[Intel-gfx] [PATCH v2 00/59] Add support for KeemBay DRM driver

[Sam Ravnborg]

Hi Anitha.

On Tue, Jul 14, 2020 at 01:56:46PM -0700, Anitha Chrisanthus wrote:
> This is a new DRM driver for Intel's KeemBay SOC.
> The SoC couples an ARM Cortex A53 CPU with an Intel
> Movidius VPU.
> 
> This driver is tested with the KMB EVM board which is the refernce baord
> for Keem Bay SOC. The SOC's display pipeline is as follows
> 
> +--------------+    +---------+    +-----------------------+
> |LCD controller| -> |Mipi DSI | -> |Mipi to HDMI Converter |
> +--------------+    +---------+    +-----------------------+
> 
> LCD controller and Mipi DSI transmitter are part of the SOC and
> mipi to HDMI converter is ADV7535 for KMB EVM board.
> 
> The DRM driver is a basic KMS atomic modesetting display driver and
> has no 2D or 3D graphics.It calls into the ADV bridge driver at
> the connector level.
> 
> Only 1080p resolution and single plane is supported at this time.
> The usecase is for debugging video and camera outputs.
> 
> Device tree patches are under review here
> https://lore.kernel.org/linux-arm-kernel/20200708175020.194436-1-daniele.alessandrelli@linux.intel.com/T/
> 
> Changes since v1:
> - Removed redundant license text, updated license
> - Rearranged include blocks
> - renamed global vars and removed extern in c
> - Used upclassing for dev_private
> - Used drm_dev_init in drm device create (will be updated to use
>   devm_drm_dev_alloc() in a separate patch later as kmb driver is currently
>   developed on 5.4 kernel)
> - minor cleanups

Could you please include a TODO or something.
It is not obvious if some points from last review are pending
or they were skipped. From a quick look maybe half of the poitns were
addressed which is good. But some points are yet to be done.

	Sam


> 
> Anitha Chrisanthus (52):
>   drm/kmb: Add support for KeemBay Display
>   drm/kmb: Added id to kmb_plane
>   drm/kmb: Set correct values in the LAYERn_CFG register
>   drm/kmb: Use biwise operators for register definitions
>   drm/kmb: Updated kmb_plane_atomic_check
>   drm/kmb: Initial check-in for Mipi DSI
>   drm/kmb: Set OUT_FORMAT_CFG register
>   drm/kmb: Added mipi_dsi_host initialization
>   drm/kmb: Part 1 of Mipi Tx Initialization
>   drm/kmb: Part 2 of Mipi Tx Initialization
>   drm/kmb: Use correct mmio offset from data book
>   drm/kmb: Part3 of Mipi Tx initialization
>   drm/kmb: Part4 of Mipi Tx Initialization
>   drm/kmb: Correct address offsets for mipi registers
>   drm/kmb: Part5 of Mipi Tx Intitialization
>   drm/kmb: Part6 of Mipi Tx Initialization
>   drm/kmb: Part7 of Mipi Tx Initialization
>   drm/kmb: Part8 of Mipi Tx Initialization
>   drm/kmb: Added ioremap/iounmap for register access
>   drm/kmb: Register IRQ for LCD
>   drm/kmb: IRQ handlers for LCD and mipi dsi
>   drm/kmb: Set hardcoded values to LCD_VSYNC_START
>   drm/kmb: Additional register programming to update_plane
>   drm/kmb: Add ADV7535 bridge
>   drm/kmb: Display clock enable/disable
>   drm/kmb: rebase to newer kernel version
>   drm/kmb: minor name change to match device tree
>   drm/kmb: Changed MMIO size
>   drm/kmb: Defer Probe
>   drm/kmb: call bridge init in the very beginning
>   drm/kmb: Enable MSS_CAM_CLK_CTRL for LCD and MIPI
>   drm/kmb: Set MSS_CAM_RSTN_CTRL along with enable
>   drm/kmb: Mipi DPHY initialization changes
>   drm/kmb: Fixed driver unload
>   drm/kmb: Added LCD_TEST config
>   drm/kmb: Changes for LCD to Mipi
>   drm/kmb: Update LCD programming to match MIPI
>   drm/kmb: Changed name of driver to kmb-drm
>   drm/kmb: Mipi settings from input timings
>   drm/kmb: Enable LCD interrupts
>   drm/kmb: Enable LCD interrupts during modeset
>   drm/kmb: Don’t inadvertantly disable LCD controller
>   drm/kmb: SWAP R and B LCD Layer order
>   drm/kmb: Disable ping pong mode
>   drm/kmb: Do the layer initializations only once
>   drm/kmb: disable the LCD layer in EOF irq handler
>   drm/kmb: Initialize uninitialized variables
>   drm/kmb: Added useful messages in LCD ISR
>   kmb/drm: Prune unsupported modes
>   drm/kmb: workaround for dma undeflow issue
>   drm/kmb: Get System Clock from SCMI
>   drm/kmb: work around for planar formats
> 
> Edmund Dea (7):
>   drm/kmb: Cleanup probe functions
>   drm/kmb: Revert dsi_host back to a static variable
>   drm/kmb: Initialize clocks for clk_msscam, clk_mipi_ecfg, &
>     clk_mipi_cfg.
>   drm/kmb: Remove declaration of irq_lcd/irq_mipi
>   drm/kmb: Enable MIPI TX HS Test Pattern Generation
>   drm/kmb: Write to LCD_LAYERn_CFG only once
>   drm/kmb: Cleaned up code
> 
>  drivers/gpu/drm/Kconfig         |    2 +
>  drivers/gpu/drm/Makefile        |    1 +
>  drivers/gpu/drm/kmb/Kconfig     |   12 +
>  drivers/gpu/drm/kmb/Makefile    |    2 +
>  drivers/gpu/drm/kmb/kmb_crtc.c  |  226 +++++
>  drivers/gpu/drm/kmb/kmb_crtc.h  |   41 +
>  drivers/gpu/drm/kmb/kmb_drv.c   |  809 ++++++++++++++++
>  drivers/gpu/drm/kmb/kmb_drv.h   |  176 ++++
>  drivers/gpu/drm/kmb/kmb_dsi.c   | 1927 +++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/kmb/kmb_dsi.h   |  370 ++++++++
>  drivers/gpu/drm/kmb/kmb_plane.c |  518 +++++++++++
>  drivers/gpu/drm/kmb/kmb_plane.h |  124 +++
>  drivers/gpu/drm/kmb/kmb_regs.h  |  738 +++++++++++++++
>  13 files changed, 4946 insertions(+)
>  create mode 100644 drivers/gpu/drm/kmb/Kconfig
>  create mode 100644 drivers/gpu/drm/kmb/Makefile
>  create mode 100644 drivers/gpu/drm/kmb/kmb_crtc.c
>  create mode 100644 drivers/gpu/drm/kmb/kmb_crtc.h
>  create mode 100644 drivers/gpu/drm/kmb/kmb_drv.c
>  create mode 100644 drivers/gpu/drm/kmb/kmb_drv.h
>  create mode 100644 drivers/gpu/drm/kmb/kmb_dsi.c
>  create mode 100644 drivers/gpu/drm/kmb/kmb_dsi.h
>  create mode 100644 drivers/gpu/drm/kmb/kmb_plane.c
>  create mode 100644 drivers/gpu/drm/kmb/kmb_plane.h
>  create mode 100644 drivers/gpu/drm/kmb/kmb_regs.h
> 
> -- 
> 2.7.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel