[Intel-gfx] [PATCH v5 08/21] drm/i915/display/dp: Make WARN* drm specific where drm_device ptr is available
Pankaj Bharadiya
pankaj.laxminarayan.bharadiya at intel.com
Tue Jan 28 18:15:50 UTC 2020
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device or drm_i915_private struct
pointer is readily available.
The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.
@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_device *T = ...;
<...
(
-WARN(
+drm_WARN(T,
...)
|
-WARN_ON(
+drm_WARN_ON(T,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(T,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(T,
...)
)
...>
}
@rule2@
identifier func, T;
@@
func(struct drm_device *T,...) {
<...
(
-WARN(
+drm_WARN(T,
...)
|
-WARN_ON(
+drm_WARN_ON(T,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(T,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(T,
...)
)
...>
}
@rule3@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}
@rule4@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya at intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 117 +++++++++++++-----------
1 file changed, 66 insertions(+), 51 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index e21bc339cb29..4770c1967de4 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -324,7 +324,8 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
int size, max_rate = 0, vbt_max_rate;
/* This should only be done once */
- WARN_ON(intel_dp->source_rates || intel_dp->num_source_rates);
+ drm_WARN_ON(&dev_priv->drm,
+ intel_dp->source_rates || intel_dp->num_source_rates);
if (INTEL_GEN(dev_priv) >= 10) {
source_rates = cnl_rates;
@@ -756,10 +757,11 @@ vlv_power_sequencer_kick(struct intel_dp *intel_dp)
enum dpio_channel ch = vlv_pipe_to_channel(pipe);
u32 DP;
- if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN,
- "skipping pipe %c power sequencer kick due to [ENCODER:%d:%s] being active\n",
- pipe_name(pipe), intel_dig_port->base.base.base.id,
- intel_dig_port->base.base.name))
+ if (drm_WARN(&dev_priv->drm,
+ I915_READ(intel_dp->output_reg) & DP_PORT_EN,
+ "skipping pipe %c power sequencer kick due to [ENCODER:%d:%s] being active\n",
+ pipe_name(pipe), intel_dig_port->base.base.base.id,
+ intel_dig_port->base.base.name))
return;
drm_dbg_kms(&dev_priv->drm,
@@ -835,13 +837,16 @@ static enum pipe vlv_find_free_pps(struct drm_i915_private *dev_priv)
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
if (encoder->type == INTEL_OUTPUT_EDP) {
- WARN_ON(intel_dp->active_pipe != INVALID_PIPE &&
- intel_dp->active_pipe != intel_dp->pps_pipe);
+ drm_WARN_ON(&dev_priv->drm,
+ intel_dp->active_pipe != INVALID_PIPE &&
+ intel_dp->active_pipe !=
+ intel_dp->pps_pipe);
if (intel_dp->pps_pipe != INVALID_PIPE)
pipes &= ~(1 << intel_dp->pps_pipe);
} else {
- WARN_ON(intel_dp->pps_pipe != INVALID_PIPE);
+ drm_WARN_ON(&dev_priv->drm,
+ intel_dp->pps_pipe != INVALID_PIPE);
if (intel_dp->active_pipe != INVALID_PIPE)
pipes &= ~(1 << intel_dp->active_pipe);
@@ -864,10 +869,10 @@ vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
lockdep_assert_held(&dev_priv->pps_mutex);
/* We should never land here with regular DP ports */
- WARN_ON(!intel_dp_is_edp(intel_dp));
+ drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp));
- WARN_ON(intel_dp->active_pipe != INVALID_PIPE &&
- intel_dp->active_pipe != intel_dp->pps_pipe);
+ drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE &&
+ intel_dp->active_pipe != intel_dp->pps_pipe);
if (intel_dp->pps_pipe != INVALID_PIPE)
return intel_dp->pps_pipe;
@@ -878,7 +883,7 @@ vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
* Didn't find one. This should not happen since there
* are two power sequencers and up to two eDP ports.
