[Intel-gfx] [PATCH v2 1/2] drm/i915/dp: Helper for checking DDI_BUF_CTL Idle status
Manasi Navare
manasi.d.navare at intel.com
Tue Jun 23 19:26:41 UTC 2020
On Mon, Jun 22, 2020 at 08:06:51PM +0300, Ville Syrjälä wrote:
> On Mon, Jun 22, 2020 at 06:49:26PM +0300, Imre Deak wrote:
> > On Wed, Jun 17, 2020 at 05:01:23PM -0700, Manasi Navare wrote:
> > > Modify the helper to add a fixed delay or poll with timeout
> > > based on platform specification in bothe enable and disable
> > > cases so check for either Idle bit set (DDI_BUF_CTL is idle
> > > for disable case) or check for Idle bit = 0 (non idle for
> > > DDI BUF enable case)
> > >
> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Cc: Imre Deak <imre.deak at intel.com>
> > > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_ddi.c | 34 +++++++++++++++---------
> > > 1 file changed, 21 insertions(+), 13 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > index ca7bb2294d2b..e4738c3b6d44 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > @@ -1182,18 +1182,26 @@ static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder,
> > > }
> > >
> > > static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
> > > - enum port port)
> >
> > maybe intel_ddi_wait_for_ddi_buf(i915, port, active) ?
>
> I'd just make it two functions. Avoids that stupid boolean
> parameter.
Just have 2 functions: 1. intel_ddi_wait_for_ddi_buf_idle()
2. intel_ddi_wait_for_ddi_buf_active or _non_idle()?
Hmm but wouldnt it be more readable if we pass that bool and use
the same function?
Manasi
>
> >
> > > + enum port port, bool idle)
> > > {
> > > - i915_reg_t reg = DDI_BUF_CTL(port);
> > > - int i;
> > > -
> > > - for (i = 0; i < 16; i++) {
> > > - udelay(1);
> > > - if (intel_de_read(dev_priv, reg) & DDI_BUF_IS_IDLE)
> > > - return;
> > > + if (idle) {
> > > + if (IS_BROXTON(dev_priv))
> > > + udelay(16);
> > > + else
> > > + if (wait_for_us((intel_de_read(dev_priv, DDI_BUF_CTL(port)) &
> > > + DDI_BUF_IS_IDLE), 16))
> > > + drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c idle bit\n",
> > > + port_name(port));
> > > + } else {
> > > + if (INTEL_GEN(dev_priv) < 10)
> > > + udelay(600);
> > > + else
> > > + if (wait_for_us(!(intel_de_read(dev_priv, DDI_BUF_CTL(port)) &
> > > + DDI_BUF_IS_IDLE), 600))
> > > + drm_err(&dev_priv->drm, "DDI port:%c buffer idle\n",
> > > + port_name(port));
> > > }
> > > - drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c idle bit\n",
> > > - port_name(port));
> > > +
> >
> > since we can only guarantee a minimum delay or timeout, imo it could be just:
> >
> > if (BXT && !active || GEN <= 9 && active) {
> > usleep_range(600, 1000);
> > return;
> > }
> >
> > if (wait_for_us(!(read(BUF_CTL) & IS_IDLE) == active, 600))
> > drm_err("Port %c: Timeout waiting for DDI BUF to get %s\n",
> > port, active ? "active" : "idle"));
> >
> >
> > > }
> > >
> > > static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
> > > @@ -1373,7 +1381,7 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
> > > intel_de_write(dev_priv, DP_TP_CTL(PORT_E), temp);
> > > intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E));
> > >
> > > - intel_wait_ddi_buf_idle(dev_priv, PORT_E);
> > > + intel_wait_ddi_buf_idle(dev_priv, PORT_E, true);
> > >
> > > /* Reset FDI_RX_MISC pwrdn lanes */
> > > temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
> > > @@ -3495,7 +3503,7 @@ static void intel_disable_ddi_buf(struct intel_encoder *encoder,
> > > intel_ddi_disable_fec_state(encoder, crtc_state);
> > >
> > > if (wait)
> > > - intel_wait_ddi_buf_idle(dev_priv, port);
> > > + intel_wait_ddi_buf_idle(dev_priv, port, true);
> > > }
> > >
> > > static void intel_ddi_post_disable_dp(struct intel_atomic_state *state,
> > > @@ -4004,7 +4012,7 @@ static void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
> > > intel_de_posting_read(dev_priv, intel_dp->regs.dp_tp_ctl);
> > >
> > > if (wait)
> > > - intel_wait_ddi_buf_idle(dev_priv, port);
> > > + intel_wait_ddi_buf_idle(dev_priv, port, true);
> > > }
> > >
> > > dp_tp_ctl = DP_TP_CTL_ENABLE |
> >
> > The DSI code could also use the new helper.
> >
> > > --
> > > 2.19.1
> > >
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list