[Intel-gfx] [PATCH v2 08/22] drm/i915/rkl: Add power well support
Anshuman Gupta
anshuman.gupta at intel.com
Wed May 6 12:13:18 UTC 2020
On 2020-05-05 at 19:09:54 +0300, Imre Deak wrote:
> On Tue, May 05, 2020 at 07:39:04AM -0700, Matt Roper wrote:
> > On Tue, May 05, 2020 at 10:20:58AM +0530, Anshuman Gupta wrote:
> > > On 2020-05-04 at 15:52:13 -0700, Matt Roper wrote:
> > > > RKL power wells are similar to TGL power wells, but have some important
> > > > differences:
> > > >
> > > > * PG1 now has pipe A's VDSC (rather than sticking it in PG2)
> > > > * PG2 no longer exists
> > > > * DDI-C (aka TC-1) moves from PG1 -> PG3
> > > > * PG5 no longer exists due to the lack of a fourth pipe
> > > >
> > > > Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually
> > > > be programmed as TC-1 and TC-2 even though this platform doesn't have TC
> > > > outputs.
Looks good to me.
Reviewed-by: Anshuman Gupta <anshuman.gupta at intel.com>
> > > >
> > > > Bspec: 49234
> > > > Cc: Imre Deak <imre.deak at intel.com>
> > > > Cc: Lucas De Marchi <lucas.demarchi at intel.com>
> > > > Cc: Anshuman Gupta <anshuman.gupta at intel.com>
> > > > Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> > > > ---
> > > > .../drm/i915/display/intel_display_power.c | 185 +++++++++++++++++-
> > > > drivers/gpu/drm/i915/display/intel_vdsc.c | 4 +-
> > > > 2 files changed, 186 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
> > > > index 49998906cc61..71691919d101 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> > > > @@ -2913,6 +2913,53 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
> > > > BIT_ULL(POWER_DOMAIN_AUX_I_TBT) | \
> > > > BIT_ULL(POWER_DOMAIN_TC_COLD_OFF))
> > > >
> > > > +#define RKL_PW_4_POWER_DOMAINS ( \
> > > > + BIT_ULL(POWER_DOMAIN_PIPE_C) | \
> > > > + BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
> > > > + BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
> > > > + BIT_ULL(POWER_DOMAIN_INIT))
> > > > +
> > > > +#define RKL_PW_3_POWER_DOMAINS ( \
> > > > + RKL_PW_4_POWER_DOMAINS | \
> > > > + BIT_ULL(POWER_DOMAIN_PIPE_B) | \
> > > > + BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
> > > > + BIT_ULL(POWER_DOMAIN_AUDIO) | \
> > > > + BIT_ULL(POWER_DOMAIN_VGA) | \
> > > > + BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
> > > > + BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
> > > > + BIT_ULL(POWER_DOMAIN_PORT_DDI_E_LANES) | \
> > > > + BIT_ULL(POWER_DOMAIN_AUX_D) | \
> > > > + BIT_ULL(POWER_DOMAIN_AUX_E) | \
> > > > + BIT_ULL(POWER_DOMAIN_INIT))
> > > > +
> > > > +/*
> > > > + * There is no PW_2/PG_2 on RKL.
