[Intel-gfx] [PATCH 07/13] drm/i915/dsi: use struct drm_device based logging

Daniel Vetter daniel at ffwll.ch
Wed Mar 25 08:51:22 UTC 2020


On Fri, Mar 20, 2020 at 04:36:32PM +0200, Jani Nikula wrote:
> Convert all the DRM_* logging macros to the struct drm_device based
> macros to provide device specific logging.
> 
> No functional changes.

Not done with the cocci from Wambui? Please add usual blurb if done with
cocci's help.

> 
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c       | 10 +++++++---
>  drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 11 +++++------
>  drivers/gpu/drm/i915/display/vlv_dsi.c       |  3 ++-
>  3 files changed, 14 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 17cee6f80d8b..1ca1f377419c 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -186,16 +186,19 @@ static int dsi_send_pkt_hdr(struct intel_dsi_host *host,
>  static int dsi_send_pkt_payld(struct intel_dsi_host *host,
>  			      struct mipi_dsi_packet pkt)
>  {
> +	struct intel_dsi *intel_dsi = host->intel_dsi;
> +	struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
> +
>  	/* payload queue can accept *256 bytes*, check limit */
>  	if (pkt.payload_length > MAX_PLOAD_CREDIT * 4) {
> -		DRM_ERROR("payload size exceeds max queue limit\n");
> +		drm_err(&i915->drm, "payload size exceeds max queue limit\n");
>  		return -1;
>  	}
>  
>  	/* load data into command payload queue */
>  	if (!add_payld_to_queue(host, pkt.payload,
>  				pkt.payload_length)) {
> -		DRM_ERROR("adding payload to queue failed\n");
> +		drm_err(&i915->drm, "adding payload to queue failed\n");
>  		return -1;
>  	}
>  
> @@ -1417,6 +1420,7 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
>  				    struct intel_crtc_state *pipe_config,
>  				    struct drm_connector_state *conn_state)
>  {
> +	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
>  	struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
>  						   base);
>  	struct intel_connector *intel_connector = intel_dsi->attached_connector;
> @@ -1446,7 +1450,7 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
>  	pipe_config->clock_set = true;
>  
>  	if (gen11_dsi_dsc_compute_config(encoder, pipe_config))
> -		DRM_DEBUG_KMS("Attempting to use DSC failed\n");
> +		drm_dbg_kms(&i915->drm, "Attempting to use DSC failed\n");
>  
>  	pipe_config->port_clock = afe_clk(encoder, pipe_config) / 5;
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> index 574dcfec9577..3c9c05478a03 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> @@ -453,8 +453,7 @@ static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
>  
>  static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
>  {
> -	struct drm_device *drm_dev = intel_dsi->base.base.dev;
> -	struct device *dev = &drm_dev->pdev->dev;
> +	struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
>  	struct i2c_adapter *adapter;
>  	struct i2c_msg msg;
>  	int ret;
> @@ -471,7 +470,7 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
>  
>  	adapter = i2c_get_adapter(intel_dsi->i2c_bus_num);
>  	if (!adapter) {
> -		DRM_DEV_ERROR(dev, "Cannot find a valid i2c bus for xfer\n");
> +		drm_err(&i915->drm, "Cannot find a valid i2c bus for xfer\n");
>  		goto err_bus;
>  	}
>  
> @@ -489,9 +488,9 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
>  
>  	ret = i2c_transfer(adapter, &msg, 1);
>  	if (ret < 0)
> -		DRM_DEV_ERROR(dev,
> -			      "Failed to xfer payload of size (%u) to reg (%u)\n",
> -			      payload_size, reg_offset);

One left to fix in i915 per my count, unfortunately tons more of
DRM_DEV_ERROR all over drm :-/

> +		drm_err(&i915->drm,
> +			"Failed to xfer payload of size (%u) to reg (%u)\n",
> +			payload_size, reg_offset);
>  
>  	kfree(payload_data);
>  err_alloc:
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index f4c362dc6e15..456909ee37a7 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -875,10 +875,11 @@ static void intel_dsi_disable(struct intel_encoder *encoder,
>  			      const struct intel_crtc_state *old_crtc_state,
>  			      const struct drm_connector_state *old_conn_state)
>  {
> +	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
>  	enum port port;
>  
> -	DRM_DEBUG_KMS("\n");
> +	drm_dbg_kms(&i915->drm, "\n");
>  
>  	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
>  	intel_panel_disable_backlight(old_conn_state);

Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>

> -- 
> 2.20.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the Intel-gfx mailing list