[Intel-gfx] [v11 07/13] i915/display: Enable BT2020 for HDR on LSPCON devices

Ville Syrjälä ville.syrjala at linux.intel.com
Thu Nov 26 17:13:09 UTC 2020


On Thu, Nov 26, 2020 at 01:44:39PM +0530, Uma Shankar wrote:
> Enable Colorspace as BT2020 if driving HDR content.Sending Colorimetry
> data for HDR using AVI infoframe. LSPCON firmware expects this and though
> SOC drives DP, for HDMI panel AVI infoframe is sent to the LSPCON device
> which transfers the same to HDMI sink.
> 
> v2: Dropped state managed in drm core as per Jani Nikula's suggestion.
> 
> v3: Aligned colorimetry handling for lspcon as per compute_avi_infoframes,
> as suggested by Ville.
> 
> v4: Added BT2020 as default for HDR. Adding the colorspace property
> interface for pcon will be take up separately. Moved changes of
> quantization in a separate patch as per Ville's comments.
> 
> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_lspcon.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index 0a4c05d67108..f6f58a991e7a 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -481,6 +481,10 @@ void lspcon_read_infoframe(struct intel_encoder *encoder,
>  	/* FIXME implement this */
>  }
>  
> +/* HDMI HDR Colorspace Spec Definitions */
> +#define NORMAL_COLORIMETRY_MASK		0x3
> +#define EXTENDED_COLORIMETRY_MASK	0x7
> +#define HDMI_COLORIMETRY_BT2020_YCC	((3 << 0) | (6 << 2) | (0 << 5))
>  void lspcon_set_infoframes(struct intel_encoder *encoder,
>  			   bool enable,
>  			   const struct intel_crtc_state *crtc_state,
> @@ -523,6 +527,20 @@ void lspcon_set_infoframes(struct intel_encoder *encoder,
>  	else
>  		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>  
> +	/*
> +	 * Set BT2020 colorspace if driving HDR data
> +	 * ToDo: Make this generic and expose all colorspaces for
> +	 * lspcon. We need to expose HDMI colorspaces when we detect
> +	 * lspcon, this has to happen after connector is registered,
> +	 * so need to fix this appropriately
> +	 */
> +	if (lspcon->active && conn_state->hdr_output_metadata) {
> +		frame.avi.colorimetry = HDMI_COLORIMETRY_BT2020_YCC &
> +					NORMAL_COLORIMETRY_MASK;
> +		frame.avi.extended_colorimetry = (HDMI_COLORIMETRY_BT2020_YCC >> 2) &
> +						  EXTENDED_COLORIMETRY_MASK;
> +	}
> +

I don't understand the point of dancing around this instead of just
fixing it.

There, I did half the work for you
https://patchwork.freedesktop.org/series/84309/


>  	/* nonsense combination */
>  	drm_WARN_ON(encoder->base.dev, crtc_state->limited_color_range &&
>  		    crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB);
> -- 
> 2.26.2

-- 
Ville Syrjälä
Intel


More information about the Intel-gfx mailing list