*/
- if (WARN_ON(pipe == INVALID_PIPE))
+ if (drm_WARN_ON(&dev_priv->drm, pipe == INVALID_PIPE))
pipe = PIPE_A;
vlv_steal_power_sequencer(dev_priv, pipe);
@@ -912,7 +917,7 @@ bxt_power_sequencer_idx(struct intel_dp *intel_dp)
lockdep_assert_held(&dev_priv->pps_mutex);
/* We should never land here with regular DP ports */
- WARN_ON(!intel_dp_is_edp(intel_dp));
+ drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp));
if (!intel_dp->pps_reset)
return backlight_controller;
@@ -1017,8 +1022,9 @@ void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
{
struct intel_encoder *encoder;
- if (WARN_ON(!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
- !IS_GEN9_LP(dev_priv)))
+ if (drm_WARN_ON(&dev_priv->drm, !IS_VALLEYVIEW(dev_priv) &&
+ !IS_CHERRYVIEW(dev_priv) &&
+ !IS_GEN9_LP(dev_priv)))
return;
/*
@@ -1034,7 +1040,8 @@ void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
for_each_intel_dp(&dev_priv->drm, encoder) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- WARN_ON(intel_dp->active_pipe != INVALID_PIPE);
+ drm_WARN_ON(&dev_priv->drm,
+ intel_dp->active_pipe != INVALID_PIPE);
if (encoder->type != INTEL_OUTPUT_EDP)
continue;
@@ -1168,7 +1175,8 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
return;
if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) {
- WARN(1, "eDP powered off while attempting aux channel communication.\n");
+ drm_WARN(&dev_priv->drm, 1,
+ "eDP powered off while attempting aux channel communication.\n");
drm_dbg_kms(&dev_priv->drm, "Status 0x%08x Control 0x%08x\n",
I915_READ(_pp_stat_reg(intel_dp)),
I915_READ(_pp_ctrl_reg(intel_dp)));
@@ -1380,8 +1388,9 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
const u32 status = intel_uncore_read(uncore, ch_ctl);
if (status != intel_dp->aux_busy_last_status) {
- WARN(1, "%s: not started (status 0x%08x)\n",
- intel_dp->aux.name, status);
+ drm_WARN(&i915->drm, 1,
+ "%s: not started (status 0x%08x)\n",
+ intel_dp->aux.name, status);
intel_dp->aux_busy_last_status = status;
}
@@ -1390,7 +1399,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
}
/* Only 5 data registers! */
- if (WARN_ON(send_bytes > 20 || recv_size > 20)) {
+ if (drm_WARN_ON(&i915->drm, send_bytes > 20 || recv_size > 20)) {
ret = -E2BIG;
goto out;
}
@@ -2675,8 +2684,8 @@ static u32 ilk_get_pp_control(struct intel_dp *intel_dp)
lockdep_assert_held(&dev_priv->pps_mutex);
control = I915_READ(_pp_ctrl_reg(intel_dp));
- if (WARN_ON(!HAS_DDI(dev_priv) &&
- (control & PANEL_UNLOCK_MASK) != PANEL_UNLOCK_REGS)) {
+ if (drm_WARN_ON(&dev_priv->drm, !HAS_DDI(dev_priv) &&
+ (control & PANEL_UNLOCK_MASK) != PANEL_UNLOCK_REGS)) {
control &= ~PANEL_UNLOCK_MASK;
control |= PANEL_UNLOCK_REGS;
}
@@ -2774,7 +2783,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
lockdep_assert_held(&dev_priv->pps_mutex);
- WARN_ON(intel_dp->want_panel_vdd);
+ drm_WARN_ON(&dev_priv->drm, intel_dp->want_panel_vdd);
if (!edp_have_panel_vdd(intel_dp))
return;
@@ -2870,10 +2879,10 @@ static void edp_panel_on(struct intel_dp *intel_dp)
dp_to_dig_port(intel_dp)->base.base.base.id,
dp_to_dig_port(intel_dp)->base.base.name);
- if (WARN(edp_have_panel_power(intel_dp),
- "[ENCODER:%d:%s] panel power already on\n",
- dp_to_dig_port(intel_dp)->base.base.base.id,
- dp_to_dig_port(intel_dp)->base.base.name))
+ if (drm_WARN(&dev_priv->drm, edp_have_panel_power(intel_dp),
+ "[ENCODER:%d:%s] panel power already on\n",
+ dp_to_dig_port(intel_dp)->base.base.base.id,
+ dp_to_dig_port(intel_dp)->base.base.name))
return;
wait_panel_power_cycle(intel_dp);
@@ -2931,8 +2940,9 @@ static void edp_panel_off(struct intel_dp *intel_dp)
drm_dbg_kms(&dev_priv->drm, "Turn [ENCODER:%d:%s] panel power off\n",
dig_port->base.base.base.id, dig_port->base.base.name);
- WARN(!intel_dp->want_panel_vdd, "Need [ENCODER:%d:%s] VDD to turn off panel\n",
- dig_port->base.base.base.id, dig_port->base.base.name);
+ drm_WARN(&dev_priv->drm, !intel_dp->want_panel_vdd,
+ "Need [ENCODER:%d:%s] VDD to turn off panel\n",
+ dig_port->base.base.base.id, dig_port->base.base.name);
pp = ilk_get_pp_control(intel_dp);
/* We need to switch off panel power _and_ force vdd, for otherwise some
@@ -3574,7 +3584,7 @@ static void intel_enable_dp(struct intel_encoder *encoder,
enum pipe pipe = crtc->pipe;
intel_wakeref_t wakeref;
- if (WARN_ON(dp_reg & DP_PORT_EN))
+ if (drm_WARN_ON(&dev_priv->drm, dp_reg & DP_PORT_EN))
return;
with_pps_lock(intel_dp, wakeref) {
@@ -3645,9 +3655,9 @@ static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
enum pipe pipe = intel_dp->pps_pipe;
i915_reg_t pp_on_reg = PP_ON_DELAYS(pipe);
- WARN_ON(intel_dp->active_pipe != INVALID_PIPE);
+ drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE);
- if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
+ if (drm_WARN_ON(&dev_priv->drm, pipe != PIPE_A && pipe != PIPE_B))
return;
edp_panel_vdd_off_sync(intel_dp);
@@ -3681,10 +3691,10 @@ static void vlv_steal_power_sequencer(struct drm_i915_private *dev_priv,
for_each_intel_dp(&dev_priv->drm, encoder) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- WARN(intel_dp->active_pipe == pipe,
- "stealing pipe %c power sequencer from active [ENCODER:%d:%s]\n",
- pipe_name(pipe), encoder->base.base.id,
- encoder->base.name);
+ drm_WARN(&dev_priv->drm, intel_dp->active_pipe == pipe,
+ "stealing pipe %c power sequencer from active [ENCODER:%d:%s]\n",
+ pipe_name(pipe), encoder->base.base.id,
+ encoder->base.name);
if (intel_dp->pps_pipe != pipe)
continue;
@@ -3708,7 +3718,7 @@ static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
lockdep_assert_held(&dev_priv->pps_mutex);
- WARN_ON(intel_dp->active_pipe != INVALID_PIPE);
+ drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE);
if (intel_dp->pps_pipe != INVALID_PIPE &&
intel_dp->pps_pipe != crtc->pipe) {
@@ -4236,7 +4246,8 @@ intel_dp_link_down(struct intel_encoder *encoder,
enum port port = encoder->port;
u32 DP = intel_dp->DP;
- if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
+ if (drm_WARN_ON(&dev_priv->drm,
+ (I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
return;
drm_dbg_kms(&dev_priv->drm, "\n");
@@ -4398,7 +4409,7 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
/* this function is meant to be called only once */
- WARN_ON(intel_dp->dpcd[DP_DPCD_REV] != 0);
+ drm_WARN_ON(&dev_priv->drm, intel_dp->dpcd[DP_DPCD_REV] != 0);
if (!intel_dp_read_dpcd(intel_dp))
return false;
@@ -5154,7 +5165,7 @@ int intel_dp_retrain_link(struct intel_encoder *encoder,
crtc_state = to_intel_crtc_state(crtc->base.state);
- WARN_ON(!intel_crtc_has_dp_encoder(crtc_state));
+ drm_WARN_ON(&dev_priv->drm, !intel_crtc_has_dp_encoder(crtc_state));
if (!crtc_state->hw.active)
return 0;
@@ -5689,7 +5700,8 @@ intel_dp_detect(struct drm_connector *connector,
drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n",
connector->base.id, connector->name);
- WARN_ON(!drm_modeset_is_locked(&dev_priv->drm.mode_config.connection_mutex));
+ drm_WARN_ON(&dev_priv->drm,
+ !drm_modeset_is_locked(&dev_priv->drm.mode_config.connection_mutex));
/* Can't disconnect eDP */
if (intel_dp_is_edp(intel_dp))
@@ -6902,7 +6914,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
if (force_disable_vdd) {
u32 pp = ilk_get_pp_control(intel_dp);
- WARN(pp & PANEL_POWER_ON, "Panel power already on\n");
+ drm_WARN(&dev_priv->drm, pp & PANEL_POWER_ON,
+ "Panel power already on\n");
if (pp & EDP_FORCE_VDD)
drm_dbg_kms(&dev_priv->drm,
@@ -7379,7 +7392,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
* with an already powered-on LVDS power sequencer.
*/
if (intel_get_lvds_encoder(dev_priv)) {
- WARN_ON(!(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)));
+ drm_WARN_ON(dev,
+ !(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)));
drm_info(&dev_priv->drm,
"LVDS was detected, not registering eDP\n");
@@ -7513,10 +7527,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
INIT_WORK(&intel_connector->modeset_retry_work,
intel_dp_modeset_retry_work_fn);
- if (WARN(intel_dig_port->max_lanes < 1,
- "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n",
- intel_dig_port->max_lanes, intel_encoder->base.base.id,
- intel_encoder->base.name))
+ if (drm_WARN(dev, intel_dig_port->max_lanes < 1,
+ "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n",
+ intel_dig_port->max_lanes, intel_encoder->base.base.id,
+ intel_encoder->base.name))
return false;
intel_dp_set_source_rates(intel_dp);
@@ -7534,7 +7548,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
* Currently we don't support eDP on TypeC ports, although in
* theory it could work on TypeC legacy ports.
*/
- WARN_ON(intel_phy_is_tc(dev_priv, phy));
+ drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy));
type = DRM_MODE_CONNECTOR_eDP;
} else {
type = DRM_MODE_CONNECTOR_DisplayPort;
@@ -7552,9 +7566,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
intel_encoder->type = INTEL_OUTPUT_EDP;
/* eDP only on port B and/or C on vlv/chv */
- if (WARN_ON((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
- intel_dp_is_edp(intel_dp) &&
- port != PORT_B && port != PORT_C))
+ if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
+ IS_CHERRYVIEW(dev_priv)) &&
+ intel_dp_is_edp(intel_dp) &&
+ port != PORT_B && port != PORT_C))
return false;
drm_dbg_kms(&dev_priv->drm,
--
2.23.0
More information about the Intel-gfx
mailing list