc->pipe))
+ new_bw_state->pipe_sagv_mask |= BIT(crtc->pipe);
+ else
+ new_bw_state->pipe_sagv_mask &= ~BIT(crtc->pipe);
+ }
+}
+
+static void intel_compute_sagv_mask(struct intel_atomic_state *state)
+{
+ int ret;
+ struct drm_device *dev = state->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_bw_state *new_bw_state;
+ struct intel_bw_state *old_bw_state;
+
+ /*
+ * If we are here - means either active_pipes config had changed,
+ * or watermarks/ddb has been changed, which means most likely
+ * we had crtcs added to the state(at least state is read locked)
+ * and we definitely need to recalculate SAGV state now.
+ */
+ new_bw_state = intel_bw_get_state(state);
+ old_bw_state = intel_bw_get_old_state(state);
+
+ if (IS_ERR(new_bw_state) || IS_ERR(old_bw_state)) {
+ WARN(1, "Could not get bw_state\n");
+ return;
+ }
+
+ new_bw_state->sagv_calculated = false;
+
+ /*
+ * Now once we got wm levels calculated,
+ * check if we can have SAGV.
+ */
+ if (INTEL_GEN(dev_priv) >= 12)
+ tgl_compute_sagv_mask(state);
+ else if (INTEL_GEN(dev_priv) == 11)
+ icl_compute_sagv_mask(state);
+ else
+ skl_compute_sagv_mask(state);
+
+ /*
+ * For SAGV we need to account all the pipes,
+ * not only the ones which are in state currently.
+ * Grab all locks if we detect that we are actually
+ * going to do something.
+ */
+ if (new_bw_state->pipe_sagv_mask != old_bw_state->pipe_sagv_mask) {
+ ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+ if (ret) {
+ DRM_DEBUG_KMS("Could not serialize global state\n");
+ return;
+ }
+
+ DRM_DEBUG_KMS("Marking bw state changed for atomic state %p\n", state);
+
+ state->bw_state_changed = true;
+ }
+}
+
+static bool intel_calculate_sagv_result(struct drm_i915_private *dev_priv,
+ struct intel_bw_state *bw_state)
+{
+ bool sagv_result = true;
+ enum pipe pipe;
+
+ for_each_pipe(dev_priv, pipe) {
+ /*
+ * TODO: We are depending on active_pipes here,
+ * probably it should be part of some other global state
+ * obj, like modeset_state or smth, which we should depend on.
+ * Don't want to clone it here, really.
+ */
+ int active_pipe_bit = dev_priv->active_pipes & BIT(pipe);
+
+ if (active_pipe_bit) {
+ if ((bw_state->pipe_sagv_mask & BIT(pipe)) == 0) {
+ sagv_result = false;
+ break;
+ }
+ }
+ }
+
+ return sagv_result;
+}
+
+/*
+ * This function to be used before swap state
+ */
+bool intel_can_enable_sagv_for_state(struct intel_atomic_state *state)
+{
+ struct drm_device *dev = state->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_bw_state *bw_state = intel_bw_get_state(state);
+
+ if (IS_ERR(bw_state)) {
+ WARN(1, "Could not get bw_state\n");
+ return false;
+ }
+
+ if (!intel_has_sagv(dev_priv)) {
+ DRM_DEBUG_KMS("No SAGV support detected\n");
+ return false;
+ }
+
+ if (bw_state->sagv_calculated)
+ goto out;
+
+ bw_state->can_sagv = intel_calculate_sagv_result(dev_priv, bw_state);
+ bw_state->sagv_calculated = true;
+
+out:
+ return bw_state->can_sagv;
+}
+
/*
* Calculate initial DBuf slice offset, based on slice size
* and mask(i.e if slice size is 1024 and second slice is enabled
@@ -3842,6 +3989,35 @@ static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv)
return ddb_size;
}
+/*
+ * To be used after we swap state
+ */
+bool intel_can_enable_sagv(struct drm_i915_private *dev_priv)
+{
+ struct intel_global_state *global_state;
+ struct intel_bw_state *bw_state;
+
+ global_state = dev_priv->bw_obj.state;
+ if (IS_ERR(global_state)) {
+ WARN(1, "Could not get global state\n");
+ return false;
+ }
+
+ /*
+ * TODO: Should we still may be lock global state here?
