[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Futher cleanup around hpd pins and port identfiers (rev3)

[Patchwork]

== Series Details ==

Series: drm/i915: Futher cleanup around hpd pins and port identfiers (rev3)
URL   : https://patchwork.freedesktop.org/series/82411/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
ac8d5caeb9e4 drm/i915: Sort the mess around ICP TC hotplugs regs
c825eca75000 drm/i915: s/PORT_TC/TC_PORT_TC/
-:310: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'tc_port' - possible side-effects?
#310: FILE: drivers/gpu/drm/i915/i915_reg.h:10286:
+#define  ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port)	(1 << ((tc_port) < TC_PORT_TC4 ? \
 						       (tc_port) + 12 : \
+						       (tc_port) - TC_PORT_TC4 + 21))

total: 0 errors, 0 warnings, 1 checks, 269 lines checked
febabec5fc30 drm/i915: Add PORT_TCn aliases to enum port
0fd1b45546eb drm/i915: Give DDI encoders even better names
-:43: WARNING:LONG_LINE: line length of 104 exceeds 100 columns
#43: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:5183:
+				 tc_port != TC_PORT_NONE ? phy_name(phy) : tc_port - TC_PORT_TC1 + '1');

-:53: WARNING:LONG_LINE: line length of 104 exceeds 100 columns
#53: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:5193:
+				 tc_port != TC_PORT_NONE ? phy_name(phy) : tc_port - TC_PORT_TC1 + '1');

total: 0 errors, 2 warnings, 0 checks, 33 lines checked
944768cafe11 drm/i915: Introduce AUX_CH_USBCn
79ead29c1550 drm/i915: Pimp AUX CH names
b5d260d99ea5 drm/i915: Use AUX_CH_USBCn for the RKL VBT AUX CH setup
609d459a8656 drm/i915: Parametrize BXT_DE_PORT_HP_DDI with hpd_pin
504b3a46f276 drm/i915: Introduce GEN8_DE_PORT_HOTPLUG()
a0f5f533ef42 drm/i915: s/port/hpd_pin/ for icp+ ddi hpd bits
e280cadea053 drm/i915: s/tc_port/hpd_pin/ in GEN11_{TC, TBT}_HOTPLUG()
58484246fe9e drm/i915: s/tc_port/hpd_pin/ in icp+ TC hotplug bits
2cf3a3a5de78 drm/i915: Relocate intel_hpd_{enabled, hotplug}_irqs()
2f1980b7acec drm/i915: Split gen11_hpd_detection_setup() into tc vs. tbt variants
913dadb8c216 drm/i915: Don't enable hpd detection logic from irq_postinstall()
e17684d1f041 drm/i915: Rename 'tmp_mask'
ff428055fb0d drm/i915: Remove the per-plaform IIR HPD masking
-:68: ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses
#68: FILE: drivers/gpu/drm/i915/i915_reg.h:8325:
+#define SDE_TC_MASK_ICP			(SDE_TC_HOTPLUG_ICP(HPD_PORT_TC6) | \
 					 SDE_TC_HOTPLUG_ICP(HPD_PORT_TC5) | \
 					 SDE_TC_HOTPLUG_ICP(HPD_PORT_TC4) | \
 					 SDE_TC_HOTPLUG_ICP(HPD_PORT_TC3) | \

total: 1 errors, 0 warnings, 0 checks, 47 lines checked
6dc728777193 drm/i915: Enable hpd logic only for ports that are present
54780a93e89d drm/i915: Use GEN3_IRQ_INIT() to init south interrupts in icp+
d239f4c5ab84 drm/i915: Get rid of ibx_irq_pre_postinstall()