[Intel-gfx] [v6 06/11] drm/i915/display: Implement infoframes readback for LSPCON

Shankar, Uma uma.shankar at intel.com
Tue Oct 6 12:27:47 UTC 2020



> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Sent: Tuesday, October 6, 2020 2:39 PM
> To: Shankar, Uma <uma.shankar at intel.com>
> Cc: intel-gfx at lists.freedesktop.org
> Subject: Re: [v6 06/11] drm/i915/display: Implement infoframes readback for
> LSPCON
> 
> On Mon, Oct 05, 2020 at 09:36:35PM +0000, Shankar, Uma wrote:
> >
> >
> > > -----Original Message-----
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Sent: Tuesday, September 29, 2020 9:51 PM
> > > To: Shankar, Uma <uma.shankar at intel.com>
> > > Cc: intel-gfx at lists.freedesktop.org
> > > Subject: Re: [v6 06/11] drm/i915/display: Implement infoframes
> > > readback for LSPCON
> > >
> > > On Tue, Sep 15, 2020 at 02:30:42AM +0530, Uma Shankar wrote:
> > > > Implemented Infoframes enabled readback for LSPCON devices.
> > > > This will help align the implementation with state readback
> > > > infrastructure.
> > > >
> > > > v2: Added proper bitmask of enabled infoframes as per Ville's
> > > > recommendation.
> > > >
> > > > Signed-off-by: Uma Shankar <uma.shankar at intel.com>
> > > > ---
> > > >  drivers/gpu/drm/i915/display/intel_lspcon.c | 57
> > > > ++++++++++++++++++++-
> > > >  1 file changed, 55 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c
> > > > b/drivers/gpu/drm/i915/display/intel_lspcon.c
> > > > index 60863b825cc5..565913b8e656 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> > > > @@ -576,11 +576,64 @@ void lspcon_set_infoframes(struct
> > > > intel_encoder
> > > *encoder,
> > > >  				  buf, ret);
> > > >  }
> > > >
> > > > +static bool _lspcon_read_avi_infoframe_enabled_mca(struct
> > > > +drm_dp_aux
> > > > +*aux) {
> > > > +	int ret;
> > > > +	u32 val = 0;
> > > > +	u16 reg = LSPCON_MCA_AVI_IF_CTRL;
> > > > +
> > > > +	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
> > > > +	if (ret < 0) {
> > > > +		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
> > > > +		return false;
> > > > +	}
> > > > +
> > > > +	return val & LSPCON_MCA_AVI_IF_KICKOFF; }
> > > > +
> > > > +static bool _lspcon_read_avi_infoframe_enabled_parade(struct
> > > > +drm_dp_aux *aux) {
> > > > +	int ret;
> > > > +	u32 val = 0;
> > > > +	u16 reg = LSPCON_PARADE_AVI_IF_CTRL;
> > > > +
> > > > +	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
> > > > +	if (ret < 0) {
> > > > +		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
> > > > +		return false;
> > > > +	}
> > > > +
> > > > +	return val & LSPCON_PARADE_AVI_IF_KICKOFF; }
> > > > +
> > > >  u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
> > > >  			      const struct intel_crtc_state *pipe_config)  {
> > > > -	/* FIXME actually read this from the hw */
> > > > -	return 0;
> > > > +	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > > > +	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
> > > > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > > +	bool infoframes_enabled;
> > > > +	u32 val = 0;
> > > > +	u32 mask, tmp;
> > > > +
> > > > +	if (lspcon->vendor == LSPCON_VENDOR_MCA)
> > > > +		infoframes_enabled =
> > > _lspcon_read_avi_infoframe_enabled_mca(&intel_dp->aux);
> > > > +	else
> > > > +		infoframes_enabled =
> > > > +_lspcon_read_avi_infoframe_enabled_parade(&intel_dp->aux);
> > > > +
> > > > +	if (infoframes_enabled)
> > > > +		val |= VIDEO_DIP_ENABLE_AVI_HSW;
> > >
> > > Still not a fan of abusing the HSW specific reg values here.
> >
> > I just kept it so that rest of the infrastructure can be re-used
> > easily. So the AVI and GMP bit fields will get re-used and will not require any
> separate handling.
> 
> Using the abstract infoframe types wouldn't prevent that.

Ok, would remove the HSW specific bits.

> >
> > > > +
> > > > +	if (lspcon->hdr_supported) {
> > > > +		tmp = intel_de_read(dev_priv,
> > > > +				    HSW_TVIDEO_DIP_CTL(pipe_config-
> > > >cpu_transcoder));
> > > > +		mask = VIDEO_DIP_ENABLE_GMP_HSW;
> > > > +
> > > > +		if (tmp & mask)
> > > > +			val |= mask;
> > > > +	}
> > > > +
> > > > +	return val;
> > > >  }
> > > >
> > > >  void lspcon_resume(struct intel_lspcon *lspcon)
> > > > --
> > > > 2.26.2
> > >
> > > --
> > > Ville Syrjälä
> > > Intel
> 
> --
> Ville Syrjälä
> Intel


More information about the Intel-gfx mailing list