[Intel-gfx] [PATCH v13 4/5] drm/i915: Manipulate DBuf slices properly
Matt Roper
matthew.d.roper at intel.com
Fri Jan 17 19:06:55 UTC 2020
On Fri, Jan 17, 2020 at 11:50:25AM +0200, Stanislav Lisovskiy wrote:
> Start manipulating DBuf slices as a mask,
> but not as a total number, as current approach
> doesn't give us full control on all combinations
> of slices, which we might need(like enabling S2
> only can't enabled by setting enabled_slices=1).
>
> Removed wrong code from intel_get_ddb_size as
> it doesn't match to BSpec. For now still just
> use DBuf slice until proper algorithm is implemented.
>
> Other minor code refactoring to get prepared
> for major DBuf assignment changes landed:
> - As now enabled slices contain a mask
> we still need some value which should
> reflect how much DBuf slices are supported
> by the platform, now device info contains
> num_supported_dbuf_slices.
> - Removed unneeded assertion as we are now
> manipulating slices in a more proper way.
>
> v2: Start using enabled_slices in dev_priv
>
> v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
> as this now sits in dev_priv independently.
>
> v4: - Fixed debug print formatting to hex(Matt Roper)
> - Optimized dbuf slice updates to be used only
> if slice union is different from current conf(Matt Roper)
> - Fixed some functions to be static(Matt Roper)
> - Created a parameterized version for DBUF_CTL to
> simplify DBuf programming cycle(Matt Roper)
> - Removed unrequred field from GEN10_FEATURES(Matt Roper)
>
> v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
> - Started to use parameterized loop for hw readout to get slices
> (Ville Syrjälä)
> - Added back assertion checking amount of DBUF slices enabled
> after DC states 5/6 transition, also added new assertion
> as starting from ICL DMC seems to restore the last DBuf
> power state set, rather than power up all dbuf slices
> as assertion was previously expecting(Ville Syrjälä)
>
> v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
> - Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
> back, as we really need to have a single unified assert here
> however currently enabling always slice 1 is enforced by BSpec,
> so we will have to OR enabled slices mask with 1 in order
> to be consistent with BSpec, that way we can unify that
> assertion and against the actual state from the driver, but
> not some hardcoded value.(concluded with Ville)
> - Remove parameterized DBUF_CTL version, to extract it to another
> patch.(Ville Syrjälä)
I think these next two items are new changes since the last version on
the list I reviewed, so they should probably be "v7" to make it easier
to see what changed.
> - Removed unneeded hardcoded return value for older gens from
> intel_enabled_dbuf_slices_mask - this now is handled in a
> unified manner since device info anyway returns max dbuf slices
> as 1 for older platforms(Matthew Roper)
> - Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
> of intel_dbuf_max_slices function as it is trivial(Matthew Roper)
>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 23 ++---
> .../drm/i915/display/intel_display_power.c | 92 ++++++-------------
> .../drm/i915/display/intel_display_types.h | 2 +-
> drivers/gpu/drm/i915/i915_drv.h | 2 +-
> drivers/gpu/drm/i915/i915_pci.c | 5 +-
> drivers/gpu/drm/i915/intel_device_info.h | 1 +
> drivers/gpu/drm/i915/intel_pm.c | 53 +++--------
> drivers/gpu/drm/i915/intel_pm.h | 2 +-
> 8 files changed, 63 insertions(+), 117 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 8b06ef29693e..061de161b95b 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13770,12 +13770,12 @@ static void verify_wm_state(struct intel_crtc *crtc,
>
> skl_pipe_ddb_get_hw_state(crtc, hw->ddb_y, hw->ddb_uv);
>
> - hw_enabled_slices = intel_enabled_dbuf_slices_num(dev_priv);
> + hw_enabled_slices = intel_enabled_dbuf_slices_mask(dev_priv);
>
> if (INTEL_GEN(dev_priv) >= 11 &&
> - hw_enabled_slices != dev_priv->enabled_dbuf_slices_num)
> - DRM_ERROR("mismatch in DBUF Slices (expected %u, got %u)\n",
> - dev_priv->enabled_dbuf_slices_num,
> + hw_enabled_slices != dev_priv->enabled_dbuf_slices_mask)
> + DRM_ERROR("mismatch in DBUF Slices (expected 0x%x, got 0x%x)\n",
> + dev_priv->enabled_dbuf_slices_mask,
> hw_enabled_slices);
>
> /* planes */
> @@ -15119,22 +15119,23 @@ static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
> static void icl_dbuf_slice_pre_update(struct intel_atomic_state *state)
> {
> struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> - u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_num;
