[Intel-gfx] [PATCH] Revert "Revert "drm/i915/dp: Correctly advertise HBR3 for GEN11+""

[Matt Atwood]

On Wed, Jul 15, 2020 at 11:27:15PM +0300, Imre Deak wrote:
> On Wed, Jul 15, 2020 at 12:15:35PM -0700, Manasi Navare wrote:
> > On Wed, Jul 15, 2020 at 07:29:31PM +0300, Imre Deak wrote:
> > > The problem the reverted patch revealed could've been fixed by commit
> > > 619ad4874585 ("drm/i915/ddi: Don't frob the DP link scramble disabling flag")
> > > in particular because the revealed problem (at least in one case) happened
> > > when switching to the TPS4 training pattern, which needs scrambling.
> > > 
> > > Let's try applying the HBR3 fix again.
> 
> The link training failure still happens the same way on fi-icl-u2.
Previously this only failed on a specific TGL CI system, did you get
failures on both this go around? ICL passed last time.
> 
> > > 
> > > This reverts commit d3913019602e32ef6fbba8eb0167e83250cdab22.
> > > 
> > > Cc: Matt Atwood <matthew.s.atwood at intel.com>
> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Cc: Manasi Navare <manasi.d.navare at intel.com>
> > > Cc: José Roberto de Souza <jose.souza at intel.com>
> > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > 
> > Makes sense since the problem occured only in CI, not on
> > the local testing done by Matt on his eDP panel.
> > 
> > Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>
> > 
> > Manasi
> > 
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_dp.c | 28 ++++++++++---------------
> > >  1 file changed, 11 insertions(+), 17 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > > index d6295eb20b63..a5ab405d3a12 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > @@ -137,6 +137,8 @@ static const u8 valid_dsc_slicecount[] = {1, 2, 4};
> > >   *
> > >   * If a CPU or PCH DP output is attached to an eDP panel, this function
> > >   * will return true, and false otherwise.
> > > + *
> > > + * This function is not safe to use prior to encoder type being set.
> > >   */
> > >  bool intel_dp_is_edp(struct intel_dp *intel_dp)
> > >  {
> > > @@ -8157,8 +8159,6 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
> > >  		     intel_encoder->base.name))
> > >  		return false;
> > >  
> > > -	intel_dp_set_source_rates(intel_dp);
> > > -
> > >  	intel_dp->reset_link_params = true;
> > >  	intel_dp->pps_pipe = INVALID_PIPE;
> > >  	intel_dp->active_pipe = INVALID_PIPE;
> > > @@ -8174,28 +8174,22 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
> > >  		 */
> > >  		drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy));
> > >  		type = DRM_MODE_CONNECTOR_eDP;
> > > +		intel_encoder->type = INTEL_OUTPUT_EDP;
> > > +
> > > +		/* eDP only on port B and/or C on vlv/chv */
> > > +		if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
> > > +				      IS_CHERRYVIEW(dev_priv)) &&
> > > +				port != PORT_B && port != PORT_C))
> > > +			return false;
> > >  	} else {
> > >  		type = DRM_MODE_CONNECTOR_DisplayPort;
> > >  	}
> > >  
> > > +	intel_dp_set_source_rates(intel_dp);
> > > +
> > >  	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > >  		intel_dp->active_pipe = vlv_active_pipe(intel_dp);
> > >  
> > > -	/*
> > > -	 * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
> > > -	 * for DP the encoder type can be set by the caller to
> > > -	 * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
> > > -	 */
> > > -	if (type == DRM_MODE_CONNECTOR_eDP)
> > > -		intel_encoder->type = INTEL_OUTPUT_EDP;
> > > -
> > > -	/* eDP only on port B and/or C on vlv/chv */
> > > -	if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
> > > -			      IS_CHERRYVIEW(dev_priv)) &&
> > > -			intel_dp_is_edp(intel_dp) &&
> > > -			port != PORT_B && port != PORT_C))
> > > -		return false;
> > > -
> > >  	drm_dbg_kms(&dev_priv->drm,
> > >  		    "Adding %s connector on [ENCODER:%d:%s]\n",
> > >  		    type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
> > > -- 
> > > 2.23.1
> > >