[Intel-gfx] [PATCH v3 3/3] drm/i915/display/fbc: Make fences a nice-to-have for GEN9+

Souza, Jose jose.souza at intel.com
Thu Mar 12 00:35:56 UTC 2020


On Thu, 2020-03-05 at 17:33 -0800, José Roberto de Souza wrote:
> On Thu, 2020-02-20 at 19:26 +0200, Ville Syrjälä wrote:
> > On Tue, Feb 18, 2020 at 05:42:30PM -0800, José Roberto de Souza
> > wrote:
> > > dGFX have local memory so it do not have aperture and do not
> > > support
> > > CPU fences but even for iGFX it have a small number of fences.
> > > 
> > > As replacement for fences to track frontbuffer modifications by
> > > CPU
> > > we have a software tracking that is already in used by FBC and
> > > PSR.
> > > PSR don't support fences so it shows that this tracking is
> > > reliable.
> > > 
> > > So lets make fences a nice-to-have to activate FBC for GEN9+,
> > > this
> > > will allow us to enable FBC for dGFXs and iGFXs even when there
> > > is
> > > no
> > > available fence.
> > > 
> > > We do not set fences to rotated planes but FBC only have
> > > restrictions
> > > against 16bpp, so adding it here.
> > > 
> > > Also adding a new check for the tiling format, fences are only
> > > set
> > > to X and Y tiled planes but again FBC don't have any restrictions
> > > against tiling so adding linear as supported as well, other
> > > formats
> > > should be added after tested but IGT only supports drawing in
> > > thse
> > > 3 formats.
> > > 
> > > intel_fbc_hw_tracking_covers_screen() maybe can also have the
> > > same
> > > treatment as fences but BSpec is not clear if the size limitation
> > > is
> > > for hardware tracking or general use of FBC and I don't have a 5K
> > > display to test it, so keeping as is for safety.
> > > 
> > > v2:
> > > - Added tiling and pixel format rotation checks
> > > - Changed the GEN version not requiring fences to 11 from 9, DDX
> > > needs some changes but it don't have support for GEN11+
> > > 
> > > v3:
> > > - Changed back to GEN9+
> > > - Moved GEN test to inside of tiling_is_valid()
> > > 
> > > Cc: Daniel Vetter <daniel.vetter at intel.com>
> > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_fbc.c | 45
> > > ++++++++++++++++++++----
> > >  drivers/gpu/drm/i915/i915_drv.h          |  1 +
> > >  2 files changed, 39 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c
> > > b/drivers/gpu/drm/i915/display/intel_fbc.c
> > > index 1d76e3646a25..a0d1d661a006 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_fbc.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_fbc.c
> > > @@ -585,7 +585,7 @@ static bool stride_is_valid(struct
> > > drm_i915_private *dev_priv,
> > >  }
> > >  
> > >  static bool pixel_format_is_valid(struct drm_i915_private
> > > *dev_priv,
> > > -				  u32 pixel_format)
> > > +				  u32 pixel_format, unsigned int
> > > rotation)
> > >  {
> > >  	switch (pixel_format) {
> > >  	case DRM_FORMAT_XRGB8888:
> > > @@ -599,6 +599,9 @@ static bool pixel_format_is_valid(struct
> > > drm_i915_private *dev_priv,
> > >  		/* WaFbcOnly1to1Ratio:ctg */
> > >  		if (IS_G4X(dev_priv))
> > >  			return false;
> > > +		if ((rotation & (DRM_MODE_ROTATE_90 |
> > > DRM_MODE_ROTATE_270)) &&
> > > +		    INTEL_GEN(dev_priv) >= 9)
> > > +			return false;
> > 
> > Would still would prefer a rotations_is_valid() or some such thing.
> 
> Like this?
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c
> b/drivers/gpu/drm/i915/display/intel_fbc.c
> index 5e35c894bdf9..692edd45b769 100644
> --- a/drivers/gpu/drm/i915/display/intel_fbc.c
> +++ b/drivers/gpu/drm/i915/display/intel_fbc.c
> @@ -600,15 +600,21 @@ static bool pixel_format_is_valid(struct
> drm_i915_private *dev_priv,
>                 /* WaFbcOnly1to1Ratio:ctg */
>                 if (IS_G4X(dev_priv))
>                         return false;
> -               if ((rotation & (DRM_MODE_ROTATE_90 |
> DRM_MODE_ROTATE_270)) &&
> -                   INTEL_GEN(dev_priv) >= 9)
> -                       return false;
>                 return true;
>         default:
>                 return false;
>         }
>  }
> 
> +static bool rotations_is_valid(struct drm_i915_private *dev_priv,
> +                              u32 pixel_format, unsigned int
> rotation)
> +{
> +       if (INTEL_GEN(dev_priv) >= 9 && pixel_format ==
> DRM_FORMAT_RGB565 &&
> +           rotation & (DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270))
> +               return false;
> +       return true;
> +}
> +
>  /*
>   * For some reason, the hardware tracking starts looking at whatever
> we
>   * programmed as the display plane base address register. It does
> not
> look at
> @@ -810,6 +816,12 @@ static bool intel_fbc_can_activate(struct
> intel_crtc *crtc)
>                 return false;
>         }
> 
> +       if (!rotations_is_valid(dev_priv, cache->fb.format->format,
> +                               cache->plane.rotation)) {
> +               fbc->no_fbc_reason = "plane rotation is invalid";
> +               return false;
> +       }
> +
>         if (cache->plane.pixel_blend_mode !=
> DRM_MODE_BLEND_PIXEL_NONE
> &&
>             cache->fb.format->has_alpha) {
>                 fbc->no_fbc_reason = "per-pixel alpha blending is
> incompatible with FBC";
> 
> 
> > >  		return true;
> > >  	default:
> > >  		return false;
> > > @@ -639,6 +642,22 @@ static bool
> > > intel_fbc_hw_tracking_covers_screen(struct intel_crtc *crtc)
> > >  	return effective_w <= max_w && effective_h <= max_h;
> > >  }
> > >  
> > > +static bool tiling_is_valid(struct drm_i915_private *dev_priv,
> > > +			    uint64_t modifier)
> > > +{
> > > +	switch (modifier) {
> > > +	case DRM_FORMAT_MOD_LINEAR:
> > > +		if (INTEL_GEN(dev_priv) >= 9)
> > > +			return true;
> > 
> > Have we checked that eg. fbcon cursor still blinks correctly
> > with FBC active and all?
> 
> Hum on fbcon FBC is enabled but it never compress, IGT tests with
> fences complete disables are working fine, screen is updated when
> tests
> asks to with FBC enabled and compressing.
> 
> I will debug fbcon a little more to understand why it is never
> compressing. 

Actually is is compressing but is very rare, I even reduced the blink
rate to 1hz but it did not helped.

I have compared the plane registers
between fbcon and IGT both in tiling linear but the only difference is
the plane surface address:

# fbcon
[drm:skl_update_plane [i915]] skl_program_plane() pipeA plane=A
[drm:skl_update_plane [i915]] 	plane_stride=78
[drm:skl_update_plane [i915]] 	plane_pos=0
[drm:skl_update_plane [i915]] 	plane_size=437077f
[drm:skl_update_plane [i915]] 	plane_aux_dist=0
[drm:skl_update_plane [i915]] 	plane_color_ctl=2000
[drm:skl_update_plane [i915]] 	plane_keyval=0
[drm:skl_update_plane [i915]] 	plane_keymsk=0
[drm:skl_update_plane [i915]] 	plane_keymax=ff000000
[drm:skl_update_plane [i915]] 	plane_offset=0
[drm:skl_update_plane [i915]] 	plane_ctl=84000000
[drm:skl_update_plane [i915]] 	plane_surf=40000

# IGT test with tiling linear framebuffer
[drm:skl_update_plane [i915]] skl_program_plane() pipeA plane=A
[drm:skl_update_plane [i915]] 	plane_stride=78
[drm:skl_update_plane [i915]] 	plane_pos=0
[drm:skl_update_plane [i915]] 	plane_size=437077f
[drm:skl_update_plane [i915]] 	plane_aux_dist=0
[drm:skl_update_plane [i915]] 	plane_color_ctl=2000
[drm:skl_update_plane [i915]] 	plane_keyval=0
[drm:skl_update_plane [i915]] 	plane_keymsk=0
[drm:skl_update_plane [i915]] 	plane_keymax=ff000000
[drm:skl_update_plane [i915]] 	plane_offset=0
[drm:skl_update_plane [i915]] 	plane_ctl=84000000
[drm:skl_update_plane [i915]] 	plane_surf=1040000

Do you have any tips of what could be causing this?

