[Intel-gfx] [PATCH v2 08/22] drm/i915/rkl: Add power well support
Matt Roper
matthew.d.roper at intel.com
Mon May 4 22:52:13 UTC 2020
RKL power wells are similar to TGL power wells, but have some important
differences:
* PG1 now has pipe A's VDSC (rather than sticking it in PG2)
* PG2 no longer exists
* DDI-C (aka TC-1) moves from PG1 -> PG3
* PG5 no longer exists due to the lack of a fourth pipe
Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually
be programmed as TC-1 and TC-2 even though this platform doesn't have TC
outputs.
Bspec: 49234
Cc: Imre Deak <imre.deak at intel.com>
Cc: Lucas De Marchi <lucas.demarchi at intel.com>
Cc: Anshuman Gupta <anshuman.gupta at intel.com>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
.../drm/i915/display/intel_display_power.c | 185 +++++++++++++++++-
drivers/gpu/drm/i915/display/intel_vdsc.c | 4 +-
2 files changed, 186 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 49998906cc61..71691919d101 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -2913,6 +2913,53 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
BIT_ULL(POWER_DOMAIN_AUX_I_TBT) | \
BIT_ULL(POWER_DOMAIN_TC_COLD_OFF))
+#define RKL_PW_4_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PIPE_C) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+#define RKL_PW_3_POWER_DOMAINS ( \
+ RKL_PW_4_POWER_DOMAINS | \
+ BIT_ULL(POWER_DOMAIN_PIPE_B) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_AUDIO) | \
+ BIT_ULL(POWER_DOMAIN_VGA) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_E_LANES) | \
+ BIT_ULL(POWER_DOMAIN_AUX_D) | \
+ BIT_ULL(POWER_DOMAIN_AUX_E) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+/*
+ * There is no PW_2/PG_2 on RKL.
+ *
+ * RKL PW_1/PG_1 domains (under HW/DMC control):
+ * - DBUF function (note: registers are in PW0)
+ * - PIPE_A and its planes and VDSC/joining, except VGA
+ * - transcoder A
+ * - DDI_A and DDI_B
+ * - FBC
+ *
+ * RKL PW_0/PG_0 domains (under HW/DMC control):
+ * - PCI
+ * - clocks except port PLL
+ * - shared functions:
+ * * interrupts except pipe interrupts
+ * * MBus except PIPE_MBUS_DBOX_CTL
+ * * DBUF registers
+ * - central power except FBC
+ * - top-level GTC (DDI-level GTC is in the well associated with the DDI)
+ */
+
+#define RKL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
+ RKL_PW_3_POWER_DOMAINS | \
+ BIT_ULL(POWER_DOMAIN_MODESET) | \
+ BIT_ULL(POWER_DOMAIN_AUX_A) | \
+ BIT_ULL(POWER_DOMAIN_AUX_B) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
.sync_hw = i9xx_power_well_sync_hw_noop,
.enable = i9xx_always_on_power_well_noop,
@@ -4283,6 +4330,140 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
},
};
+static const struct i915_power_well_desc rkl_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = true,
+ .domains = POWER_DOMAIN_MASK,
+ .ops = &i9xx_always_on_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ },
+ {
+ .name = "power well 1",
+ /* Handled by the DMC firmware */
+ .always_on = true,
+ .domains = 0,
+ .ops = &hsw_power_well_ops,
+ .id = SKL_DISP_PW_1,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_1,
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "DC off",
+ .domains = RKL_DISPLAY_DC_OFF_POWER_DOMAINS,
+ .ops = &gen9_dc_off_power_well_ops,
+ .id = SKL_DISP_DC_OFF,
+ },
+ {
+ .name = "power well 3",
+ .domains = RKL_PW_3_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = ICL_DISP_PW_3,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_3,
+ .hsw.irq_pipe_mask = BIT(PIPE_B),
+ .hsw.has_vga = true,
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "power well 4",
+ .domains = RKL_PW_4_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_4,
+ .hsw.has_fuses = true,
+ .hsw.irq_pipe_mask = BIT(PIPE_C),
+ }
+ },
+ {
+ .name = "DDI A IO",
+ .domains = ICL_DDI_IO_A_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_A,
+ }
+ },
+ {
+ .name = "DDI B IO",
+ .domains = ICL_DDI_IO_B_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_B,
+ }
+ },
+ {
+ .name = "DDI D TC1 IO",
+ .domains = TGL_DDI_IO_D_TC1_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_DDI_TC1,
+ },
+ },
+ {
+ .name = "DDI E TC2 IO",
+ .domains = TGL_DDI_IO_E_TC2_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_DDI_TC2,
+ },
+ },
+ {
+ .name = "AUX A",
+ .domains = ICL_AUX_A_IO_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_A,
+ },
+ },
+ {
+ .name = "AUX B",
+ .domains = ICL_AUX_B_IO_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_B,
+ },
+ },
+ {
+ .name = "AUX D TC1",
+ .domains = TGL_AUX_D_TC1_IO_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TC1,
+ },
+ },
+ {
+ .name = "AUX E TC2",
+ .domains = TGL_AUX_E_TC2_IO_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TC2,
+ },
+ },
+};
+
static int
sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
int disable_power_well)
@@ -4428,7 +4609,9 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
* The enabling order will be from lower to higher indexed wells,
* the disabling order is reversed.
*/
- if (IS_GEN(dev_priv, 12)) {
+ if (IS_ROCKETLAKE(dev_priv)) {
+ err = set_power_wells(power_domains, rkl_power_wells);
+ } else if (IS_GEN(dev_priv, 12)) {
err = set_power_wells(power_domains, tgl_power_wells);
} else if (IS_GEN(dev_priv, 11)) {
err = set_power_wells(power_domains, icl_power_wells);
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 95ad87d4ccb3..d145fe2bed81 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -476,13 +476,13 @@ intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)
* POWER_DOMAIN_TRANSCODER_VDSC_PW2 power domain in two cases:
*
* - ICL eDP/DSI transcoder
- * - TGL pipe A
+ * - Gen12+ (except RKL) pipe A
*
* For any other pipe, VDSC/joining uses the power well associated with
* the pipe in use. Hence another reference on the pipe power domain
* will suffice. (Except no VDSC/joining on ICL pipe A.)
*/
- if (INTEL_GEN(i915) >= 12 && pipe == PIPE_A)
+ if (INTEL_GEN(i915) >= 12 && !IS_ROCKETLAKE(i915) && pipe == PIPE_A)
return POWER_DOMAIN_TRANSCODER_VDSC_PW2;
else if (is_pipe_dsc(crtc_state))
return POWER_DOMAIN_PIPE(pipe);
--
2.24.1
More information about the Intel-gfx
mailing list