[Intel-gfx] [PATCH 04/13] drm/i915: Introduce skl_plane_ddb_iter
Ville Syrjala
ville.syrjala at linux.intel.com
Thu Nov 19 18:53:52 UTC 2020
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Collect a bit of the stuff used during the plane ddb
allocation into a struct we can pass around.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 94 ++++++++++++++++-----------------
1 file changed, 47 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 2b14f23759ec..d951dab840f9 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4801,6 +4801,13 @@ skl_plane_wm_level(const struct intel_crtc_state *crtc_state,
return &wm->wm[level];
}
+struct skl_plane_ddb_iter {
+ u64 data_rate;
+ u16 total[I915_MAX_PLANES];
+ u16 uv_total[I915_MAX_PLANES];
+ u16 start, size;
+};
+
static int
skl_allocate_pipe_ddb(struct intel_atomic_state *state,
struct intel_crtc *crtc)
@@ -4809,10 +4816,7 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
intel_atomic_get_new_crtc_state(state, crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct skl_ddb_entry *alloc = &crtc_state->wm.skl.ddb;
- u16 alloc_size, start = 0;
- u16 total[I915_MAX_PLANES] = {};
- u16 uv_total[I915_MAX_PLANES] = {};
- u64 total_data_rate;
+ struct skl_plane_ddb_iter iter = {};
enum plane_id plane_id;
int num_active;
u32 blocks;
@@ -4854,28 +4858,26 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
}
if (INTEL_GEN(dev_priv) >= 11)
- total_data_rate =
- icl_get_total_relative_data_rate(state, crtc);
+ iter.data_rate = icl_get_total_relative_data_rate(state, crtc);
else
- total_data_rate =
- skl_get_total_relative_data_rate(state, crtc);
+ iter.data_rate = skl_get_total_relative_data_rate(state, crtc);
ret = skl_ddb_get_pipe_allocation_limits(dev_priv, crtc_state,
alloc, &num_active);
if (ret)
return ret;
- alloc_size = skl_ddb_entry_size(alloc);
- if (alloc_size == 0)
+ iter.size = skl_ddb_entry_size(alloc);
+ if (iter.size == 0)
return 0;
/* Allocate fixed number of blocks for cursor. */
- total[PLANE_CURSOR] = skl_cursor_allocation(crtc_state, num_active);
- alloc_size -= total[PLANE_CURSOR];
+ iter.total[PLANE_CURSOR] = skl_cursor_allocation(crtc_state, num_active);
+ iter.size -= iter.total[PLANE_CURSOR];
skl_ddb_entry_init(&crtc_state->wm.skl.plane_ddb_y[PLANE_CURSOR],
- alloc->end - total[PLANE_CURSOR], alloc->end);
+ alloc->end - iter.total[PLANE_CURSOR], alloc->end);
- if (total_data_rate == 0)
+ if (iter.data_rate == 0)
return 0;
/*
@@ -4889,7 +4891,7 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
&crtc_state->wm.skl.optimal.planes[plane_id];
if (plane_id == PLANE_CURSOR) {
- if (wm->wm[level].min_ddb_alloc > total[PLANE_CURSOR]) {
+ if (wm->wm[level].min_ddb_alloc > iter.total[PLANE_CURSOR]) {
drm_WARN_ON(&dev_priv->drm,
wm->wm[level].min_ddb_alloc != U16_MAX);
blocks = U32_MAX;
@@ -4902,8 +4904,8 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
blocks += wm->uv_wm[level].min_ddb_alloc;
}
- if (blocks <= alloc_size) {
- alloc_size -= blocks;
+ if (blocks <= iter.size) {
+ iter.size -= blocks;
break;
}
}
@@ -4912,7 +4914,7 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
drm_dbg_kms(&dev_priv->drm,
"Requested display configuration exceeds system DDB limitations");
drm_dbg_kms(&dev_priv->drm, "minimum required %d/%d\n",
- blocks, alloc_size);
+ blocks, iter.size);
return -EINVAL;
}
@@ -4924,7 +4926,7 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
for_each_plane_id_on_crtc(crtc, plane_id) {
const struct skl_plane_wm *wm =
&crtc_state->wm.skl.optimal.planes[plane_id];
- u64 rate;
+ u64 data_rate;
u16 extra;
if (plane_id == PLANE_CURSOR)
@@ -4934,32 +4936,30 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
* We've accounted for all active planes; remaining planes are
* all disabled.
