[Intel-gfx] [V8 5/9] drm/i915/dsi: Use private flags to indicate TE in cmd mode

[Jani Nikula]

On Thu, 12 Mar 2020, Vandita Kulkarni <vandita.kulkarni at intel.com> wrote:
> On dsi cmd mode we do not receive vblanks instead
> we would get TE and these flags indicate TE is expected on
> which port.
>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Reviewed-by: Jani Nikula <jani.nikula at intel.com>

Pushed up to and including this patch.

BR,
Jani.

> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 949f4867402b..d452037b1ac9 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1550,6 +1550,24 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
>  	pipe_config->hw.adjusted_mode.private_flags &=
>  					~I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE;
>  
> +	/*
> +	 * In case of TE GATE cmd mode, we
> +	 * receive TE from the slave if
> +	 * dual link is enabled
> +	 */
> +	if (is_cmd_mode(intel_dsi)) {
> +		if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
> +			pipe_config->hw.adjusted_mode.private_flags |=
> +						I915_MODE_FLAG_DSI_USE_TE1 |
> +						I915_MODE_FLAG_DSI_USE_TE0;
> +		else if (intel_dsi->ports == BIT(PORT_B))
> +			pipe_config->hw.adjusted_mode.private_flags |=
> +						I915_MODE_FLAG_DSI_USE_TE1;
> +		else
> +			pipe_config->hw.adjusted_mode.private_flags |=
> +						I915_MODE_FLAG_DSI_USE_TE0;
> +	}
> +
>  	return 0;
>  }

-- 
Jani Nikula, Intel Open Source Graphics Center