[Intel-gfx] [v3 6/8] drm/i915/display: Implement infoframes readback for LSPCON

[Ville Syrjälä]

On Thu, Jun 11, 2020 at 06:46:50PM +0300, Ville Syrjälä wrote:
> On Thu, Jun 11, 2020 at 12:42:30AM +0530, Uma Shankar wrote:
> > Implemented Infoframes enabled readback for LSPCON devices.
> > This will help align the implementation with state readback
> > infrastructure.
> > 
> > Signed-off-by: Uma Shankar <uma.shankar at intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_lspcon.c | 63 ++++++++++++++++++++-
> >  1 file changed, 61 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> > index 9034ce6f20b9..0ebe9a700291 100644
> > --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> > +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> > @@ -576,11 +576,70 @@ void lspcon_set_infoframes(struct intel_encoder *encoder,
> >  				  buf, ret);
> >  }
> >  
> > +static bool _lspcon_read_avi_infoframe_enabled_mca(struct drm_dp_aux *aux)
> > +{
> > +	int ret;
> > +	u32 val = 0;
> > +	u16 reg = LSPCON_MCA_AVI_IF_CTRL;
> > +
> > +	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
> > +	if (ret < 0) {
> > +		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
> > +		return false;
> > +	}
> > +
> > +	if (val & LSPCON_MCA_AVI_IF_KICKOFF)
> > +		return true;
> > +
> > +	return false;
> 
> return val & ...;
> 
> > +}
> > +
> > +static bool _lspcon_read_avi_infoframe_enabled_parade(struct drm_dp_aux *aux)
> > +{
> > +	int ret;
> > +	u32 val = 0;
> > +	u16 reg = LSPCON_PARADE_AVI_IF_CTRL;
> > +
> > +	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
> > +	if (ret < 0) {
> > +		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
> > +		return false;
> > +	}
> > +
> > +	if (val & LSPCON_PARADE_AVI_IF_KICKOFF)
> > +		return true;
> > +
> > +	return false;
> > +}
> > +
> >  u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
> >  			      const struct intel_crtc_state *pipe_config)
> >  {
> > -	/* FIXME actually read this from the hw */
> > -	return 0;
> > +	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > +	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
> > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +	bool infoframes_enabled;
> > +	u32 mask = 0;
> > +	u32 val;
> > +
> > +	if (lspcon->vendor == LSPCON_VENDOR_MCA)
> > +		infoframes_enabled = _lspcon_read_avi_infoframe_enabled_mca(&intel_dp->aux);
> > +	else
> > +		infoframes_enabled = _lspcon_read_avi_infoframe_enabled_parade(&intel_dp->aux);
> > +
> > +	if (infoframes_enabled)
> > +		return true;
> 
> This is supposed to return a bitmask of all enabled infoframes.

Actually since we're dealing with both the LSPCON specific stuff and
DIP stuff for the DRM infoframe I think we should stop using using
intel_hdmi_infoframes_enabled(), and instead provide a LSPCON specific
replacement for it. That way we can directly return the abstract
bitmask instead of pretending to return a bitmask of the DIP bits.

> 
> Also my question "how do we turn off infoframes once enabled?"
> from https://patchwork.freedesktop.org/patch/351719/?series=72928&rev=1
> still remains unanswered...
> 
> > +
> > +	if (lspcon->hdr_supported) {
> > +		val = intel_de_read(dev_priv,
> > +				    HSW_TVIDEO_DIP_CTL(pipe_config->cpu_transcoder));
> > +		mask |= VIDEO_DIP_ENABLE_GMP_HSW;
> > +
> > +		if (val & mask)
> > +			return val & mask;
> > +	}
> > +
> > +	return false;
> >  }
> >  
> >  void lspcon_resume(struct intel_lspcon *lspcon)
> > -- 
> > 2.22.0
> 
> -- 
> Ville Syrjälä
> Intel

-- 
Ville Syrjälä
Intel