> > > > + *
> > > > + * RKL PW_1/PG_1 domains (under HW/DMC control):
> > > > + * - DBUF function (note: registers are in PW0)
> > > > + * - PIPE_A and its planes and VDSC/joining, except VGA
> > > > + * - transcoder A
> > > > + * - DDI_A and DDI_B
> > > > + * - FBC
> > > > + *
> > > > + * RKL PW_0/PG_0 domains (under HW/DMC control):
> > > > + * - PCI
> > > > + * - clocks except port PLL
> > > > + * - shared functions:
> > > > + * * interrupts except pipe interrupts
> > > > + * * MBus except PIPE_MBUS_DBOX_CTL
> > > > + * * DBUF registers
> > > > + * - central power except FBC
> > > > + * - top-level GTC (DDI-level GTC is in the well associated with the DDI)
> > > > + */
> > > > +
> > > > +#define RKL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
> > > > + RKL_PW_3_POWER_DOMAINS | \
> > > > + BIT_ULL(POWER_DOMAIN_MODESET) | \
> > > > + BIT_ULL(POWER_DOMAIN_AUX_A) | \
> > > > + BIT_ULL(POWER_DOMAIN_AUX_B) | \
> > > > + BIT_ULL(POWER_DOMAIN_INIT))
> > > > +
> > > > static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
> > > > .sync_hw = i9xx_power_well_sync_hw_noop,
> > > > .enable = i9xx_always_on_power_well_noop,
> > > > @@ -4283,6 +4330,140 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
> > > > },
> > > > };
> > > >
> > > > +static const struct i915_power_well_desc rkl_power_wells[] = {
> > > > + {
> > > > + .name = "always-on",
> > > > + .always_on = true,
> > > > + .domains = POWER_DOMAIN_MASK,
> > > > + .ops = &i9xx_always_on_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + },
> > > > + {
> > > > + .name = "power well 1",
> > > > + /* Handled by the DMC firmware */
> > > > + .always_on = true,
> > > > + .domains = 0,
> > > > + .ops = &hsw_power_well_ops,
> > > > + .id = SKL_DISP_PW_1,
> > > > + {
> > > > + .hsw.regs = &hsw_power_well_regs,
> > > > + .hsw.idx = ICL_PW_CTL_IDX_PW_1,
> > > > + .hsw.has_fuses = true,
> > > > + },
> > > > + },
> > > > + {
> > > > + .name = "DC off",
> > > > + .domains = RKL_DISPLAY_DC_OFF_POWER_DOMAINS,
> > > > + .ops = &gen9_dc_off_power_well_ops,
> > > > + .id = SKL_DISP_DC_OFF,
> > > > + },
> > > > + {
> > > > + .name = "power well 3",
> > > > + .domains = RKL_PW_3_POWER_DOMAINS,
> > > > + .ops = &hsw_power_well_ops,
> > > > + .id = ICL_DISP_PW_3,
> > > > + {
> > > > + .hsw.regs = &hsw_power_well_regs,
> > > > + .hsw.idx = ICL_PW_CTL_IDX_PW_3,
> > > > + .hsw.irq_pipe_mask = BIT(PIPE_B),
> > > > + .hsw.has_vga = true,
> > > > + .hsw.has_fuses = true,
> > > > + },
> > > > + },
> > > > + {
> > > > + .name = "power well 4",
> > > > + .domains = RKL_PW_4_POWER_DOMAINS,
> > > > + .ops = &hsw_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &hsw_power_well_regs,
> > > > + .hsw.idx = ICL_PW_CTL_IDX_PW_4,
> > > > + .hsw.has_fuses = true,
> > > > + .hsw.irq_pipe_mask = BIT(PIPE_C),
> > > > + }
> > > > + },
> > > IMHO the order of power well is differs from TGL/ICL,
> > > TGL/ICL PW_4 comes after DDI and AUX IO power wells.
> > > Why the order is different on RKL.
> > > Thanks,
> > > Anshuman Gupta.
> >
> > I'm not aware of any specific reason why PW_4 was placed after the
> > DDI/AUX wells on ICL, but that order seems to have been copy/pasted to
> > TGL too.
> >
> > It seems more natural to keep the main power wells together, so I wrote
> > them in what I considered to be a more intuitive order here. But
> > ultimately the order of the power wells in the array shouldn't have any
> > functional impact.
>
> The order of two power wells in the array determines their
> enabling/disabling order if they are included in the same power domain.
> If there is no dependency between two power wells their order in the
> array is not important.
