[Intel-gfx] [PATCH] drm/i915/display: Decrease log level

[Lisovskiy, Stanislav]

On Tue, 2020-03-03 at 03:08 +0530, Swati Sharma wrote:
> Converting error to debug print if sink fails to configure scrambling
> or
> TMDS bit clock ratio. In this case, we are timing out while disabling
> the scrambling and setting the SCDC ratio, as there is no response
> to the I2C SCDC write from the sink device. Error isn't due to
> something
> wrong done from driver side.
> 
> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
> Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>

> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 284219da7df8..457ca88cd277 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3564,8 +3564,9 @@ static void intel_enable_ddi_hdmi(struct
> intel_encoder *encoder,
>  	if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
>  					       crtc_state-
> >hdmi_high_tmds_clock_ratio,
>  					       crtc_state-
> >hdmi_scrambling))
> -		DRM_ERROR("[CONNECTOR:%d:%s] Failed to configure sink
> scrambling/TMDS bit clock ratio\n",
> -			  connector->base.id, connector->name);
> +		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to configure
> sink "
> +			      "scrambling/TMDS bit clock ratio\n",
> +			       connector->base.id, connector->name);
>  
>  	/* Display WA #1143: skl,kbl,cfl */
>  	if (IS_GEN9_BC(dev_priv)) {