> - u8 required_slices = state->enabled_dbuf_slices_num;
> + u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_mask;
> + u8 required_slices = state->enabled_dbuf_slices_mask;
> + u8 slices_union = hw_enabled_slices | required_slices;
>
> /* If 2nd DBuf slice required, enable it here */
> - if (INTEL_GEN(dev_priv) >= 11 && required_slices > hw_enabled_slices)
> - icl_dbuf_slices_update(dev_priv, required_slices);
> + if (INTEL_GEN(dev_priv) >= 11 && slices_union != hw_enabled_slices)
> + icl_dbuf_slices_update(dev_priv, slices_union);
> }
>
> static void icl_dbuf_slice_post_update(struct intel_atomic_state *state)
> {
> struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> - u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_num;
> - u8 required_slices = state->enabled_dbuf_slices_num;
> + u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_mask;
> + u8 required_slices = state->enabled_dbuf_slices_mask;
>
> /* If 2nd DBuf slice is no more required disable it */
> - if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
> + if (INTEL_GEN(dev_priv) >= 11 && required_slices != hw_enabled_slices)
> icl_dbuf_slices_update(dev_priv, required_slices);
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
> index 08065720391f..b86842b1ff7a 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> @@ -15,6 +15,7 @@
> #include "intel_display_types.h"
> #include "intel_dpio_phy.h"
> #include "intel_hotplug.h"
> +#include "intel_pm.h"
> #include "intel_sideband.h"
> #include "intel_tc.h"
> #include "intel_vga.h"
> @@ -1028,11 +1029,13 @@ static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
>
> static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
> {
> - u32 tmp = I915_READ(DBUF_CTL);
> + u8 hw_enabled_dbuf_slices = intel_enabled_dbuf_slices_mask(dev_priv);
> + u8 enabled_dbuf_slices = dev_priv->enabled_dbuf_slices_mask;
>
> - WARN((tmp & (DBUF_POWER_STATE | DBUF_POWER_REQUEST)) !=
> - (DBUF_POWER_STATE | DBUF_POWER_REQUEST),
> - "Unexpected DBuf power power state (0x%08x)\n", tmp);
> + WARN(hw_enabled_dbuf_slices != enabled_dbuf_slices,
> + "Unexpected DBuf power power state (0x%08x, expected 0x%08x)\n",
> + hw_enabled_dbuf_slices,
> + enabled_dbuf_slices);
> }
>
> static void gen9_disable_dc_states(struct drm_i915_private *dev_priv)
> @@ -4388,86 +4391,49 @@ bool intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
>
> static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> {
> - intel_dbuf_slice_set(dev_priv, DBUF_CTL, true);
> + icl_dbuf_slices_update(dev_priv, BIT(DBUF_S1));
> }
>
> static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
> {
> - intel_dbuf_slice_set(dev_priv, DBUF_CTL, false);
> -}
> -
> -static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv)
> -{
> - if (INTEL_GEN(dev_priv) < 11)
> - return 1;
> - return 2;
> + icl_dbuf_slices_update(dev_priv, 0);
> }
>
> void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
> u8 req_slices)
> {
> - const u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_num;
> - bool ret;
> + int i;
> + int max_slices = INTEL_INFO(dev_priv)->num_supported_dbuf_slices;
>
> - if (req_slices > intel_dbuf_max_slices(dev_priv)) {
> - DRM_ERROR("Invalid number of dbuf slices requested\n");
> - return;
> - }
> + WARN(hweight8(req_slices) > max_slices,
> + "Invalid number of dbuf slices requested\n");
>
> - if (req_slices == hw_enabled_slices || req_slices == 0)
> - return;
> + DRM_DEBUG_KMS("Updating dbuf slices to 0x%x\n", req_slices);
>
> - if (req_slices > hw_enabled_slices)
> - ret = intel_dbuf_slice_set(dev_priv,
> - DBUF_CTL_S(DBUF_S2), true);
> - else
> - ret = intel_dbuf_slice_set(dev_priv,
> - DBUF_CTL_S(DBUF_S2), false);
> + for (i = 0; i < max_slices; i++) {
> + intel_dbuf_slice_set(dev_priv,
> + DBUF_CTL_S(i),
> + (req_slices & BIT(i)) != 0);
> + }
>
> - if (ret)
> - dev_priv->enabled_dbuf_slices_num = req_slices;
> + dev_priv->enabled_dbuf_slices_mask = req_slices;
> }
>
> static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
> {
> - I915_WRITE(DBUF_CTL_S(DBUF_S1),
> - I915_READ(DBUF_CTL_S(DBUF_S1)) | DBUF_POWER_REQUEST);
> - I915_WRITE(DBUF_CTL_S(DBUF_S2),
> - I915_READ(DBUF_CTL_S(DBUF_S2)) | DBUF_POWER_REQUEST);
> - POSTING_READ(DBUF_CTL_S(DBUF_S2));
> -
> - udelay(10);
> -
> - if (!(I915_READ(DBUF_CTL_S(DBUF_S1)) & DBUF_POWER_STATE) ||
> - !(I915_READ(DBUF_CTL_S(DBUF_S2)) & DBUF_POWER_STATE))
> - DRM_ERROR("DBuf power enable timeout\n");
> - else
> - /*
> - * FIXME: for now pretend that we only have 1 slice, see
> - * intel_enabled_dbuf_slices_num().
