[Intel-gfx] [PATCH v4 1/2] drm/i915/dp: Helper for checking DDI_BUF_CTL Idle status
Manasi Navare
manasi.d.navare at intel.com
Tue Jun 30 21:10:45 UTC 2020
On Wed, Jul 01, 2020 at 12:03:30AM +0300, Ville Syrjälä wrote:
> On Fri, Jun 26, 2020 at 04:26:40PM -0700, Manasi Navare wrote:
> > Modify the helper to add a fixed delay or poll with timeout
> > based on platform specification to check for either Idle bit
> > set (DDI_BUF_CTL is idle for disable case)
> >
> > v3:
> > * Change the timeout to 16usecs (Ville)
> > v2:
> > * Use 2 separate functions or idle and active (Ville)
> >
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Imre Deak <imre.deak at intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_ddi.c | 17 ++++++++---------
> > 1 file changed, 8 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index 884b507c5f55..052a74625a61 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -1184,16 +1184,15 @@ static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder,
> > static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
> > enum port port)
> > {
> > - i915_reg_t reg = DDI_BUF_CTL(port);
> > - int i;
> > -
> > - for (i = 0; i < 16; i++) {
> > - udelay(1);
> > - if (intel_de_read(dev_priv, reg) & DDI_BUF_IS_IDLE)
> > - return;
> > + if (IS_BROXTON(dev_priv)) {
> > + udelay(16);
> > + return;
> > }
> > - drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c idle bit\n",
> > - port_name(port));
> > +
> > + if (wait_for_us((intel_de_read(dev_priv, DDI_BUF_CTL(port)) &
> > + DDI_BUF_IS_IDLE), 16))
>
> 16 is the BXT number. IIRC the spec said 8 usec for the other platforms.
>
Yes I see for HSW atleast yes it says 8usecs but i left it at 16 since thats
what we always had and the only change was that BXT add a fixed delay
But if you prefer i will change it to 8us timeout?
Manasi
> > + drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c to get idle\n",
> > + port_name(port));
> > }
> >
> > static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
> > --
> > 2.19.1
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list