*/
- if (total_data_rate == 0)
+ if (iter.data_rate == 0)
break;
- rate = crtc_state->plane_data_rate[plane_id];
- extra = min_t(u16, alloc_size,
- DIV64_U64_ROUND_UP(alloc_size * rate,
- total_data_rate));
- total[plane_id] = wm->wm[level].min_ddb_alloc + extra;
- alloc_size -= extra;
- total_data_rate -= rate;
+ data_rate = crtc_state->plane_data_rate[plane_id];
+ extra = min_t(u16, iter.size,
+ DIV64_U64_ROUND_UP(iter.size * data_rate, iter.data_rate));
+ iter.total[plane_id] = wm->wm[level].min_ddb_alloc + extra;
+ iter.size -= extra;
+ iter.data_rate -= data_rate;
- if (total_data_rate == 0)
+ if (iter.data_rate == 0)
break;
- rate = crtc_state->uv_plane_data_rate[plane_id];
- extra = min_t(u16, alloc_size,
- DIV64_U64_ROUND_UP(alloc_size * rate,
- total_data_rate));
- uv_total[plane_id] = wm->uv_wm[level].min_ddb_alloc + extra;
- alloc_size -= extra;
- total_data_rate -= rate;
+ data_rate = crtc_state->uv_plane_data_rate[plane_id];
+ extra = min_t(u16, iter.size,
+ DIV64_U64_ROUND_UP(iter.size * data_rate, iter.data_rate));
+ iter.uv_total[plane_id] = wm->uv_wm[level].min_ddb_alloc + extra;
+ iter.size -= extra;
+ iter.data_rate -= data_rate;
}
- drm_WARN_ON(&dev_priv->drm, alloc_size != 0 || total_data_rate != 0);
+ drm_WARN_ON(&dev_priv->drm, iter.size != 0 || iter.data_rate != 0);
/* Set the actual DDB start/end points for each plane */
- start = alloc->start;
+ iter.start = alloc->start;
for_each_plane_id_on_crtc(crtc, plane_id) {
struct skl_ddb_entry *plane_alloc =
&crtc_state->wm.skl.plane_ddb_y[plane_id];
@@ -4971,16 +4971,16 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
/* Gen11+ uses a separate plane for UV watermarks */
drm_WARN_ON(&dev_priv->drm,
- INTEL_GEN(dev_priv) >= 11 && uv_total[plane_id]);
+ INTEL_GEN(dev_priv) >= 11 && iter.uv_total[plane_id]);
/* Leave disabled planes at (0,0) */
- if (total[plane_id])
- start = skl_ddb_entry_init(plane_alloc, start,
- start + total[plane_id]);
+ if (iter.total[plane_id])
+ iter.start = skl_ddb_entry_init(plane_alloc, iter.start,
+ iter.start + iter.total[plane_id]);
- if (uv_total[plane_id])
- start = skl_ddb_entry_init(uv_plane_alloc, start,
- start + uv_total[plane_id]);
+ if (iter.uv_total[plane_id])
+ iter.start = skl_ddb_entry_init(uv_plane_alloc, iter.start,
+ iter.start + iter.uv_total[plane_id]);
}
/*
@@ -5006,8 +5006,8 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
* planes must be enabled before the level will be used."
* So this is actually safe to do.
*/
- if (wm->wm[level].min_ddb_alloc > total[plane_id] ||
- wm->uv_wm[level].min_ddb_alloc > uv_total[plane_id])
+ if (wm->wm[level].min_ddb_alloc > iter.total[plane_id] ||
+ wm->uv_wm[level].min_ddb_alloc > iter.uv_total[plane_id])
memset(&wm->wm[level], 0, sizeof(wm->wm[level]));
/*
@@ -5031,7 +5031,7 @@ skl_allocate_pipe_ddb(struct intel_atomic_state *state,
struct skl_plane_wm *wm =
&crtc_state->wm.skl.optimal.planes[plane_id];
- if (wm->trans_wm.plane_res_b >= total[plane_id])
+ if (wm->trans_wm.plane_res_b >= iter.total[plane_id])
memset(&wm->trans_wm, 0, sizeof(wm->trans_wm));
}
--
2.26.2
More information about the Intel-gfx
mailing list