[Intel-gfx] [PATCH v6 6/6] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Nov 5 16:27:17 UTC 2020
On Tue, Nov 03, 2020 at 08:00:40AM -0800, Manasi Navare wrote:
> From: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>
> Small changes to intel_dp_mode_valid(), allow listing modes that
> can only be supported in the bigjoiner configuration, which is
> not supported yet.
>
> v13:
> * Allow bigjoiner if hdisplay >5120
> v12:
> * slice_count logic simplify (Ville)
> * Fix unnecessary changes in downstream_mode_valid (Ville)
> v11:
> * Make intel_dp_can_bigjoiner non static
> so it can be used in intel_display (Manasi)
> v10:
> * Simplify logic (Ville)
> * Allow bigjoiner on edp (Ville)
> v9:
> * Restric Bigjoiner on PORT A (Ville)
> v8:
> * use source dotclock for max dotclock (Manasi)
> v7:
> * Add can_bigjoiner() helper (Ville)
> * Pass bigjoiner to plane_size validation (Ville)
> v6:
> * Rebase after dp_downstream mode valid changes (Manasi)
> v5:
> * Increase max plane width to support 8K with bigjoiner (Maarten)
> v4:
> * Rebase (Manasi)
>
> Changes since v1:
> - Disallow bigjoiner on eDP.
> Changes since v2:
> - Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
> and split off the downstream and source checking to its own function.
> (Ville)
> v3:
> * Rebase (Manasi)
>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 5 +-
> drivers/gpu/drm/i915/display/intel_display.h | 3 +-
> drivers/gpu/drm/i915/display/intel_dp.c | 78 ++++++++++++++++----
> drivers/gpu/drm/i915/display/intel_dp.h | 1 +
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi.c | 2 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 2 +-
> 7 files changed, 73 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index c59d9c2bd473..73bd9721c1a8 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -17779,7 +17779,8 @@ intel_mode_valid(struct drm_device *dev,
>
> enum drm_mode_status
> intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> - const struct drm_display_mode *mode)
> + const struct drm_display_mode *mode,
> + bool bigjoiner)
> {
> int plane_width_max, plane_height_max;
>
> @@ -17796,7 +17797,7 @@ intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> * too big for that.
> */
> if (INTEL_GEN(dev_priv) >= 11) {
> - plane_width_max = 5120;
> + plane_width_max = 5120 << bigjoiner;
> plane_height_max = 4320;
> } else {
> plane_width_max = 5120;
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index be774f216065..d24077df1711 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -513,7 +513,8 @@ u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> enum drm_mode_status
> intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> - const struct drm_display_mode *mode);
> + const struct drm_display_mode *mode,
> + bool bigjoiner);
> enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
> bool is_trans_port_sync_mode(const struct intel_crtc_state *state);
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index ca4d4a8122d9..d2023fc54a18 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -254,6 +254,17 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
> return max_link_clock * max_lanes;
> }
>
> +bool intel_dp_can_bigjoiner(struct intel_dp *intel_dp)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct intel_encoder *encoder = &intel_dig_port->base;
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +
If we want to merge this before the rest of the bigjoiner series we're
gping to need to neuter this function. Otherwise we're going to start
accepting modes tht need the bigjoiner before we actually have bigjoiner
support.
So I'd say FIXME+return false here for now if we want to merge this.
> + return INTEL_GEN(dev_priv) >= 12 ||
> + (INTEL_GEN(dev_priv) == 11 &&
> + encoder->port != PORT_A);
> +}
> +
> static int cnl_max_source_rate(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> @@ -519,7 +530,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
>
> static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> u32 link_clock, u32 lane_count,
> - u32 mode_clock, u32 mode_hdisplay)
> + u32 mode_clock, u32 mode_hdisplay,
> + bool bigjoiner)
> {
> u32 bits_per_pixel, max_bpp_small_joiner_ram;
> int i;
> @@ -537,6 +549,10 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
> max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
> mode_hdisplay;
> +
> + if (bigjoiner)
> + max_bpp_small_joiner_ram *= 2;
> +
> drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n",
> max_bpp_small_joiner_ram);
>
> @@ -546,6 +562,15 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> */
> bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
>
> + if (bigjoiner) {
> + u32 max_bpp_bigjoiner =
> + i915->max_cdclk_freq * 48 /
> + intel_dp_mode_to_fec_clock(mode_clock);
> +
> + DRM_DEBUG_KMS("Max big joiner bpp: %u\n", max_bpp_bigjoiner);
> + bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
> + }
> +
> /* Error out if the max bpp is less than smallest allowed valid bpp */
> if (bits_per_pixel < valid_dsc_bpp[0]) {
> drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n",
> @@ -568,7 +593,8 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> }
>
> static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> - int mode_clock, int mode_hdisplay)
> + int mode_clock, int mode_hdisplay,
> + bool bigjoiner)
> {
> struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> u8 min_slice_count, i;
> @@ -595,12 +621,18 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
>
> /* Find the closest match to the valid slice count values */
> for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
> - if (valid_dsc_slicecount[i] >
> - drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
> - false))
> + u8 test_slice_count = valid_dsc_slicecount[i] << bigjoiner;
> +
> + if (test_slice_count >
> + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
> break;
> - if (min_slice_count <= valid_dsc_slicecount[i])
> - return valid_dsc_slicecount[i];
> +
> + /* big joiner needs small joiner to be enabled */
> + if (bigjoiner && test_slice_count < 4)
> + continue;
> +
> + if (min_slice_count <= test_slice_count)
> + return test_slice_count;
> }
>
> drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n",
> @@ -717,6 +749,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> u16 dsc_max_output_bpp = 0;
> u8 dsc_slice_count = 0;
> enum drm_mode_status status;
> + bool dsc = false, bigjoiner = false;
>
> if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
> return MODE_NO_DBLESCAN;
> @@ -737,6 +770,14 @@ intel_dp_mode_valid(struct drm_connector *connector,
> if (mode->clock < 10000)
> return MODE_CLOCK_LOW;
>
> + if ((target_clock > max_dotclk || mode->hdisplay > 5120)
Sad that we now have to duplicate the plane width limit here. But I have
no great ideas for it at the moment. Maybe one idea would be for
intel_mode_valid_max_plane_size() to take 'bool *bigjoiner' instead
and adjust as needed. Not sure. We're definitely going to have to do
something about this for future platforms where the plane width limit
might be different.
