[Intel-gfx] [v11 09/13] drm/i915/display: Implement infoframes readback for LSPCON
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Nov 26 16:32:02 UTC 2020
On Thu, Nov 26, 2020 at 01:44:41PM +0530, Uma Shankar wrote:
> Implemented Infoframes enabled readback for LSPCON devices.
> This will help align the implementation with state readback
> infrastructure.
>
> v2: Added proper bitmask of enabled infoframes as per Ville's
> recommendation.
>
> v3: Added pcon specific infoframe types instead of using the HSW
> one's, as recommended by Ville.
>
> v4: Addressed Ville's review comment by adding HDMI infoframe
> versions directly instead of DIP wrappers.
>
> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_lspcon.c | 57 ++++++++++++++++++++-
> 1 file changed, 55 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index 1d3dffade168..4f3c4943e918 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -574,11 +574,64 @@ void lspcon_set_infoframes(struct intel_encoder *encoder,
> buf, ret);
> }
>
> +static bool _lspcon_read_avi_infoframe_enabled_mca(struct drm_dp_aux *aux)
> +{
> + int ret;
> + u32 val = 0;
> + u16 reg = LSPCON_MCA_AVI_IF_CTRL;
> +
> + ret = drm_dp_dpcd_read(aux, reg, &val, 1);
> + if (ret < 0) {
> + DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
> + return false;
> + }
> +
> + return val & LSPCON_MCA_AVI_IF_KICKOFF;
> +}
> +
> +static bool _lspcon_read_avi_infoframe_enabled_parade(struct drm_dp_aux *aux)
> +{
> + int ret;
> + u32 val = 0;
> + u16 reg = LSPCON_PARADE_AVI_IF_CTRL;
> +
> + ret = drm_dp_dpcd_read(aux, reg, &val, 1);
> + if (ret < 0) {
> + DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
> + return false;
> + }
> +
> + return val & LSPCON_PARADE_AVI_IF_KICKOFF;
> +}
> +
> u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config)
> {
> - /* FIXME actually read this from the hw */
> - return 0;
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> + struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + bool infoframes_enabled;
> + u32 val = 0;
> + u32 mask, tmp;
> +
> + if (lspcon->vendor == LSPCON_VENDOR_MCA)
> + infoframes_enabled = _lspcon_read_avi_infoframe_enabled_mca(&intel_dp->aux);
> + else
> + infoframes_enabled = _lspcon_read_avi_infoframe_enabled_parade(&intel_dp->aux);
> +
> + if (infoframes_enabled)
> + val |= intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_AVI);
> +
> + if (lspcon->hdr_supported) {
> + tmp = intel_de_read(dev_priv,
> + HSW_TVIDEO_DIP_CTL(pipe_config->cpu_transcoder));
> + mask = VIDEO_DIP_ENABLE_GMP_HSW;
> +
> + if (tmp & mask)
> + val |= intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA);
> + }
> +
> + return val;
> }
This seem broken until patch 10 which avoids the
remapping from DIP bits to the index. With some reordering
of the patches this seems good.
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon)
> --
> 2.26.2
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list