[Intel-gfx] [PATCH v3 4/5] drm/i915: Adjust CDCLK accordingly to our DBuf bw needs
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon Mar 30 17:07:31 UTC 2020
On Mon, Mar 30, 2020 at 03:23:53PM +0300, Stanislav Lisovskiy wrote:
> According to BSpec max BW per slice is calculated using formula
> Max BW = CDCLK * 64. Currently when calculating min CDCLK we
> account only per plane requirements, however in order to avoid
> FIFO underruns we need to estimate accumulated BW consumed by
> all planes(ddb entries basically) residing on that particular
> DBuf slice. This will allow us to put CDCLK lower and save power
> when we don't need that much bandwidth or gain additional
> performance once plane consumption grows.
>
> v2: - Fix long line warning
> - Limited new DBuf bw checks to only gens >= 11
>
> v3: - Lets track used Dbuf bw per slice and per crtc in bw state
> (or may be in DBuf state in future), that way we don't need
> to have all crtcs in state and those only if we detect if
> are actually going to change cdclk, just same way as we
> do with other stuff, i.e intel_atomic_serialize_global_state
> and co. Just as per Ville's paradigm.
> - Made dbuf bw calculation procedure look nicer by introducing
> for_each_dbuf_slice_in_mask - we often will now need to iterate
> slices using mask.
> - According to experimental results CDCLK * 64 accounts for
> overall bandwidth across all dbufs, not per dbuf.
>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_bw.c | 61 ++++++++++++++++++-
> drivers/gpu/drm/i915/display/intel_bw.h | 8 +++
> drivers/gpu/drm/i915/display/intel_cdclk.c | 25 ++++++++
> drivers/gpu/drm/i915/display/intel_display.c | 8 +++
> .../drm/i915/display/intel_display_power.h | 2 +
> drivers/gpu/drm/i915/intel_pm.c | 34 ++++++++++-
> drivers/gpu/drm/i915/intel_pm.h | 3 +
> 7 files changed, 138 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
> index 573a1c206b60..e9d65820fb76 100644
> --- a/drivers/gpu/drm/i915/display/intel_bw.c
> +++ b/drivers/gpu/drm/i915/display/intel_bw.c
> @@ -6,6 +6,7 @@
> #include <drm/drm_atomic_state_helper.h>
>
> #include "intel_bw.h"
> +#include "intel_pm.h"
> #include "intel_display_types.h"
> #include "intel_sideband.h"
> #include "intel_atomic.h"
> @@ -338,7 +339,6 @@ static unsigned int intel_bw_crtc_data_rate(const struct intel_crtc_state *crtc_
>
> return data_rate;
> }
> -
> void intel_bw_crtc_update(struct intel_bw_state *bw_state,
> const struct intel_crtc_state *crtc_state)
> {
> @@ -419,6 +419,65 @@ intel_atomic_bw_get_state(struct intel_atomic_state *state)
> return to_intel_bw_state(bw_state);
> }
>
> +int intel_bw_calc_min_cdclk(struct intel_atomic_state *state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> + int i = 0;
> + enum plane_id plane_id;
> + struct intel_crtc_state *crtc_state;
const
> + struct intel_crtc *crtc;
> + int max_bw = 0;
> + int min_cdclk;
> + enum pipe pipe;
> + struct intel_bw_state *bw_state;
> + int slice_id = 0;
Bunch of needless intiialization, needlessly wide scope, etc.
> +
> + bw_state = intel_atomic_bw_get_state(state);
> +
Spurious whitespace.
> + if (IS_ERR(bw_state))
> + return PTR_ERR(bw_state);
> +
> + for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
> + struct intel_crtc_bw *crtc_bw = &bw_state->dbuf_bw_used[crtc->pipe];
> +
> + memset(&crtc_bw->dbuf_bw, 0, sizeof(crtc_bw->dbuf_bw));
> +
> + for_each_plane_id_on_crtc(crtc, plane_id) {
> + struct skl_ddb_entry *plane_alloc =
> + &crtc_state->wm.skl.plane_ddb_y[plane_id];
> + struct skl_ddb_entry *uv_plane_alloc =
> + &crtc_state->wm.skl.plane_ddb_uv[plane_id];
const
> + unsigned int data_rate = crtc_state->data_rate[plane_id];
> +
more strange whitespace
> + unsigned int dbuf_mask = skl_ddb_dbuf_slice_mask(dev_priv, plane_alloc);
> +
> + dbuf_mask |= skl_ddb_dbuf_slice_mask(dev_priv, uv_plane_alloc);
Looks bad when you initialize part of it in declaration and the rest
later.
