[Intel-gfx] [PATCH v2 10/15] pwm: crc: Implement apply() method to support the new atomic PWM API
Hans de Goede
hdegoede at redhat.com
Sun Jun 7 18:18:35 UTC 2020
Replace the enable, disable and config pwm_ops with an apply op,
to support the new atomic PWM API.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
drivers/pwm/pwm-crc.c | 107 +++++++++++++++++++++++-------------------
1 file changed, 59 insertions(+), 48 deletions(-)
diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
index 53734bcf67e1..58c7e9ef7278 100644
--- a/drivers/pwm/pwm-crc.c
+++ b/drivers/pwm/pwm-crc.c
@@ -41,70 +41,81 @@ static inline struct crystalcove_pwm *to_crc_pwm(struct pwm_chip *pc)
return container_of(pc, struct crystalcove_pwm, chip);
}
-static int crc_pwm_calc_clk_div(int period_ns)
+static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
{
- int clk_div;
-
- clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_MHZ);
- /* clk_div 1 - 128, maps to register values 0-127 */
- if (clk_div > 0)
- clk_div--;
-
- return clk_div;
-}
-
-static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
-{
- struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
- int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
-
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div | PWM_OUTPUT_ENABLE);
- regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
-
- return 0;
-}
-
-static void crc_pwm_disable(struct pwm_chip *c, struct pwm_device *pwm)
-{
- struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
- int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
-
- regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div);
-}
-
-static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
- int duty_ns, int period_ns)
-{
- struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
+ struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
+ int err, clk_div, level, pwm_output_enable;
struct device *dev = crc_pwm->chip.dev;
- int level;
- if (period_ns > PWM_MAX_PERIOD_NS) {
+ if (state->period > PWM_MAX_PERIOD_NS) {
dev_err(dev, "un-supported period_ns\n");
return -EINVAL;
}
- if (pwm_get_period(pwm) != period_ns) {
- int clk_div = crc_pwm_calc_clk_div(period_ns);
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -ENOTSUPP;
+
+ if (pwm_is_enabled(pwm) && !state->enabled) {
+ err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
+ if (err) {
+ dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+ return err;
+ }
+ }
+
+ if (pwm_get_duty_cycle(pwm) != state->duty_cycle ||
+ pwm_get_period(pwm) != state->period) {
+ level = state->duty_cycle * PWM_MAX_LEVEL / state->period;
+ err = regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+ if (err) {
+ dev_err(dev, "Error writing PWM0_DUTY_CYCLE %d\n", err);
+ return err;
+ }
+ }
+
+ if (pwm_is_enabled(pwm) && state->enabled &&
+ pwm_get_period(pwm) != state->period) {
/* changing the clk divisor, clear PWM_OUTPUT_ENABLE first */
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
- clk_div | PWM_OUTPUT_ENABLE);
+ err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
+ if (err) {
+ dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+ return err;
+ }
}
- /* change the pwm duty cycle */
- level = duty_ns * PWM_MAX_LEVEL / period_ns;
- regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+ if (pwm_get_period(pwm) != state->period ||
+ pwm_is_enabled(pwm) != state->enabled) {
+ clk_div = PWM_BASE_CLK_MHZ * state->period /
+ (256 * NSEC_PER_MHZ);
+ /* clk_div 1 - 128, maps to register values 0-127 */
+ if (clk_div > 0)
+ clk_div--;
+
+ pwm_output_enable = state->enabled ? PWM_OUTPUT_ENABLE : 0;
+
+ err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
+ clk_div | pwm_output_enable);
+ if (err) {
+ dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+ return err;
+ }
+ }
+
+ if (!pwm_is_enabled(pwm) && state->enabled) {
+ err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
+ if (err) {
+ dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+ return err;
+ }
+ }
return 0;
}
static const struct pwm_ops crc_pwm_ops = {
- .config = crc_pwm_config,
- .enable = crc_pwm_enable,
- .disable = crc_pwm_disable,
+ .apply = crc_pwm_apply,
};
static int crystalcove_pwm_probe(struct platform_device *pdev)
--
2.26.2
More information about the Intel-gfx
mailing list