+ */
+ bw_state = to_intel_bw_state(global_state);
+
+ if (bw_state->sagv_calculated)
+ goto out;
+
+ bw_state->can_sagv = intel_calculate_sagv_result(dev_priv, bw_state);
+ bw_state->sagv_calculated = true;
+
+out:
+ return bw_state->can_sagv;
+}
+
static u8 skl_compute_dbuf_slices(const struct intel_crtc_state *crtc_state,
u32 active_pipes);
@@ -4028,6 +4204,7 @@ skl_cursor_allocation(const struct intel_crtc_state *crtc_state,
u32 latency = dev_priv->wm.skl_latency[level];
skl_compute_plane_wm(crtc_state, level, latency, &wp, &wm, &wm);
+
if (wm.min_ddb_alloc == U16_MAX)
break;
@@ -4554,12 +4731,92 @@ skl_plane_wm_level(struct intel_plane *plane,
int level,
int color_plane)
{
+ struct drm_atomic_state *state = crtc_state->uapi.state;
+ struct drm_crtc *crtc = crtc_state->uapi.crtc;
+ struct drm_i915_private *dev_priv = to_i915(crtc->dev);
const struct skl_plane_wm *wm =
&crtc_state->wm.skl.optimal.planes[plane->id];
+ if (!level) {
+ bool can_sagv = false;
+
+ /*
+ * If we haven't yet swapped our state, we should use
+ * the state to determine SAGV, otherwise use global
+ * state as atomic state pointer might become stale
+ * and zeroed out.
+ */
+ if (state) {
+ struct intel_atomic_state *intel_state =
+ to_intel_atomic_state(state);
+ can_sagv = intel_can_enable_sagv_for_state(intel_state);
+ } else {
+ can_sagv = intel_can_enable_sagv(dev_priv);
+ }
+
+ if (can_sagv)
+ return color_plane ? &wm->uv_sagv_wm0 : &wm->sagv_wm0;
+ }
+
return color_plane ? &wm->uv_wm[level] : &wm->wm[level];
}
+static int
+tgl_check_pipe_fits_sagv_wm(struct intel_crtc_state *crtc_state)
+{
+ struct drm_crtc *crtc = crtc_state->uapi.crtc;
+ struct drm_i915_private *dev_priv = to_i915(crtc->dev);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct skl_ddb_entry *alloc = &crtc_state->wm.skl.ddb;
+ u16 alloc_size;
+ u64 total_data_rate;
+ enum plane_id plane_id;
+ int num_active;
+ u64 plane_data_rate[I915_MAX_PLANES] = {};
+ u32 blocks;
+
+ /*
+ * No need to check gen here, we call this only for gen12
+ */
+ total_data_rate =
+ icl_get_total_relative_data_rate(crtc_state,
+ plane_data_rate);
+
+ skl_ddb_get_pipe_allocation_limits(dev_priv, crtc_state,
+ total_data_rate,
+ alloc, &num_active);
+ alloc_size = skl_ddb_entry_size(alloc);
+ if (alloc_size == 0)
+ return -ENOSPC;
+
+ /*
+ * Do check if we can fit L0 + sagv_block_time and
+ * disable SAGV if we can't.
+ */
+ blocks = 0;
+ for_each_plane_id_on_crtc(intel_crtc, plane_id) {
+ /*
+ * The only place, where we can't use skl_plane_wm_level
+ * accessor, because if actually calls intel_can_enable_sagv
+ * which depends on that function.