> +
> + DRM_DEBUG_KMS("Got dbuf mask %x for pipe %c ddb %d-%d plane %d data rate %d\n",
> + dbuf_mask, pipe_name(crtc->pipe), plane_alloc->start,
> + plane_alloc->end, plane_id, data_rate);
> +
> + for_each_dbuf_slice_in_mask(slice_id, dbuf_mask)
> + crtc_bw->dbuf_bw[slice_id] += data_rate;
This doesn't feel quite right for planar formats.
For pre-icl it works by accident since we only have the one slice so
we don't end up accounting for the full bandwidth from both color planes
to multiple slices. If we had multiple slices and chroma and luma had
been allocated to different slices we'd count the same thing multiple
times.
For icl+ we seem to assign the full data rate to the UV plane's slice(s)
since only the UV plane has data_rate[] != 0.
> + }
> + }
> +
> + for_each_dbuf_slice(slice_id) {
> + int total_bw_per_slice = 0;
> +
> + for_each_pipe(dev_priv, pipe) {
> + struct intel_crtc_bw *crtc_bw = &bw_state->dbuf_bw_used[pipe];
> +
> + total_bw_per_slice += crtc_bw->dbuf_bw[slice_id];
> + }
> + max_bw += total_bw_per_slice;
So we're aggregating all the bw instead of per-slice? Is this based on
the other mail you sent? Deserves a comment explaining why we do such
odd things.
> + }
> +
> + min_cdclk = max_bw / 64;
> +
> + return min_cdclk;
> +}
> +
> int intel_bw_atomic_check(struct intel_atomic_state *state)
> {
> struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h
> index 9a5627be6876..d2b5f32b0791 100644
> --- a/drivers/gpu/drm/i915/display/intel_bw.h
> +++ b/drivers/gpu/drm/i915/display/intel_bw.h
> @@ -10,11 +10,16 @@
>
> #include "intel_display.h"
> #include "intel_global_state.h"
> +#include "intel_display_power.h"
>
> struct drm_i915_private;
> struct intel_atomic_state;
> struct intel_crtc_state;
>
> +struct intel_crtc_bw {
> + int dbuf_bw[I915_MAX_DBUF_SLICES];
> +};
> +
> struct intel_bw_state {
> struct intel_global_state base;
>
> @@ -31,6 +36,8 @@ struct intel_bw_state {
> */
> u8 qgv_points_mask;
>
> + struct intel_crtc_bw dbuf_bw_used[I915_MAX_PIPES];
The name of the struct isn't very good if it just contains the
dbuf bw numbers.
> +
> unsigned int data_rate[I915_MAX_PIPES];
> u8 num_active_planes[I915_MAX_PIPES];
Maybe collect all this to the per-crtc struct?
> };
> @@ -53,5 +60,6 @@ void intel_bw_crtc_update(struct intel_bw_state *bw_state,
> const struct intel_crtc_state *crtc_state);
> int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
> u32 points_mask);
> +int intel_bw_calc_min_cdclk(struct intel_atomic_state *state);
>
> #endif /* __INTEL_BW_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index 979a0241fdcb..036774e7f3ec 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -25,6 +25,7 @@
> #include "intel_cdclk.h"
> #include "intel_display_types.h"
> #include "intel_sideband.h"
> +#include "intel_bw.h"
>
> /**
> * DOC: CDCLK / RAWCLK
> @@ -2001,11 +2002,19 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
> {
> struct drm_i915_private *dev_priv =
> to_i915(crtc_state->uapi.crtc->dev);
> + struct intel_atomic_state *state = NULL;
> int min_cdclk;
>
> if (!crtc_state->hw.enable)
> return 0;
>
> + /*
> + * FIXME: Unfortunately when this gets called from intel_modeset_setup_hw_state
> + * there is no intel_atomic_state at all. So lets not then use it.
> + */
> + if (crtc_state->uapi.state)
> + state = to_intel_atomic_state(crtc_state->uapi.state);
This still indicates that either this isn't the right place to call this
or we have the state stored in the wrong place.
I think I'd just move the thing into intel_compute_min_cdclk() as a start.
> +
> min_cdclk = intel_pixel_rate_to_cdclk(crtc_state);
>
> /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
> @@ -2080,6 +2089,22 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
> if (IS_TIGERLAKE(dev_priv))
> min_cdclk = max(min_cdclk, (int)crtc_state->pixel_rate);
>
> + /*
> + * Similar story as with skl_write_plane_wm and intel_enable_sagv
> + * - in some certain driver parts, we don't have any guarantee that
> + * parent exists. So we might be having a crtc_state without
> + * parent state.
