[Intel-gfx] [PATCH v5 2/3] drm/i915/display: Check PSR parameter and flag only in state compute phase
José Roberto de Souza
jose.souza at intel.com
Wed Oct 7 19:52:37 UTC 2020
Due to the debugfs flag, has_psr2 in CRTC state could have a different
value than psr.psr2_enabled and it was causing PSR2 subfeatures(DC3CO
and selective fetch) to be set to not a expected state.
So here only taking in consideration the parameter and debugfs flag
when computing PSR state, this way the CRTC state will also have
the correct state.
intel_psr_fastset_force() was already broken as
intel_psr_compute_config() was already only enabling PSR when
psr_global_enabled() and all other PSR requirements are met.
So some changes was required in this function, now it iterates over
all connectors, if it is a eDP connector and is active force a modeset
in the CRTC driving this connector, what will cause the new PSR state
to be set based on the debugfs flag.
v2:
- end connector iterator in error cases
Cc: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
drivers/gpu/drm/i915/display/intel_psr.c | 73 +++++++++++++-----------
1 file changed, 41 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 4e09ae61d4aa..02f74b0ddec1 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -91,19 +91,14 @@ static bool psr_global_enabled(struct drm_i915_private *i915)
}
}
-static bool intel_psr2_enabled(struct drm_i915_private *dev_priv,
- const struct intel_crtc_state *crtc_state)
+static bool psr2_global_enabled(struct drm_i915_private *dev_priv)
{
- /* Cannot enable DSC and PSR2 simultaneously */
- drm_WARN_ON(&dev_priv->drm, crtc_state->dsc.compression_enable &&
- crtc_state->has_psr2);
-
switch (dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
case I915_PSR_DEBUG_DISABLE:
case I915_PSR_DEBUG_FORCE_PSR1:
return false;
default:
- return crtc_state->has_psr2;
+ return true;
}
}
@@ -729,6 +724,11 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
return false;
}
+ if (!psr2_global_enabled(dev_priv)) {
+ drm_dbg_kms(&dev_priv->drm, "PSR2 disabled by flag\n");
+ return false;
+ }
+
/*
* DSC and PSR2 cannot be enabled simultaneously. If a requested
* resolution requires DSC to be enabled, priority is given to DSC
@@ -817,8 +817,11 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
if (intel_dp != dev_priv->psr.dp)
return;
- if (!psr_global_enabled(dev_priv))
+ if (!psr_global_enabled(dev_priv)) {
+ drm_dbg_kms(&dev_priv->drm, "PSR disabled by flag\n");
return;
+ }
+
/*
* HSW spec explicitly says PSR is tied to port A.
* BDW+ platforms have a instance of PSR registers per transcoder but
@@ -959,7 +962,7 @@ static void intel_psr_enable_locked(struct drm_i915_private *dev_priv,
drm_WARN_ON(&dev_priv->drm, dev_priv->psr.enabled);
- dev_priv->psr.psr2_enabled = intel_psr2_enabled(dev_priv, crtc_state);
+ dev_priv->psr.psr2_enabled = crtc_state->has_psr2;
dev_priv->psr.busy_frontbuffer_bits = 0;
dev_priv->psr.pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe;
dev_priv->psr.dc3co_enabled = !!crtc_state->dc3co_exitline;
@@ -1029,15 +1032,7 @@ void intel_psr_enable(struct intel_dp *intel_dp,
drm_WARN_ON(&dev_priv->drm, dev_priv->drrs.dp);
mutex_lock(&dev_priv->psr.lock);
-
- if (!psr_global_enabled(dev_priv)) {
- drm_dbg_kms(&dev_priv->drm, "PSR disabled by flag\n");
- goto unlock;
- }
-
intel_psr_enable_locked(dev_priv, crtc_state, conn_state);
-
-unlock:
mutex_unlock(&dev_priv->psr.lock);
}
@@ -1222,8 +1217,8 @@ void intel_psr_update(struct intel_dp *intel_dp,
mutex_lock(&dev_priv->psr.lock);
- enable = crtc_state->has_psr && psr_global_enabled(dev_priv);
- psr2_enable = intel_psr2_enabled(dev_priv, crtc_state);
+ enable = crtc_state->has_psr;
+ psr2_enable = crtc_state->has_psr2;
if (enable == psr->enabled && psr2_enable == psr->psr2_enabled) {
/* Force a PSR exit when enabling CRC to avoid CRC timeouts */
@@ -1320,11 +1315,12 @@ static bool __psr_wait_for_idle_locked(struct drm_i915_private *dev_priv)
static int intel_psr_fastset_force(struct drm_i915_private *dev_priv)
{
+ struct drm_connector_list_iter conn_iter;
struct drm_device *dev = &dev_priv->drm;
struct drm_modeset_acquire_ctx ctx;
struct drm_atomic_state *state;
- struct intel_crtc *crtc;
- int err;
+ struct drm_connector *conn;
+ int err = 0;
state = drm_atomic_state_alloc(dev);
if (!state)
@@ -1334,25 +1330,38 @@ static int intel_psr_fastset_force(struct drm_i915_private *dev_priv)
state->acquire_ctx = &ctx;
retry:
- for_each_intel_crtc(dev, crtc) {
- struct intel_crtc_state *crtc_state =
- intel_atomic_get_crtc_state(state, crtc);
- if (IS_ERR(crtc_state)) {
- err = PTR_ERR(crtc_state);
- goto error;
+ drm_connector_list_iter_begin(dev, &conn_iter);
+ drm_for_each_connector_iter(conn, &conn_iter) {
+ struct drm_connector_state *conn_state;
+ struct drm_crtc_state *crtc_state;
+
+ if (conn->connector_type != DRM_MODE_CONNECTOR_eDP)
+ continue;
+
+ conn_state = drm_atomic_get_connector_state(state, conn);
+ if (IS_ERR(conn_state)) {
+ err = PTR_ERR(conn_state);
+ break;
}
- if (crtc_state->hw.active && crtc_state->has_psr) {
- /* Mark mode as changed to trigger a pipe->update() */
- crtc_state->uapi.mode_changed = true;
+ if (!conn_state->crtc)
+ continue;
+
+ crtc_state = drm_atomic_get_crtc_state(state, conn_state->crtc);
+ if (IS_ERR(crtc_state)) {
+ err = PTR_ERR(crtc_state);
break;
}
+
+ /* Mark mode as changed to trigger a pipe->update() */
+ crtc_state->mode_changed = true;
}
+ drm_connector_list_iter_end(&conn_iter);
- err = drm_atomic_commit(state);
+ if (err == 0)
+ err = drm_atomic_commit(state);
-error:
if (err == -EDEADLK) {
drm_atomic_state_clear(state);
err = drm_modeset_backoff(&ctx);
--
2.28.0
More information about the Intel-gfx
mailing list