[Intel-gfx] [PATCH v2 14/22] drm/i915/rkl: provide port/phy mapping for vbt
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri May 8 09:44:29 UTC 2020
On Thu, May 07, 2020 at 11:05:33AM -0700, Matt Roper wrote:
> On Thu, May 07, 2020 at 03:04:30PM +0300, Ville Syrjälä wrote:
> > On Mon, May 04, 2020 at 03:52:19PM -0700, Matt Roper wrote:
> > > From: Lucas De Marchi <lucas.demarchi at intel.com>
> > >
> > > RKL uses the DDI A, DDI B, DDI USBC1, DDI USBC2 from the DE point of
> > > view, so all DDI/pipe/transcoder register use these indexes to refer to
> > > them. Combo phy and IO functions follow another namespace that we keep
> > > as "enum phy". The VBT in theory would use the DE point of view, but
> > > that does not happen in practice.
> > >
> > > Provide a table to convert the child devices to the "correct" port
> > > numbering we use. Now this is the output we get while reading the VBT:
> > >
> > > DDIA:
> > > [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
> > > [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI A]
> > > [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:275:DDI A]
> > > [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x1 for port A (VBT)
> > >
> > > DDIB:
> > > [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
> > > [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:291:DDI B]
> > > [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port B (VBT)
> > >
> > > DDI USBC1:
> > > [drm:intel_bios_port_aux_ch [i915]] using AUX D for port D (VBT)
> > > [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:295:DDI D]
> > > [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:295:DDI D]
> > > [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x3 for port D (VBT)
> > >
> > > DDI USBC2:
> > > [drm:intel_bios_port_aux_ch [i915]] using AUX E for port E (VBT)
> > > [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:306:DDI E]
> > > [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:306:DDI E]
> > > [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x9 for port E (VBT)
> > >
> > > Cc: Clinton Taylor <Clinton.A.Taylor at intel.com>
> > > Cc: Aditya Swarup <aditya.swarup at intel.com>
> > > Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> > > Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_bios.c | 72 ++++++++++++++++-------
> > > 1 file changed, 51 insertions(+), 21 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
> > > index 839124647202..4f1a72a90b8f 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_bios.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_bios.c
> > > @@ -1619,30 +1619,18 @@ static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin)
> > > return 0;
> > > }
> > >
> > > -static enum port dvo_port_to_port(u8 dvo_port)
> > > +static enum port __dvo_port_to_port(int n_ports, int n_dvo,
> > > + const int port_mapping[][3], u8 dvo_port)
> > > {
> > > - /*
> > > - * Each DDI port can have more than one value on the "DVO Port" field,
> > > - * so look for all the possible values for each port.
> > > - */
> > > - static const int dvo_ports[][3] = {
> > > - [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1},
> > > - [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1},
> > > - [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
> > > - [PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1},
> > > - [PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
> > > - [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
> > > - [PORT_G] = { DVO_PORT_HDMIG, DVO_PORT_DPG, -1},
> > > - };
> > > enum port port;
> > > int i;
> > >
> > > - for (port = PORT_A; port < ARRAY_SIZE(dvo_ports); port++) {
> > > - for (i = 0; i < ARRAY_SIZE(dvo_ports[port]); i++) {
> > > - if (dvo_ports[port][i] == -1)
> > > + for (port = PORT_A; port < n_ports; port++) {
> > > + for (i = 0; i < n_dvo; i++) {
> > > + if (port_mapping[port][i] == -1)
> > > break;
> > >
> > > - if (dvo_port == dvo_ports[port][i])
> > > + if (dvo_port == port_mapping[port][i])
> > > return port;
> > > }
> > > }
> > > @@ -1650,6 +1638,48 @@ static enum port dvo_port_to_port(u8 dvo_port)
> > > return PORT_NONE;
> > > }
> > >
> > > +static enum port dvo_port_to_port(struct drm_i915_private *dev_priv,
> > > + u8 dvo_port)
> > > +{
> > > + /*
> > > + * Each DDI port can have more than one value on the "DVO Port" field,
> > > + * so look for all the possible values for each port.
> > > + */
> > > + static const int port_mapping[][3] = {
> > > + [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 },
> > > + [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 },
> > > + [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 },
> > > + [PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 },
> > > + [PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, -1 },
> > > + [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1 },
> > > + [PORT_G] = { DVO_PORT_HDMIG, DVO_PORT_DPG, -1 },
> > > + };
> > > + /*
> > > + * Bspec lists the ports as A, B, C, D - however internally in our
> > > + * driver we keep them as PORT_A, PORT_B, PORT_D and PORT_E so the
> > > + * registers in Display Engine match the right offsets. Apply the
> > > + * mapping here to translate from VBT to internal convention.
> > > + */
> > > + static const int rkl_port_mapping[][3] = {
> > > + [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 },
> > > + [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 },
> > > + [PORT_C] = { -1 },
> > > + [PORT_D] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 },
> > > + [PORT_E] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 },
> > > + };
> > > +
> > > + if (IS_ROCKETLAKE(dev_priv))
> > > + return __dvo_port_to_port(ARRAY_SIZE(rkl_port_mapping),
> > > + ARRAY_SIZE(rkl_port_mapping[0]),
> > > + rkl_port_mapping,
> > > + dvo_port);
> > > + else
> > > + return __dvo_port_to_port(ARRAY_SIZE(port_mapping),
> > > + ARRAY_SIZE(port_mapping[0]),
> > > + port_mapping,
> > > + dvo_port);
> > > +}
> >
> > What a horror show. To me it looks like we should just use the
> > phy here. Or would that break something else?
>
> That would break EHL since its VBT uses the DDI ("D") rather than the
> PHY.
>
> So today we have two platforms (EHL and RKL) that have DDI != PHY, but
> the VBT handling of them isn't consistent. :-(
Sigh.
I wonder if we should just add encoder->vbt_port or something along
those lines. Unfortunately even that still needs some mapping tricks
due to the HDMI vs. DP dvo_port difference.
In the mantime I guess this is hidden well wnough that it won't bother
too many people until the next platform that needs these hacks comes
along.
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
>
> Matt
>
> >
> > > +
> > > static void parse_ddi_port(struct drm_i915_private *dev_priv,
> > > struct display_device_data *devdata,
> > > u8 bdb_version)
> > > @@ -1659,7 +1689,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv,
> > > bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
> > > enum port port;
> > >
> > > - port = dvo_port_to_port(child->dvo_port);
> > > + port = dvo_port_to_port(dev_priv, child->dvo_port);
> > > if (port == PORT_NONE)
> > > return;
> > >
> > > @@ -2603,10 +2633,10 @@ enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv,
> > > aux_ch = AUX_CH_B;
> > > break;
> > > case DP_AUX_C:
> > > - aux_ch = AUX_CH_C;
> > > + aux_ch = IS_ROCKETLAKE(dev_priv) ? AUX_CH_D : AUX_CH_C;
> > > break;
> > > case DP_AUX_D:
> > > - aux_ch = AUX_CH_D;
> > > + aux_ch = IS_ROCKETLAKE(dev_priv) ? AUX_CH_E : AUX_CH_D;
> > > break;
> > > case DP_AUX_E:
> > > aux_ch = AUX_CH_E;
> > > --
> > > 2.24.1
> > >
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >
> > --
> > Ville Syrjälä
> > Intel
>
> --
> Matt Roper
> Graphics Software Engineer
> VTT-OSGC Platform Enablement
> Intel Corporation
> (916) 356-2795
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list