As stated, no idea about the dsc stuff, but otherwise this is
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> + && intel_dp_can_bigjoiner(intel_dp)) {
> + bigjoiner = true;
> + max_dotclk *= 2;
> + }
> + if (target_clock > max_dotclk)
> + return MODE_CLOCK_HIGH;
> +
> max_link_clock = intel_dp_max_link_rate(intel_dp);
> max_lanes = intel_dp_max_lane_count(intel_dp);
>
> @@ -765,16 +806,23 @@ intel_dp_mode_valid(struct drm_connector *connector,
> max_link_clock,
> max_lanes,
> target_clock,
> - mode->hdisplay) >> 4;
> + mode->hdisplay,
> + bigjoiner) >> 4;
> dsc_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> target_clock,
> - mode->hdisplay);
> + mode->hdisplay,
> + bigjoiner);
> }
> +
> + dsc = dsc_max_output_bpp && dsc_slice_count;
> }
>
> - if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count)) ||
> - target_clock > max_dotclk)
> + /* big joiner configuration needs DSC */
> + if (bigjoiner && !dsc)
> + return MODE_CLOCK_HIGH;
> +
> + if (mode_rate > max_rate && !dsc)
> return MODE_CLOCK_HIGH;
>
> status = intel_dp_mode_valid_downstream(intel_connector,
> @@ -782,7 +830,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> if (status != MODE_OK)
> return status;
>
> - return intel_mode_valid_max_plane_size(dev_priv, mode);
> + return intel_mode_valid_max_plane_size(dev_priv, mode, bigjoiner);
> }
>
> u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> @@ -2351,11 +2399,13 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> pipe_config->port_clock,
> pipe_config->lane_count,
> adjusted_mode->crtc_clock,
> - adjusted_mode->crtc_hdisplay);
> + adjusted_mode->crtc_hdisplay,
> + false);
> dsc_dp_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> adjusted_mode->crtc_clock,
> - adjusted_mode->crtc_hdisplay);
> + adjusted_mode->crtc_hdisplay,
> + false);
> if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
> drm_dbg_kms(&dev_priv->drm,
> "Compressed BPP/Slice Count not supported\n");
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index 3f862b4fd34f..b871a09b6901 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -106,6 +106,7 @@ bool intel_dp_source_supports_hbr3(struct intel_dp *intel_dp);
> bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp);
> int intel_dp_link_required(int pixel_clock, int bpp);
> int intel_dp_max_data_rate(int max_link_clock, int max_lanes);
> +bool intel_dp_can_bigjoiner(struct intel_dp *intel_dp);
> bool intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state);
> void intel_dp_compute_psr_vsc_sdp(struct intel_dp *intel_dp,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index c8fcec4d0788..0c8684634fca 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -714,7 +714,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
> return 0;
> }
>
> - *status = intel_mode_valid_max_plane_size(dev_priv, mode);
> + *status = intel_mode_valid_max_plane_size(dev_priv, mode, false);
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> index afa4e6817e8c..f453ceb8d149 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> @@ -75,7 +75,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> return MODE_CLOCK_HIGH;
> }
>
> - return intel_mode_valid_max_plane_size(dev_priv, mode);
> + return intel_mode_valid_max_plane_size(dev_priv, mode, false);
> }
>
> struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index f90838bc74fb..82674a8853c6 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2274,7 +2274,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> if (status != MODE_OK)
> return status;
>
> - return intel_mode_valid_max_plane_size(dev_priv, mode);
> + return intel_mode_valid_max_plane_size(dev_priv, mode, false);
> }
>
> bool intel_hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
> --
> 2.19.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list