> 
> > > +		return false;
> > > +	case I915_FORMAT_MOD_X_TILED:
> > > +	case I915_FORMAT_MOD_Y_TILED:
> > > +		return true;
> > > +	default:
> > > +		return false;
> > > +	}
> > > +}
> > > +
> > >  static void intel_fbc_update_state_cache(struct intel_crtc
> > > *crtc,
> > >  					 const struct intel_crtc_state
> > > *crtc_state,
> > >  					 const struct intel_plane_state
> > > *plane_state)
> > > @@ -672,6 +691,7 @@ static void
> > > intel_fbc_update_state_cache(struct
> > > intel_crtc *crtc,
> > >  
> > >  	cache->fb.format = fb->format;
> > >  	cache->fb.stride = fb->pitches[0];
> > > +	cache->fb.modifier = fb->modifier;
> > >  
> > >  	drm_WARN_ON(&dev_priv->drm, plane_state->flags &
> > > PLANE_HAS_FENCE &&
> > >  		    !plane_state->vma->fence);
> > > @@ -720,23 +740,33 @@ static bool intel_fbc_can_activate(struct
> > > intel_crtc *crtc)
> > >  		return false;
> > >  	}
> > >  
> > > -	/* The use of a CPU fence is mandatory in order to detect
> > > writes
> > > -	 * by the CPU to the scanout and trigger updates to the FBC.
> > > +	/* The use of a CPU fence is one of two ways to detect writes
> > > by the
> > > +	 * CPU to the scanout and trigger updates to the FBC.
> > > +	 *
> > > +	 * The other method is by software tracking(see
> > > +	 * intel_fbc_invalidate/flush()), it will manually notify FBC
> > > and nuke
> > > +	 * the current compressed buffer and recompress it.
> > >  	 *
> > >  	 * Note that is possible for a tiled surface to be unmappable
> > > (and
> > > -	 * so have no fence associated with it) due to aperture
> > > constaints
> > > +	 * so have no fence associated with it) due to aperture
> > > constraints
> > >  	 * at the time of pinning.
> > >  	 *
> > >  	 * FIXME with 90/270 degree rotation we should use the fence on
> > >  	 * the normal GTT view (the rotated view doesn't even have a
> > >  	 * fence). Would need changes to the FBC fence Y offset as
> > > well.
> > > -	 * For now this will effecively disable FBC with 90/270 degree
> > > +	 * For now this will effectively disable FBC with 90/270 degree
> > >  	 * rotation.
> > >  	 */
> > > -	if (cache->fence_id < 0) {
> > > +	if (INTEL_GEN(dev_priv) < 9 && cache->fence_id < 0) {
> > >  		fbc->no_fbc_reason = "framebuffer not tiled or fenced";
> > >  		return false;
> > >  	}
> > > +
> > > +	if (!tiling_is_valid(dev_priv, cache->fb.modifier)) {
> > > +		fbc->no_fbc_reason = "tiling unsupported";
> > > +		return false;
> > > +	}
> > > +
> > >  	if (INTEL_GEN(dev_priv) <= 4 && !IS_G4X(dev_priv) &&
> > >  	    cache->plane.rotation != DRM_MODE_ROTATE_0) {
> > >  		fbc->no_fbc_reason = "rotation unsupported";
> > > @@ -748,7 +778,8 @@ static bool intel_fbc_can_activate(struct
> > > intel_crtc *crtc)
> > >  		return false;
> > >  	}
> > >  
> > > -	if (!pixel_format_is_valid(dev_priv, cache->fb.format-
> > > >format)) 
> > > {
> > > +	if (!pixel_format_is_valid(dev_priv, cache->fb.format->format,
> > > +				   cache->plane.rotation)) {
> > >  		fbc->no_fbc_reason = "pixel format is invalid";
> > >  		return false;
> > >  	}
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > > b/drivers/gpu/drm/i915/i915_drv.h
> > > index 3330b538d379..bf88663d8217 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > @@ -413,6 +413,7 @@ struct intel_fbc {
> > >  		struct {
> > >  			const struct drm_format_info *format;
> > >  			unsigned int stride;
> > > +			u64 modifier;
> > >  		} fb;
> > >  		u16 gen9_wa_cfb_stride;
> > >  		s8 fence_id;
> > > -- 
> > > 2.25.1


More information about the Intel-gfx mailing list