[Intel-gfx] [PATCH v3 4/5] drm/i915: Don't use VBT for detecting DPCD backlight controls

Lyude Paul lyude at redhat.com
Thu Jan 16 21:16:11 UTC 2020


Despite the fact that the VBT appears to have a field for specifying
that a system is equipped with a panel that supports standard VESA
backlight controls over the DP AUX channel, so far every system we've
spotted DPCD backlight control support on doesn't actually set this
field correctly and all have it set to INTEL_BACKLIGHT_DISPLAY_DDI.

While we don't know the exact reason for this VBT misuse, talking with
some vendors indicated that there's a good number of laptop panels out
there that supposedly support both PWM backlight controls and DPCD
backlight controls as a workaround until Intel supports DPCD backlight
controls across platforms universally. This being said, the X1 Extreme
2nd Gen that I have here (note that Lenovo is not the hardware vendor
that informed us of this) PWM backlight controls are advertised, but
only DPCD controls actually function. I'm going to make an educated
guess here and say that on systems like this one, it's likely that PWM
backlight controls might have been intended to work but were never
really tested by QA.

Since we really need backlights to work without any extra module
parameters, let's take the risk here and rely on the standard DPCD caps
to tell us whether AUX backlight controls are supported or not. We still
check the VBT, but only to make sure that we don't enable DPCD backlight
controls on a panel that uses something other then the standard VESA
interfaces over AUX. Since panels using such non-standard interfaces
should probably have support added to i915, we'll print a warning when
seeing this in the VBT. We can remove this warning later if we end up
adding support for any custom backlight interfaces.

Signed-off-by: Lyude Paul <lyude at redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112376
Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Perry Yuan <pyuan at redhat.com>
Cc: AceLan Kao <acelan.kao at canonical.com>
---
 .../drm/i915/display/intel_dp_aux_backlight.c    | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index 77a759361c5c..3002b600635f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -330,13 +330,17 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 	struct intel_panel *panel = &intel_connector->panel;
 	struct drm_i915_private *dev_priv = to_i915(intel_connector->base.dev);
 
-	if (i915_modparams.enable_dpcd_backlight == 0 ||
-	    (i915_modparams.enable_dpcd_backlight == -1 &&
-	    dev_priv->vbt.backlight.type != INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE))
-		return -ENODEV;
-
-	if (!intel_dp_aux_display_control_capable(intel_connector))
+	if (i915_modparams.enable_dpcd_backlight == 0)
 		return -ENODEV;
+	if (i915_modparams.enable_dpcd_backlight == -1) {
+		if (dev_priv->vbt.backlight.type
+		    == INTEL_BACKLIGHT_PANEL_DRIVER_INTERFACE) {
+			DRM_WARN("VBT says panel uses custom panel driver interface, not using DPCD backlight controls\n");
+			return -ENODEV;
+		}
+		if (!intel_dp_aux_display_control_capable(intel_connector))
+			return -ENODEV;
+	}
 
 	panel->backlight.setup = intel_dp_aux_setup_backlight;
 	panel->backlight.enable = intel_dp_aux_enable_backlight;
-- 
2.24.1



More information about the Intel-gfx mailing list