> - */
> - dev_priv->enabled_dbuf_slices_num = 1;
> + /*
> + * Just power up 1 slice, we will
> + * figure out later which slices we have and what we need.
> + */
> + icl_dbuf_slices_update(dev_priv, BIT(DBUF_S1));
> }
>
> static void icl_dbuf_disable(struct drm_i915_private *dev_priv)
> {
> - I915_WRITE(DBUF_CTL_S(DBUF_S1),
> - I915_READ(DBUF_CTL_S(DBUF_S1)) & ~DBUF_POWER_REQUEST);
> - I915_WRITE(DBUF_CTL_S(DBUF_S2),
> - I915_READ(DBUF_CTL_S(DBUF_S2)) & ~DBUF_POWER_REQUEST);
> - POSTING_READ(DBUF_CTL_S(DBUF_S2));
> -
> - udelay(10);
> -
> - if ((I915_READ(DBUF_CTL_S(DBUF_S1)) & DBUF_POWER_STATE) ||
> - (I915_READ(DBUF_CTL_S(DBUF_S2)) & DBUF_POWER_STATE))
> - DRM_ERROR("DBuf power disable timeout!\n");
> - else
> - /*
> - * FIXME: for now pretend that the first slice is always
> - * enabled, see intel_enabled_dbuf_slices_num().
> - */
> - dev_priv->enabled_dbuf_slices_num = 1;
> + /*
> + * As of BSpec Slice 1 is always enabled.
> + */
> + icl_dbuf_slices_update(dev_priv, BIT(DBUF_S1));
> }
>
> static void icl_mbus_init(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 6dca90ebca35..09f14e9e7863 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -518,7 +518,7 @@ struct intel_atomic_state {
> struct skl_ddb_values wm_results;
>
> /* Number of enabled DBuf slices */
> - u8 enabled_dbuf_slices_num;
> + u8 enabled_dbuf_slices_mask;
>
> struct i915_sw_fence commit_ready;
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 9dbf2e57b01b..5b895ad38fbc 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1208,7 +1208,7 @@ struct drm_i915_private {
> bool distrust_bios_wm;
> } wm;
>
> - u8 enabled_dbuf_slices_num; /* GEN11 has configurable 2 slices */
> + u8 enabled_dbuf_slices_mask; /* GEN11 has configurable 2 slices */
>
> struct dram_info {
> bool valid;
> diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
> index 83f01401b8b5..6c6daa44c439 100644
> --- a/drivers/gpu/drm/i915/i915_pci.c
> +++ b/drivers/gpu/drm/i915/i915_pci.c
> @@ -615,7 +615,8 @@ static const struct intel_device_info chv_info = {
> .has_gt_uc = 1, \
> .display.has_hdcp = 1, \
> .display.has_ipc = 1, \
> - .ddb_size = 896
> + .ddb_size = 896, \
> + .num_supported_dbuf_slices = 1
>
> #define SKL_PLATFORM \
> GEN9_FEATURES, \
> @@ -650,6 +651,7 @@ static const struct intel_device_info skl_gt4_info = {
> #define GEN9_LP_FEATURES \
> GEN(9), \
> .is_lp = 1, \
> + .num_supported_dbuf_slices = 1, \
> .display.has_hotplug = 1, \
> .engine_mask = BIT(RCS0) | BIT(VCS0) | BIT(BCS0) | BIT(VECS0), \
> .pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), \
> @@ -774,6 +776,7 @@ static const struct intel_device_info cnl_info = {
> }, \
> GEN(11), \
> .ddb_size = 2048, \
> + .num_supported_dbuf_slices = 2, \
Not sure if you saw my comment on the previous revision, but I suggested
that you might want to "flip the switch" on icl+ actually using the
second dbuf as a separate patch at the very end of the series. Up to
you though; it's fine if you disagree.
