[Intel-gfx] [PATCH v2 3/5] drm/i915: Add PSR2 selective fetch registers

[Souza, Jose]

On Fri, 2020-06-26 at 15:11 +0100, Mun, Gwan-gyeong wrote:
> On Thu, 2020-06-25 at 18:01 -0700, José Roberto de Souza wrote:
> > This registers will be used to implement PSR2 manual
> > tracking/selective
> > fetch.
> > 
> > v2:
> > - Fixed typo in _PLANE_SEL_FETCH_BASE
> > - Renamed PSR2_MAN_TRK_CTL bits to better match spec names
> > - Renamed _PLANE_SEL_FETCH_* to better match spec names
> > 
> > BSpec: 55229
> > BSpec: 50424
> > BSpec: 50420
> > Cc: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
> > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_reg.h | 68 ++++++++++++++++++++++++++++++-
> > --
> >  1 file changed, 63 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index f09120cac89a..8b6eb42b63db 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -4585,6 +4585,18 @@ enum {
> >  #define PSR2_SU_STATUS_MASK(frame)	(0x3ff <<
> > PSR2_SU_STATUS_SHIFT(frame))
> >  #define PSR2_SU_STATUS_FRAMES		8
> >  
> > +#define _PSR2_MAN_TRK_CTL_A				0x60910
> > +#define _PSR2_MAN_TRK_CTL_EDP				0x6f910
> > +#define PSR2_MAN_TRK_CTL(tran)				_MMIO_T
> > RANS2(tran, _PSR2_MAN_TRK_CTL_A)
> > +#define  PSR2_MAN_TRK_CTL_ENABLE			REG_BIT(31)
> > +#define  PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR_MASK	REG_GENMASK(30,
> > 21)
> > +#define  PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(val)	REG_FIELD_PREP(
> > PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR_MASK, val)
> > +#define  PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR_MASK		REG_GEN
> > MASK(20, 11)
> > +#define  PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(val)		REG_FIE
> > LD_PREP(PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR_MASK, val)
> > +#define  PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME		REG_BIT
> > (3)
> > +#define  PSR2_MAN_TRK_CTL_SF_CONTINUOS_FULL_FRAME	REG_BIT(2)
> > +#define  PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE	REG_BIT(1)
> > +
> >  /* VGA port control */
> >  #define ADPA			_MMIO(0x61100)
> >  #define PCH_ADPA                _MMIO(0xe1100)
> > @@ -7148,7 +7160,52 @@ enum {
> >  #define PLANE_COLOR_CTL(pipe, plane)	\
> >  	_MMIO_PLANE(plane, _PLANE_COLOR_CTL_1(pipe),
> > _PLANE_COLOR_CTL_2(pipe))
> >  
> > -#/* SKL new cursor registers */
> > +#define _SEL_FETCH_PLANE_BASE_1_A		0x70890
> > +#define _SEL_FETCH_PLANE_BASE_2_A		0x708B0
> > +#define _SEL_FETCH_PLANE_BASE_3_A		0x708D0
> > +#define _SEL_FETCH_PLANE_BASE_4_A		0x708F0
> > +#define _SEL_FETCH_PLANE_BASE_5_A		0x70920
> > +#define _SEL_FETCH_PLANE_BASE_6_A		0x70940
> > +#define _SEL_FETCH_PLANE_BASE_7_A		0x70960
> > +#define _SEL_FETCH_PLANE_BASE_CUR_A		0x70880
> > +#define _SEL_FETCH_PLANE_BASE_1_B		0x70990
> > +
> > +#define _SEL_FETCH_PLANE_BASE_A(plane) _PICK(plane, \
> > +					     _SEL_FETCH_PLANE_BASE_1_A,
> > \
> > +					     _SEL_FETCH_PLANE_BASE_2_A,
> > \
> > +					     _SEL_FETCH_PLANE_BASE_3_A,
> > \
> > +					     _SEL_FETCH_PLANE_BASE_4_A,
> > \
> > +					     _SEL_FETCH_PLANE_BASE_5_A,
> > \
> > +					     _SEL_FETCH_PLANE_BASE_6_A,
> > \
> > +					     _SEL_FETCH_PLANE_BASE_7_A,
> > \
> > +					     _SEL_FETCH_PLANE_BASE_CUR_
> > A)
> > +#define _SEL_FETCH_PLANE_BASE_1(pipe) _PIPE(pipe,
> > _SEL_FETCH_PLANE_BASE_1_A, _SEL_FETCH_PLANE_BASE_1_B)
> > +#define _SEL_FETCH_PLANE_BASE(pipe, plane)
> > (_SEL_FETCH_PLANE_BASE_1(pipe) - \
> > +					    _SEL_FETCH_PLANE_BASE_1_A +
> > \
> > +					    _SEL_FETCH_PLANE_BASE_A(pla
> > ne))
> > +
> > +#define _SEL_FETCH_PLANE_CTL_1_A		0x70890
> > +#define PLANE_SEL_FETCH_CTL(pipe, plane)
> > _MMIO(_SEL_FETCH_PLANE_BASE(pipe, plane) + \
> > +					       _SEL_FETCH_PLANE_CTL_1_A
> > - \
> > +					       _SEL_FETCH_PLANE_BASE_1_
> > A)
> > +#define PLANE_SET_FETCH_CTL_ENABLE		REG_BIT(31)
> it seems a typo of "PLANE_SEL_FETCH_CTL_ENABLE",
> except for this line, looks good to me.

