[Intel-gfx] [PATCH] Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"

Jani Nikula jani.nikula at linux.intel.com
Fri Nov 27 15:25:01 UTC 2020


On Fri, 27 Nov 2020, Chris Wilson <chris at chris-wilson.co.uk> wrote:
> We now use ilk_hpd_irq_setup for all GMCH platforms that do not have
> hotplug. These are early gen3 and gen2 devices that now explode on boot
> as they try to access non-existent registers.
>
> Fixes: 794d61a19090 ("drm/i915: re-order if/else ladder for hpd_irq_setup")
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> Cc: Lucas De Marchi <lucas.demarchi at intel.com>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  drivers/gpu/drm/i915/i915_irq.c | 27 +++++++++++++++------------
>  1 file changed, 15 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index dc6febc63f1c..c80eeac53952 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -4242,18 +4242,21 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
>  	 */
>  	dev_priv->hotplug.hpd_short_storm_enabled = !HAS_DP_MST(dev_priv);
>  
> -	if (HAS_PCH_DG1(dev_priv))
> -		dev_priv->display.hpd_irq_setup = dg1_hpd_irq_setup;
> -	else if (INTEL_GEN(dev_priv) >= 11)
> -		dev_priv->display.hpd_irq_setup = gen11_hpd_irq_setup;
> -	else if (IS_GEN9_LP(dev_priv))
> -		dev_priv->display.hpd_irq_setup = bxt_hpd_irq_setup;
> -	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_SPT)
> -		dev_priv->display.hpd_irq_setup = spt_hpd_irq_setup;
> -	else if (HAS_GMCH(dev_priv) && I915_HAS_HOTPLUG(dev_priv))
> -		dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
> -	else
> -		dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup;
> +	if (HAS_GMCH(dev_priv)) {
> +		if (I915_HAS_HOTPLUG(dev_priv))
> +			dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
> +	} else {
> +		if (HAS_PCH_DG1(dev_priv))
> +			dev_priv->display.hpd_irq_setup = dg1_hpd_irq_setup;
> +		else if (INTEL_GEN(dev_priv) >= 11)
> +			dev_priv->display.hpd_irq_setup = gen11_hpd_irq_setup;
> +		else if (IS_GEN9_LP(dev_priv))
> +			dev_priv->display.hpd_irq_setup = bxt_hpd_irq_setup;
> +		else if (INTEL_PCH_TYPE(dev_priv) >= PCH_SPT)
> +			dev_priv->display.hpd_irq_setup = spt_hpd_irq_setup;
> +		else
> +			dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup;
> +	}
>  }
>  
>  /**

-- 
Jani Nikula, Intel Open Source Graphics Center


More information about the Intel-gfx mailing list