[Intel-gfx] [RFC PATCH 122/162] drm/i915/dg1: Compute MEM Bandwidth using MCHBAR

[Matthew Auld]

From: Clint Taylor <clinton.a.taylor at intel.com>

The PUNIT FW is currently returning 0 for all memory bandwidth
parameters. Read the values directly from MCHBAR offsets 0x5918 and
0x4000(4). This is a temporary WA until the PUNIT FW returns valid
values.

Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Matt Roper <matthew.d.roper at intel.com>
Cc: Jani Saarinen <jani.saarinen at intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
---
 drivers/gpu/drm/i915/display/intel_bw.c | 54 ++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 9e7971ce24b3..5244ae77226d 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -90,6 +90,53 @@ static int icl_pcode_read_mem_global_info(struct drm_i915_private *dev_priv,
 	return 0;
 }
 
+#define SA_PERF_STATUS_0_0_0_MCHBAR_PC _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5918)
+#define  DG1_QCLK_RATIO_MASK (0xFF << 2)
+#define  DG1_QCLK_RATIO_SHIFT 2
+#define  DG1_QCLK_REFERENCE (1 << 10)
+
+#define MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x4000)
+#define MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR_HIGH _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x4004)
+#define MCHBAR_CH1_CR_TC_PRE_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x4400)
+#define MCHBAR_CH1_CR_TC_PRE_0_0_0_MCHBAR_HIGH _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x4404)
+#define  DG1_DRAM_T_RCD_MASK (0x7F << 9)
+#define  DG1_DRAM_T_RCD_SHIFT 9
+#define  DG1_DRAM_T_RDPRE_MASK (0x3F << 11)
+#define  DG1_DRAM_T_RDPRE_SHIFT 11
+#define  DG1_DRAM_T_RAS_MASK (0xFF << 1)
+#define  DG1_DRAM_T_RAS_SHIFT 1
+#define  DG1_DRAM_T_RP_MASK (0x7F << 0)
+#define  DG1_DRAM_T_RP_SHIFT 0
+
+static int dg1_mchbar_read_qgv_point_info(struct drm_i915_private *dev_priv,
+					  struct intel_qgv_point *sp,
+					  int point)
+{
+	u32 val = 0;
+	u32 dclk_ratio = 0, dclk_reference = 0;
+
+	val = I915_READ(SA_PERF_STATUS_0_0_0_MCHBAR_PC);
+	dclk_ratio = (val & DG1_QCLK_RATIO_MASK) >> DG1_QCLK_RATIO_SHIFT;
+	if (val & DG1_QCLK_REFERENCE)
+		dclk_reference = 6; /* 6 * 16.666 MHz = 100 MHz */
+	else
+		dclk_reference = 8; /* 8 * 16.666 MHz = 133 MHz */
+	sp->dclk = dclk_ratio * dclk_reference;
+	if (sp->dclk == 0)
+		return -EINVAL;
+
+	val = I915_READ(MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR);
+	sp->t_rp = (val & DG1_DRAM_T_RP_MASK) >> DG1_DRAM_T_RP_SHIFT;
+	sp->t_rdpre = (val & DG1_DRAM_T_RDPRE_MASK) >> DG1_DRAM_T_RDPRE_SHIFT;
+
+	val = I915_READ(MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR_HIGH);
+	sp->t_rcd = (val & DG1_DRAM_T_RCD_MASK) >> DG1_DRAM_T_RCD_SHIFT;
+	sp->t_ras = (val & DG1_DRAM_T_RAS_MASK) >> DG1_DRAM_T_RAS_SHIFT;
+
+	sp->t_rc = sp->t_rp + sp->t_ras;
+	return 0;
+}
+
 static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
 					 struct intel_qgv_point *sp,
 					 int point)
@@ -153,7 +200,12 @@ static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
 		struct intel_qgv_point *sp = &qi->points[i];
 
 		ret = icl_pcode_read_qgv_point_info(dev_priv, sp, i);
-		if (ret)
+		if (IS_DG1(dev_priv) && (ret || sp->dclk == 0)) {
+			drm_dbg_kms(&dev_priv->drm, "Failed to get memory subsystem information via pcode. IFWI needs update. Trying with MCHBAR\n");
+			ret = dg1_mchbar_read_qgv_point_info(dev_priv, sp, i);
+			if (ret)
+				return ret;
+		} else if (ret)
 			return ret;
 
 		drm_dbg_kms(&dev_priv->drm,
-- 
2.26.2