Otherwise, with the uninit fix that Ville caught,
Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
> .has_logical_ring_elsq = 1, \
> .color = { .degamma_lut_size = 33, .gamma_lut_size = 262145 }
>
> diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
> index 2725cb7fc169..7d4d122d2182 100644
> --- a/drivers/gpu/drm/i915/intel_device_info.h
> +++ b/drivers/gpu/drm/i915/intel_device_info.h
> @@ -180,6 +180,7 @@ struct intel_device_info {
> } display;
>
> u16 ddb_size; /* in blocks */
> + u8 num_supported_dbuf_slices; /* number of DBuf slices */
>
> /* Register offsets for the various display pipes and transcoders */
> int pipe_offsets[I915_MAX_TRANSCODERS];
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index f22509f8ac28..b4b291d4244b 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3644,26 +3644,18 @@ bool ilk_disable_lp_wm(struct drm_i915_private *dev_priv)
> return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
> }
>
> -u8 intel_enabled_dbuf_slices_num(struct drm_i915_private *dev_priv)
> +u8 intel_enabled_dbuf_slices_mask(struct drm_i915_private *dev_priv)
> {
> - u8 enabled_dbuf_slices_num;
> -
> - /* Slice 1 will always be enabled */
> - enabled_dbuf_slices_num = 1;
> -
> - /* Gen prior to GEN11 have only one DBuf slice */
> - if (INTEL_GEN(dev_priv) < 11)
> - return enabled_dbuf_slices_num;
> + int i;
> + int max_slices = INTEL_INFO(dev_priv)->num_supported_dbuf_slices;
> + u8 enabled_slices_mask = 0;
>
> - /*
> - * FIXME: for now we'll only ever use 1 slice; pretend that we have
> - * only that 1 slice enabled until we have a proper way for on-demand
> - * toggling of the second slice.
> - */
> - if (0 && I915_READ(DBUF_CTL_S(DBUF_S2)) & DBUF_POWER_STATE)
> - enabled_dbuf_slices_num++;
> + for (i = 0; i < max_slices; i++) {
> + if (I915_READ(DBUF_CTL_S(i)) & DBUF_POWER_STATE)
> + enabled_slices_mask |= BIT(i);
> + }
>
> - return enabled_dbuf_slices_num;
> + return enabled_slices_mask;
> }
>
> /*
> @@ -3871,8 +3863,6 @@ static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv,
> {
> struct drm_atomic_state *state = crtc_state->uapi.state;
> struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
> - const struct drm_display_mode *adjusted_mode;
> - u64 total_data_bw;
> u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
>
> WARN_ON(ddb_size == 0);
> @@ -3880,23 +3870,8 @@ static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv,
> if (INTEL_GEN(dev_priv) < 11)
> return ddb_size - 4; /* 4 blocks for bypass path allocation */
>
> - adjusted_mode = &crtc_state->hw.adjusted_mode;
> - total_data_bw = total_data_rate * drm_mode_vrefresh(adjusted_mode);
> -
> - /*
> - * 12GB/s is maximum BW supported by single DBuf slice.
> - *
> - * FIXME dbuf slice code is broken:
> - * - must wait for planes to stop using the slice before powering it off
> - * - plane straddling both slices is illegal in multi-pipe scenarios
> - * - should validate we stay within the hw bandwidth limits
> - */
> - if (0 && (num_active > 1 || total_data_bw >= GBps(12))) {
> - intel_state->enabled_dbuf_slices_num = 2;
> - } else {
> - intel_state->enabled_dbuf_slices_num = 1;
> - ddb_size /= 2;
> - }
> + intel_state->enabled_dbuf_slices_mask = BIT(DBUF_S1);
> + ddb_size /= 2;
>
> return ddb_size;
> }
> @@ -4093,8 +4068,8 @@ void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
>
> void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv)
> {
> - dev_priv->enabled_dbuf_slices_num =
> - intel_enabled_dbuf_slices_num(dev_priv);
> + dev_priv->enabled_dbuf_slices_mask =
> + intel_enabled_dbuf_slices_mask(dev_priv);
> }
>
> /*
> @@ -5236,7 +5211,7 @@ skl_compute_ddb(struct intel_atomic_state *state)
> struct intel_crtc *crtc;
> int ret, i;
>
> - state->enabled_dbuf_slices_num = dev_priv->enabled_dbuf_slices_num;
> + state->enabled_dbuf_slices_mask = dev_priv->enabled_dbuf_slices_mask;
>
> for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> new_crtc_state, i) {
> diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
> index 22fd2daf608e..d60a85421c5a 100644
> --- a/drivers/gpu/drm/i915/intel_pm.h
> +++ b/drivers/gpu/drm/i915/intel_pm.h
> @@ -32,7 +32,7 @@ void g4x_wm_get_hw_state(struct drm_i915_private *dev_priv);
> void vlv_wm_get_hw_state(struct drm_i915_private *dev_priv);
> void ilk_wm_get_hw_state(struct drm_i915_private *dev_priv);
> void skl_wm_get_hw_state(struct drm_i915_private *dev_priv);
> -u8 intel_enabled_dbuf_slices_num(struct drm_i915_private *dev_priv);
> +u8 intel_enabled_dbuf_slices_mask(struct drm_i915_private *dev_priv);
> void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
> struct skl_ddb_entry *ddb_y,
> struct skl_ddb_entry *ddb_uv);
> --
> 2.24.1.485.gad05a3d8e5
>
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
More information about the Intel-gfx
mailing list