+ */
+ const struct skl_plane_wm *wm =
+ &crtc_state->wm.skl.optimal.planes[plane_id];
+
+ blocks += wm->sagv_wm0.min_ddb_alloc;
+ blocks += wm->uv_sagv_wm0.min_ddb_alloc;
+
+ if (blocks > alloc_size) {
+ DRM_DEBUG_KMS("Not enough ddb blocks(%d<%d) for SAGV on pipe %c\n",
+ alloc_size, blocks, pipe_name(intel_crtc->pipe));
+ return -ENOSPC;
+ }
+ }
+ DRM_DEBUG_KMS("%d total blocks required for SAGV, ddb entry size %d\n",
+ blocks, alloc_size);
+ return 0;
+}
+
static int
skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state)
{
@@ -5143,11 +5400,19 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
static void
skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
const struct skl_wm_params *wm_params,
- struct skl_wm_level *levels)
+ struct skl_plane_wm *plane_wm,
+ bool yuv)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
int level, max_level = ilk_wm_max_level(dev_priv);
+ /*
+ * Check which kind of plane is it and based on that calculate
+ * correspondent WM levels.
+ */
+ struct skl_wm_level *levels = yuv ? plane_wm->uv_wm : plane_wm->wm;
struct skl_wm_level *result_prev = &levels[0];
+ struct skl_wm_level *sagv_wm = yuv ?
+ &plane_wm->uv_sagv_wm0 : &plane_wm->sagv_wm0;
for (level = 0; level <= max_level; level++) {
struct skl_wm_level *result = &levels[level];
@@ -5158,6 +5423,27 @@ skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
result_prev = result;
}
+ /*
+ * For Gen12 if it is an L0 we need to also
+ * consider sagv_block_time when calculating
+ * L0 watermark - we will need that when making
+ * a decision whether enable SAGV or not.
+ * For older gens we agreed to copy L0 value for
+ * compatibility.
+ */
+ if ((INTEL_GEN(dev_priv) >= 12)) {
+ u32 latency = dev_priv->wm.skl_latency[0];
+
+ latency += dev_priv->sagv_block_time_us;
+ skl_compute_plane_wm(crtc_state, 0, latency,
+ wm_params, &levels[0],
+ sagv_wm);
+ DRM_DEBUG_KMS("%d L0 blocks required for SAGV vs %d for non-SAGV\n",
+ sagv_wm->min_ddb_alloc, levels[0].min_ddb_alloc);
+ } else {
+ /* Since all members are POD */
+ *sagv_wm = levels[0];
+ }
}
static void skl_compute_transition_wm(const struct intel_crtc_state *crtc_state,
@@ -5232,7 +5518,7 @@ static int skl_build_plane_wm_single(struct intel_crtc_state *crtc_state,
if (ret)
return ret;
- skl_compute_wm_levels(crtc_state, &wm_params, wm->wm);
+ skl_compute_wm_levels(crtc_state, &wm_params, wm, false);
skl_compute_transition_wm(crtc_state, &wm_params, wm);
return 0;
@@ -5254,7 +5540,7 @@ static int skl_build_plane_wm_uv(struct intel_crtc_state *crtc_state,
if (ret)
return ret;
- skl_compute_wm_levels(crtc_state, &wm_params, wm->uv_wm);
+ skl_compute_wm_levels(crtc_state, &wm_params, wm, true);
return 0;
}
@@ -5585,9 +5871,24 @@ skl_print_wm_changes(struct intel_atomic_state *state)
for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
enum plane_id plane_id = plane->id;
const struct skl_plane_wm *old_wm, *new_wm;
+ const struct skl_wm_level *old_wm_level, *new_wm_level;
+ u16 old_plane_res_l, new_plane_res_l;
+ u8 old_plane_res_b, new_plane_res_b;
+ u16 old_min_ddb_alloc, new_min_ddb_alloc;
