[Intel-gfx] [PATCH 02/28] drm/i915/selftests: Make the hanging request non-preemptible
Mika Kuoppala
mika.kuoppala at linux.intel.com
Mon Jun 8 20:58:43 UTC 2020
Chris Wilson <chris at chris-wilson.co.uk> writes:
> In some of our hangtests, we try to reset an active engine while it is
> spinning inside the recursive spinner. However, we also try to flood the
> engine with requests that preempt the hang, and so should disable the
> preemption to be sure that we reset the right request.
>
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/gt/selftest_hangcheck.c | 36 ++++++++++++++------
> 1 file changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/selftest_hangcheck.c b/drivers/gpu/drm/i915/gt/selftest_hangcheck.c
> index 4aa4cc917d8b..035f363fb0f8 100644
> --- a/drivers/gpu/drm/i915/gt/selftest_hangcheck.c
> +++ b/drivers/gpu/drm/i915/gt/selftest_hangcheck.c
> @@ -203,12 +203,12 @@ hang_create_request(struct hang *h, struct intel_engine_cs *engine)
> *batch++ = lower_32_bits(hws_address(hws, rq));
> *batch++ = upper_32_bits(hws_address(hws, rq));
> *batch++ = rq->fence.seqno;
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
>
> memset(batch, 0, 1024);
> batch += 1024 / sizeof(*batch);
>
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
> *batch++ = MI_BATCH_BUFFER_START | 1 << 8 | 1;
> *batch++ = lower_32_bits(vma->node.start);
> *batch++ = upper_32_bits(vma->node.start);
> @@ -217,12 +217,12 @@ hang_create_request(struct hang *h, struct intel_engine_cs *engine)
> *batch++ = 0;
> *batch++ = lower_32_bits(hws_address(hws, rq));
> *batch++ = rq->fence.seqno;
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
>
> memset(batch, 0, 1024);
> batch += 1024 / sizeof(*batch);
>
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
> *batch++ = MI_BATCH_BUFFER_START | 1 << 8;
> *batch++ = lower_32_bits(vma->node.start);
> } else if (INTEL_GEN(gt->i915) >= 4) {
> @@ -230,24 +230,24 @@ hang_create_request(struct hang *h, struct intel_engine_cs *engine)
> *batch++ = 0;
> *batch++ = lower_32_bits(hws_address(hws, rq));
> *batch++ = rq->fence.seqno;
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
>
> memset(batch, 0, 1024);
> batch += 1024 / sizeof(*batch);
>
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
> *batch++ = MI_BATCH_BUFFER_START | 2 << 6;
> *batch++ = lower_32_bits(vma->node.start);
> } else {
> *batch++ = MI_STORE_DWORD_IMM | MI_MEM_VIRTUAL;
> *batch++ = lower_32_bits(hws_address(hws, rq));
> *batch++ = rq->fence.seqno;
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
>
> memset(batch, 0, 1024);
> batch += 1024 / sizeof(*batch);
>
> - *batch++ = MI_ARB_CHECK;
> + *batch++ = MI_NOOP;
> *batch++ = MI_BATCH_BUFFER_START | 2 << 6;
> *batch++ = lower_32_bits(vma->node.start);
> }
> @@ -866,13 +866,29 @@ static int __igt_reset_engines(struct intel_gt *gt,
> count++;
>
> if (rq) {
> + if (rq->fence.error != -EIO) {
> + pr_err("i915_reset_engine(%s:%s):"
> + " failed to reset request %llx:%lld\n",
> + engine->name, test_name,
> + rq->fence.context,
> + rq->fence.seqno);
> + i915_request_put(rq);
> +
> + GEM_TRACE_DUMP();
> + intel_gt_set_wedged(gt);
> + err = -EIO;
> + break;
> + }
> +
> if (i915_request_wait(rq, 0, HZ / 5) < 0) {
> struct drm_printer p =
> drm_info_printer(gt->i915->drm.dev);
>
> pr_err("i915_reset_engine(%s:%s):"
> - " failed to complete request after reset\n",
> - engine->name, test_name);
> + " failed to complete request %llx:%lld after reset\n",
> + engine->name, test_name,
> + rq->fence.context,
> + rq->fence.seqno);
> intel_engine_dump(engine, &p,
> "%s\n", engine->name);
> i915_request_put(rq);
> --
> 2.20.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list