[Intel-gfx] [PATCH v4 2/7] drm/dp: get/set phy compliance pattern
Animesh Manna
animesh.manna at intel.com
Tue Mar 10 15:37:40 UTC 2020
During phy compliance auto test mode source need to read
requested test pattern from sink through DPCD. After processing
the request source need to set the pattern. So set/get method
added in drm layer as it is DP protocol.
v2: As per review feedback from Manasi on RFC version,
- added dp revision as function argument in set_phy_pattern api.
- used int for link_rate and u8 for lane_count to align with existing code.
v3: As per review feedback from Harry,
- used sizeof() instead of magic number.
- corrected kernel-doc for drm_dp_phy_test_params structure.
Reviewed-by: Harry Wentland <harry.wentland at amd.com>
Signed-off-by: Animesh Manna <animesh.manna at intel.com>
---
drivers/gpu/drm/drm_dp_helper.c | 94 +++++++++++++++++++++++++++++++++
include/drm/drm_dp_helper.h | 31 +++++++++++
2 files changed, 125 insertions(+)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index c6fbe6e6bc9d..28e59d1ffa93 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -1533,3 +1533,97 @@ int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_S
return num_bpc;
}
EXPORT_SYMBOL(drm_dp_dsc_sink_supported_input_bpcs);
+
+/**
+ * drm_dp_get_phy_test_pattern() - get the requested pattern from the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data)
+{
+ int err;
+ u8 rate, lanes;
+
+ err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate);
+ if (err < 0)
+ return err;
+ data->link_rate = drm_dp_bw_code_to_link_rate(rate);
+
+ err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes);
+ if (err < 0)
+ return err;
+ data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK;
+
+ if (lanes & DP_ENHANCED_FRAME_CAP)
+ data->enhanced_frame_cap = true;
+
+ err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
+ if (err < 0)
+ return err;
+
+ switch (data->phy_pattern) {
+ case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+ err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
+ &data->custom80, sizeof(data->custom80));
+ if (err < 0)
+ return err;
+
+ break;
+ case DP_PHY_TEST_PATTERN_CP2520:
+ err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
+ &data->hbr2_reset,
+ sizeof(data->hbr2_reset));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_dp_get_phy_test_pattern);
+
+/**
+ * drm_dp_set_phy_test_pattern() - set the pattern to the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data, u8 dp_rev)
+{
+ int err, i;
+ u8 link_config[2];
+ u8 test_pattern;
+
+ link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
+ link_config[1] = data->num_lanes;
+ if (data->enhanced_frame_cap)
+ link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
+ if (err < 0)
+ return err;
+
+ test_pattern = data->phy_pattern;
+ if (dp_rev < 0x12) {
+ test_pattern = (test_pattern << 2) &
+ DP_LINK_QUAL_PATTERN_11_MASK;
+ err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET,
+ test_pattern);
+ if (err < 0)
+ return err;
+ } else {
+ for (i = 0; i < data->num_lanes; i++) {
+ err = drm_dp_dpcd_writeb(aux,
+ DP_LINK_QUAL_LANE0_SET + i,
+ test_pattern);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_dp_set_phy_test_pattern);
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 10ddb622a73e..e22cf5b2f174 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -702,6 +702,15 @@
# define DP_TEST_COUNT_MASK 0xf
#define DP_PHY_TEST_PATTERN 0x248
+# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7
+# define DP_PHY_TEST_PATTERN_NONE 0x0
+# define DP_PHY_TEST_PATTERN_D10_2 0x1
+# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2
+# define DP_PHY_TEST_PATTERN_PRBS7 0x3
+# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4
+# define DP_PHY_TEST_PATTERN_CP2520 0x5
+
+#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A
#define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250
#define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251
#define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252
@@ -1598,4 +1607,26 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
#endif
+/**
+ * struct drm_dp_phy_test_params - DP Phy Compliance parameters
+ * @link_rate: Requested Link rate from DPCD 0x219
+ * @num_lanes: Number of lanes requested by sing through DPCD 0x220
+ * @phy_pattern: DP Phy test pattern from DPCD 0x248
+ * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
+ * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259
+ * @enhanced_frame_cap: flag for enhanced frame capability.
+ */
+struct drm_dp_phy_test_params {
+ int link_rate;
+ u8 num_lanes;
+ u8 phy_pattern;
+ u8 hbr2_reset[2];
+ u8 custom80[10];
+ bool enhanced_frame_cap;
+};
+
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data);
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data, u8 dp_rev);
#endif /* _DRM_DP_HELPER_H_ */
--
2.24.0
More information about the Intel-gfx
mailing list