>
> > Matt
> >
> > > > + {
> > > > + .name = "DDI A IO",
> > > > + .domains = ICL_DDI_IO_A_POWER_DOMAINS,
> > > > + .ops = &hsw_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_ddi_power_well_regs,
> > > > + .hsw.idx = ICL_PW_CTL_IDX_DDI_A,
> > > > + }
> > > > + },
> > > > + {
> > > > + .name = "DDI B IO",
> > > > + .domains = ICL_DDI_IO_B_POWER_DOMAINS,
> > > > + .ops = &hsw_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_ddi_power_well_regs,
> > > > + .hsw.idx = ICL_PW_CTL_IDX_DDI_B,
> > > > + }
> > > > + },
> > > > + {
> > > > + .name = "DDI D TC1 IO",
> > > > + .domains = TGL_DDI_IO_D_TC1_POWER_DOMAINS,
> > > > + .ops = &hsw_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_ddi_power_well_regs,
> > > > + .hsw.idx = TGL_PW_CTL_IDX_DDI_TC1,
> > > > + },
> > > > + },
> > > > + {
> > > > + .name = "DDI E TC2 IO",
> > > > + .domains = TGL_DDI_IO_E_TC2_POWER_DOMAINS,
> > > > + .ops = &hsw_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_ddi_power_well_regs,
> > > > + .hsw.idx = TGL_PW_CTL_IDX_DDI_TC2,
> > > > + },
> > > > + },
> > > > + {
> > > > + .name = "AUX A",
> > > > + .domains = ICL_AUX_A_IO_POWER_DOMAINS,
> > > > + .ops = &icl_aux_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_aux_power_well_regs,
> > > > + .hsw.idx = ICL_PW_CTL_IDX_AUX_A,
> > > > + },
> > > > + },
> > > > + {
> > > > + .name = "AUX B",
> > > > + .domains = ICL_AUX_B_IO_POWER_DOMAINS,
> > > > + .ops = &icl_aux_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_aux_power_well_regs,
> > > > + .hsw.idx = ICL_PW_CTL_IDX_AUX_B,
> > > > + },
> > > > + },
> > > > + {
> > > > + .name = "AUX D TC1",
> > > > + .domains = TGL_AUX_D_TC1_IO_POWER_DOMAINS,
> > > > + .ops = &icl_aux_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_aux_power_well_regs,
> > > > + .hsw.idx = TGL_PW_CTL_IDX_AUX_TC1,
> > > > + },
> > > > + },
> > > > + {
> > > > + .name = "AUX E TC2",
> > > > + .domains = TGL_AUX_E_TC2_IO_POWER_DOMAINS,
> > > > + .ops = &icl_aux_power_well_ops,
> > > > + .id = DISP_PW_ID_NONE,
> > > > + {
> > > > + .hsw.regs = &icl_aux_power_well_regs,
> > > > + .hsw.idx = TGL_PW_CTL_IDX_AUX_TC2,
> > > > + },
> > > > + },
> > > > +};
> > > > +
> > > > static int
> > > > sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
> > > > int disable_power_well)
> > > > @@ -4428,7 +4609,9 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
> > > > * The enabling order will be from lower to higher indexed wells,
> > > > * the disabling order is reversed.
> > > > */
> > > > - if (IS_GEN(dev_priv, 12)) {
> > > > + if (IS_ROCKETLAKE(dev_priv)) {
> > > > + err = set_power_wells(power_domains, rkl_power_wells);
> > > > + } else if (IS_GEN(dev_priv, 12)) {
> > > > err = set_power_wells(power_domains, tgl_power_wells);
> > > > } else if (IS_GEN(dev_priv, 11)) {
> > > > err = set_power_wells(power_domains, icl_power_wells);
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
> > > > index 95ad87d4ccb3..d145fe2bed81 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> > > > @@ -476,13 +476,13 @@ intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)
> > > > * POWER_DOMAIN_TRANSCODER_VDSC_PW2 power domain in two cases:
> > > > *
> > > > * - ICL eDP/DSI transcoder
> > > > - * - TGL pipe A
> > > > + * - Gen12+ (except RKL) pipe A
> > > > *
> > > > * For any other pipe, VDSC/joining uses the power well associated with
> > > > * the pipe in use. Hence another reference on the pipe power domain
> > > > * will suffice. (Except no VDSC/joining on ICL pipe A.)
> > > > */
> > > > - if (INTEL_GEN(i915) >= 12 && pipe == PIPE_A)
> > > > + if (INTEL_GEN(i915) >= 12 && !IS_ROCKETLAKE(i915) && pipe == PIPE_A)
> > > > return POWER_DOMAIN_TRANSCODER_VDSC_PW2;
> > > > else if (is_pipe_dsc(crtc_state))
> > > > return POWER_DOMAIN_PIPE(pipe);
> > > > --
> > > > 2.24.1
> > > >
> >
> > --
> > Matt Roper
> > Graphics Software Engineer
> > VTT-OSGC Platform Enablement
> > Intel Corporation
> > (916) 356-2795
More information about the Intel-gfx
mailing list