old_wm = &old_pipe_wm->planes[plane_id];
new_wm = &new_pipe_wm->planes[plane_id];
+ old_wm_level = skl_plane_wm_level(plane, old_crtc_state, 0, false);
+ new_wm_level = skl_plane_wm_level(plane, new_crtc_state, 0, false);
+
+ old_plane_res_l = old_wm_level->plane_res_l;
+ old_plane_res_b = old_wm_level->plane_res_b;
+
+ new_plane_res_l = new_wm_level->plane_res_l;
+ new_plane_res_b = new_wm_level->plane_res_b;
+
+ old_min_ddb_alloc = old_wm_level->min_ddb_alloc;
+ new_min_ddb_alloc = new_wm_level->min_ddb_alloc;
if (skl_plane_wm_equals(dev_priv, old_wm, new_wm))
continue;
@@ -5611,7 +5912,7 @@ skl_print_wm_changes(struct intel_atomic_state *state)
"[PLANE:%d:%s] lines %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d"
" -> %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d\n",
plane->base.base.id, plane->base.name,
- enast(old_wm->wm[0].ignore_lines), old_wm->wm[0].plane_res_l,
+ enast(old_wm->wm[0].ignore_lines), old_plane_res_l,
enast(old_wm->wm[1].ignore_lines), old_wm->wm[1].plane_res_l,
enast(old_wm->wm[2].ignore_lines), old_wm->wm[2].plane_res_l,
enast(old_wm->wm[3].ignore_lines), old_wm->wm[3].plane_res_l,
@@ -5621,7 +5922,7 @@ skl_print_wm_changes(struct intel_atomic_state *state)
enast(old_wm->wm[7].ignore_lines), old_wm->wm[7].plane_res_l,
enast(old_wm->trans_wm.ignore_lines), old_wm->trans_wm.plane_res_l,
- enast(new_wm->wm[0].ignore_lines), new_wm->wm[0].plane_res_l,
+ enast(new_wm->wm[0].ignore_lines), new_plane_res_l,
enast(new_wm->wm[1].ignore_lines), new_wm->wm[1].plane_res_l,
enast(new_wm->wm[2].ignore_lines), new_wm->wm[2].plane_res_l,
enast(new_wm->wm[3].ignore_lines), new_wm->wm[3].plane_res_l,
@@ -5635,12 +5936,12 @@ skl_print_wm_changes(struct intel_atomic_state *state)
"[PLANE:%d:%s] blocks %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
" -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
plane->base.base.id, plane->base.name,
- old_wm->wm[0].plane_res_b, old_wm->wm[1].plane_res_b,
+ old_plane_res_b, old_wm->wm[1].plane_res_b,
old_wm->wm[2].plane_res_b, old_wm->wm[3].plane_res_b,
old_wm->wm[4].plane_res_b, old_wm->wm[5].plane_res_b,
old_wm->wm[6].plane_res_b, old_wm->wm[7].plane_res_b,
old_wm->trans_wm.plane_res_b,
- new_wm->wm[0].plane_res_b, new_wm->wm[1].plane_res_b,
+ new_plane_res_b, new_wm->wm[1].plane_res_b,
new_wm->wm[2].plane_res_b, new_wm->wm[3].plane_res_b,
new_wm->wm[4].plane_res_b, new_wm->wm[5].plane_res_b,
new_wm->wm[6].plane_res_b, new_wm->wm[7].plane_res_b,
@@ -5650,12 +5951,12 @@ skl_print_wm_changes(struct intel_atomic_state *state)
"[PLANE:%d:%s] min_ddb %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
" -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
plane->base.base.id, plane->base.name,
- old_wm->wm[0].min_ddb_alloc, old_wm->wm[1].min_ddb_alloc,
+ old_min_ddb_alloc, old_wm->wm[1].min_ddb_alloc,
old_wm->wm[2].min_ddb_alloc, old_wm->wm[3].min_ddb_alloc,
old_wm->wm[4].min_ddb_alloc, old_wm->wm[5].min_ddb_alloc,
old_wm->wm[6].min_ddb_alloc, old_wm->wm[7].min_ddb_alloc,
old_wm->trans_wm.min_ddb_alloc,
- new_wm->wm[0].min_ddb_alloc, new_wm->wm[1].min_ddb_alloc,
+ new_min_ddb_alloc, new_wm->wm[1].min_ddb_alloc,
