[Intel-gfx] [PATCH v27 2/6] drm/i915: Separate icl and skl SAGV checking

Ville Syrjälä ville.syrjala at linux.intel.com
Tue May 5 11:01:16 UTC 2020


On Tue, May 05, 2020 at 01:42:46PM +0300, Ville Syrjälä wrote:
> On Tue, May 05, 2020 at 01:22:43PM +0300, Stanislav Lisovskiy wrote:
> > Introduce platform dependent SAGV checking in
> > combination with bandwidth state pipe SAGV mask.
> > 
> > v2, v3, v4, v5, v6: Fix rebase conflict
> > 
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_pm.c | 30 ++++++++++++++++++++++++++++--
> >  1 file changed, 28 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > index da567fac7c93..c7d726a656b2 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -3853,6 +3853,24 @@ static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state
> >  	return true;
> >  }
> >  
> > +static bool skl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
> > +{
> > +	struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
> > +	/*
> > +	 * SKL+ workaround: bspec recommends we disable SAGV when we have
> > +	 * more then one pipe enabled
> > +	 */
> > +	if (hweight8(state->active_pipes) > 1)
> > +		return false;
> 
> That stuff should no longer be here since we now have it done properly
> in intel_can_eanble_sagv().
> 
> > +
> > +	return intel_crtc_can_enable_sagv(crtc_state);
> > +}
> > +
> > +static bool icl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
> > +{
> > +	return intel_crtc_can_enable_sagv(crtc_state);
> > +}
> 
> This looks the wrong way around. IMO intel_crtc_can_enable_sagv()
> should rather call the skl vs. icl variants as needed. Although we
> don't yet have the icl variant so the oerdering of the patches is
> a bit weird.

Do we even need an icl variant actually? Does it use the skl or tgl
way of checking for sagv yes vs. no?

> 
> > +
> >  bool intel_can_enable_sagv(const struct intel_bw_state *bw_state)
> >  {
> >  	if (bw_state->active_pipes && !is_power_of_2(bw_state->active_pipes))
> > @@ -3863,22 +3881,30 @@ bool intel_can_enable_sagv(const struct intel_bw_state *bw_state)
> >  
> >  static int intel_compute_sagv_mask(struct intel_atomic_state *state)
> >  {
> > +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> >  	int ret;
> >  	struct intel_crtc *crtc;
> > -	struct intel_crtc_state *new_crtc_state;
> > +	const struct intel_crtc_state *new_crtc_state;
> >  	struct intel_bw_state *new_bw_state = NULL;
> >  	const struct intel_bw_state *old_bw_state = NULL;
> >  	int i;
> >  
> >  	for_each_new_intel_crtc_in_state(state, crtc,
> >  					 new_crtc_state, i) {
> > +		bool can_sagv;
> > +
> >  		new_bw_state = intel_atomic_get_bw_state(state);
> >  		if (IS_ERR(new_bw_state))
> >  			return PTR_ERR(new_bw_state);
> >  
> >  		old_bw_state = intel_atomic_get_old_bw_state(state);
> >  
> > -		if (intel_crtc_can_enable_sagv(new_crtc_state))
> > +		if (INTEL_GEN(dev_priv) >= 11)
> > +			can_sagv = icl_crtc_can_enable_sagv(new_crtc_state);
> > +		else
> > +			can_sagv = skl_crtc_can_enable_sagv(new_crtc_state);
> > +
> > +		if (can_sagv)
> >  			new_bw_state->pipe_sagv_reject &= ~BIT(crtc->pipe);
> >  		else
> >  			new_bw_state->pipe_sagv_reject |= BIT(crtc->pipe);
> > -- 
> > 2.24.1.485.gad05a3d8e5
> 
> -- 
> Ville Syrjälä
> Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel


More information about the Intel-gfx mailing list