> + */
> + if (INTEL_GEN(dev_priv) >= 11) {
> + if (state) {
> + int dbuf_bw_cdclk = intel_bw_calc_min_cdclk(state);
> +
> + DRM_DEBUG_KMS("DBuf bw min cdclk %d current min_cdclk %d\n",
> + dbuf_bw_cdclk, min_cdclk);
> + min_cdclk = max(min_cdclk, dbuf_bw_cdclk);
> + }
> + }
> +
> if (min_cdclk > dev_priv->max_cdclk_freq) {
> drm_dbg_kms(&dev_priv->drm,
> "required cdclk (%d kHz) exceeds max (%d kHz)\n",
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 9fd32d61ebfe..fa2870c0d7fd 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14678,6 +14678,14 @@ static int intel_atomic_check_planes(struct intel_atomic_state *state,
> if (old_active_planes == new_active_planes)
> continue;
>
> + /*
> + * active_planes bitmask has been updated, whenever amount
> + * of active planes had changed we need to recalculate CDCLK
> + * as it depends on total bandwidth now, not only min_cdclk
> + * per plane.
> + */
> + *need_cdclk_calc = true;
> +
> ret = intel_crtc_add_planes_to_state(state, crtc, new_active_planes);
> if (ret)
> return ret;
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
> index 468e8fb0203a..9e33fb90422f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.h
> @@ -308,6 +308,8 @@ intel_display_power_put_async(struct drm_i915_private *i915,
> }
> #endif
>
> +#define I915_MAX_DBUF_SLICES 2
> +
> enum dbuf_slice {
> DBUF_S1,
> DBUF_S2,
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 551933e3f7da..5dcd1cd09ad7 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4055,10 +4055,9 @@ icl_get_first_dbuf_slice_offset(u32 dbuf_slice_mask,
> return offset;
> }
>
> -static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv)
> +u16 intel_get_ddb_size(struct drm_i915_private *dev_priv)
> {
> u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
> -
> drm_WARN_ON(&dev_priv->drm, ddb_size == 0);
>
> if (INTEL_GEN(dev_priv) < 11)
> @@ -4067,6 +4066,37 @@ static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv)
> return ddb_size;
> }
>
> +u32 skl_ddb_dbuf_slice_mask(struct drm_i915_private *dev_priv,
> + const struct skl_ddb_entry *entry)
> +{
> + u32 slice_mask = 0;
> + u16 ddb_size = intel_get_ddb_size(dev_priv);
> + u16 num_supported_slices = INTEL_INFO(dev_priv)->num_supported_dbuf_slices;
> + u16 slice_size = ddb_size / num_supported_slices;
> + u16 start_slice;
> + u16 end_slice;
> +
> + if (!skl_ddb_entry_size(entry))
> + return 0;
> +
> + start_slice = entry->start / slice_size;
> + end_slice = (entry->end - 1) / slice_size;
> +
> + DRM_DEBUG_KMS("ddb size %d slices %d slice size %d start slice %d end slice %d\n",
> + ddb_size, num_supported_slices, slice_size, start_slice, end_slice);
> +
> + /*
> + * Per plane DDB entry can in a really worst case be on multiple slices
> + * but single entry is anyway contigious.
> + */
> + while (start_slice <= end_slice) {
> + slice_mask |= 1 << start_slice;
> + start_slice++;
> + }
GENMASK() or somehting?
> +
> + return slice_mask;
> +}
> +
> static u8 skl_compute_dbuf_slices(const struct intel_crtc_state *crtc_state,
> u8 active_pipes);
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
> index 069515f04170..41c61ad71ce6 100644
> --- a/drivers/gpu/drm/i915/intel_pm.h
> +++ b/drivers/gpu/drm/i915/intel_pm.h
> @@ -37,6 +37,9 @@ void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
> struct skl_ddb_entry *ddb_y,
> struct skl_ddb_entry *ddb_uv);
> void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv);
> +u16 intel_get_ddb_size(struct drm_i915_private *dev_priv);
> +u32 skl_ddb_dbuf_slice_mask(struct drm_i915_private *dev_priv,
> + const struct skl_ddb_entry *entry);
> void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
> struct skl_pipe_wm *out);
> void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
> --
> 2.24.1.485.gad05a3d8e5
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list