new_wm->wm[2].min_ddb_alloc, new_wm->wm[3].min_ddb_alloc,
new_wm->wm[4].min_ddb_alloc, new_wm->wm[5].min_ddb_alloc,
new_wm->wm[6].min_ddb_alloc, new_wm->wm[7].min_ddb_alloc,
@@ -5795,6 +6096,59 @@ static int skl_wm_add_affected_planes(struct intel_atomic_state *state,
return 0;
}
+static void tgl_compute_sagv_mask(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+ struct intel_crtc *crtc;
+ struct intel_crtc_state *new_crtc_state;
+ struct intel_crtc_state *old_crtc_state;
+ int ret;
+ int i;
+ struct intel_plane *plane;
+ struct intel_bw_state *new_bw_state = intel_bw_get_state(state);
+
+ if (IS_ERR(new_bw_state)) {
+ WARN(1, "Could not get bw_state\n");
+ return;
+ }
+
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+ new_crtc_state, i) {
+ int pipe_bit = BIT(crtc->pipe);
+ bool skip = true;
+
+ for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
+ enum plane_id plane_id = plane->id;
+ const struct skl_plane_wm *old_wm, *new_wm;
+ bool equal_wm;
+
+ old_wm = &old_crtc_state->wm.skl.optimal.planes[plane_id];
+ new_wm = &new_crtc_state->wm.skl.optimal.planes[plane_id];
+
+ equal_wm = skl_plane_wm_equals(dev_priv, old_wm, new_wm);
+
+ if (!equal_wm) {
+ skip = false;
+ break;
+ }
+ }
+
+ /*
+ * Check if wm levels are actually the same as for previous
+ * state, which means we can just skip doing this long check
+ * and just copy correspondent bit from previous state.
+ */
+ if (skip)
+ continue;
+
+ ret = tgl_check_pipe_fits_sagv_wm(new_crtc_state);
+ if (!ret)
+ new_bw_state->pipe_sagv_mask |= pipe_bit;
+ else
+ new_bw_state->pipe_sagv_mask &= ~pipe_bit;
+ }
+}
+
static int
skl_compute_wm(struct intel_atomic_state *state)
{
@@ -5823,6 +6177,13 @@ skl_compute_wm(struct intel_atomic_state *state)
return ret;
}
+ /*
+ * No active_pipe_changes and no wm/ddb changes means
+ * we can just skip recalculating SAGV mask.
+ */
+ if ((state->active_pipe_changes != 0) || state->ddb_state_changed)
+ intel_compute_sagv_mask(state);
+
ret = skl_compute_ddb(state);
if (ret)
return ret;
@@ -5942,6 +6303,9 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
val = I915_READ(CUR_WM(pipe, level));
skl_wm_level_from_reg_val(val, &wm->wm[level]);
+ if (level == 0)
+ memcpy(&wm->sagv_wm0, &wm->wm[level],
+ sizeof(struct skl_wm_level));
}
if (plane_id != PLANE_CURSOR)
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index d60a85421c5a..561a17a5d4e0 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -41,7 +41,9 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
struct skl_pipe_wm *out);
void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
-bool intel_can_enable_sagv(struct intel_atomic_state *state);
+bool intel_can_enable_sagv(struct drm_i915_private *dev_priv);
+bool intel_can_enable_sagv_for_state(struct intel_atomic_state *state);
+bool intel_has_sagv(struct drm_i915_private *dev_priv);
int intel_enable_sagv(struct drm_i915_private *dev_priv);
int intel_disable_sagv(struct drm_i915_private *dev_priv);
bool skl_wm_level_equals(const struct skl_wm_level *l1,
--
2.24.1.485.gad05a3d8e5
More information about the Intel-gfx
mailing list