Yep, thanks for catch up this.

> 
> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
> > +
> > +#define _SEL_FETCH_PLANE_POS_1_A		0x70894
> > +#define PLANE_SEL_FETCH_POS(pipe, plane)
> > _MMIO(_SEL_FETCH_PLANE_BASE(pipe, plane) + \
> > +					       _SEL_FETCH_PLANE_POS_1_A
> > - \
> > +					       _SEL_FETCH_PLANE_BASE_1_
> > A)
> > +
> > +#define _SEL_FETCH_PLANE_SIZE_1_A		0x70898
> > +#define PLANE_SEL_FETCH_SIZE(pipe, plane)
> > _MMIO(_SEL_FETCH_PLANE_BASE(pipe, plane) + \
> > +						_SEL_FETCH_PLANE_SIZE_1
> > _A - \
> > +						_SEL_FETCH_PLANE_BASE_1
> > _A)
> > +
> > +#define _SEL_FETCH_PLANE_OFFSET_1_A		0x7089C
> > +#define PLANE_SEL_FETCH_OFFSET(pipe, plane)
> > _MMIO(_SEL_FETCH_PLANE_BASE(pipe, plane) + \
> > +						  _SEL_FETCH_PLANE_OFFS
> > ET_1_A - \
> > +						  _SEL_FETCH_PLANE_BASE
> > _1_A)
> > +
> > +/* SKL new cursor registers */
> >  #define _CUR_BUF_CFG_A				0x7017c
> >  #define _CUR_BUF_CFG_B				0x7117c
> >  #define CUR_BUF_CFG(pipe)	_MMIO_PIPE(pipe, _CUR_BUF_CFG_A,
> > _CUR_BUF_CFG_B)
> > @@ -7794,11 +7851,12 @@ enum {
> >  # define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE	(1 << 5)
> >  # define CHICKEN3_DGMG_DONE_FIX_DISABLE		(1 << 2)
> >  
> > -#define CHICKEN_PAR1_1		_MMIO(0x42080)
> > +#define CHICKEN_PAR1_1			_MMIO(0x42080)
> >  #define  SKL_DE_COMPRESSED_HASH_MODE	(1 << 15)
> > -#define  DPA_MASK_VBLANK_SRD	(1 << 15)
> > -#define  FORCE_ARB_IDLE_PLANES	(1 << 14)
> > -#define  SKL_EDP_PSR_FIX_RDWRAP	(1 << 3)
> > +#define  DPA_MASK_VBLANK_SRD		(1 << 15)
> > +#define  FORCE_ARB_IDLE_PLANES		(1 << 14)
> > +#define  SKL_EDP_PSR_FIX_RDWRAP		(1 << 3)
> > +#define  IGNORE_PSR2_HW_TRACKING	(1 << 1)
> >  
> >  #define CHICKEN_PAR2_1		_MMIO(0x42090)
> >  #define  KVM_CONFIG_CHANGE_NOTIFICATION_SELECT	(1 << 14)