[Intel-gfx] [PATCH i-g-t] lib: Randomise spinner location to reduce relocation risk
Chris Wilson
chris at chris-wilson.co.uk
Tue May 26 13:00:18 UTC 2020
Randomise the position of the spinner to reduce the number of
relocations we might require.
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
lib/igt_dummyload.c | 33 ++++++++++++++++++++++++++-------
1 file changed, 26 insertions(+), 7 deletions(-)
diff --git a/lib/igt_dummyload.c b/lib/igt_dummyload.c
index a733bd674..776e97baa 100644
--- a/lib/igt_dummyload.c
+++ b/lib/igt_dummyload.c
@@ -82,8 +82,21 @@ emit_recursive_batch(igt_spin_t *spin,
unsigned int nengine;
int fence_fd = -1;
uint32_t *cs, *batch;
+ uint32_t addr;
int i;
+ /*
+ * Pick a random location for our spinner et al.
+ *
+ * If available, the kernel will place our objects in our hinted
+ * locations and we will avoid having to perform any relocations.
+ *
+ * It must be a valid location (or else the kernel will be forced
+ * to select one for us) and so must be within the GTT and suitably
+ * aligned. For simplicity, stick to the low 32bit addresses.
+ */
+ addr = (random() % 1024 + 1024) << 12;
+
nengine = 0;
if (opts->engine == ALL_ENGINES) {
struct intel_execution_engine2 *engine;
@@ -114,6 +127,9 @@ emit_recursive_batch(igt_spin_t *spin,
execbuf->buffer_count++;
cs = batch;
+ obj[BATCH].offset = addr;
+ addr += BATCH_SIZE;
+
if (opts->dependency) {
igt_assert(!(opts->flags & IGT_SPIN_POLL_RUN));
@@ -152,11 +168,13 @@ emit_recursive_batch(igt_spin_t *spin,
spin->poll_handle,
0, 4096,
PROT_READ | PROT_WRITE);
+ addr += 4096; /* guard page */
+ obj[SCRATCH].offset = addr;
+ addr += 4096;
igt_assert_eq(spin->poll[SPIN_POLL_START_IDX], 0);
- /* batch is first */
- r->presumed_offset = 4096;
+ r->presumed_offset = obj[SCRATCH].offset;
r->target_handle = obj[SCRATCH].handle;
r->offset = sizeof(uint32_t) * 1;
r->delta = sizeof(uint32_t) * SPIN_POLL_START_IDX;
@@ -231,7 +249,7 @@ emit_recursive_batch(igt_spin_t *spin,
spin->condition[0] = 0xffffffff;
spin->condition[1] = 0xffffffff;
- r->presumed_offset = 0;
+ r->presumed_offset = obj[BATCH].offset;
r->target_handle = obj[BATCH].handle;
r->offset = (cs + 2 - batch) * sizeof(*cs);
r->read_domains = I915_GEM_DOMAIN_COMMAND;
@@ -239,28 +257,29 @@ emit_recursive_batch(igt_spin_t *spin,
*cs++ = MI_COND_BATCH_BUFFER_END | MI_DO_COMPARE | 2;
*cs++ = MI_BATCH_BUFFER_END;
- *cs++ = r->delta;
+ *cs++ = r->presumed_offset + r->delta;
*cs++ = 0;
}
/* recurse */
r = &relocs[obj[BATCH].relocation_count++];
r->target_handle = obj[BATCH].handle;
+ r->presumed_offset = obj[BATCH].offset;
r->offset = (cs + 1 - batch) * sizeof(*cs);
r->read_domains = I915_GEM_DOMAIN_COMMAND;
r->delta = LOOP_START_OFFSET;
if (gen >= 8) {
*cs++ = MI_BATCH_BUFFER_START | 1 << 8 | 1;
- *cs++ = r->delta;
+ *cs++ = r->presumed_offset + r->delta;
*cs++ = 0;
} else if (gen >= 6) {
*cs++ = MI_BATCH_BUFFER_START | 1 << 8;
- *cs++ = r->delta;
+ *cs++ = r->presumed_offset + r->delta;
} else {
*cs++ = MI_BATCH_BUFFER_START | 2 << 6;
if (gen < 4)
r->delta |= 1;
- *cs = r->delta;
+ *cs = r->presumed_offset + r->delta;
cs++;
}
obj[BATCH].relocs_ptr = to_user_pointer(relocs);
--
2.27.0.rc0
More information about the Intel-gfx
mailing list