[Intel-gfx] [PATCH 4/6] drm/i915/display: Split and export main surface calculation from skl_check_main_surface()

[José Roberto de Souza]

The calculation the offsets of the main surface will be needed by PSR2
selective fetch code so here splitting and exporting it.
No functional changes were done here.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 95 ++++++++++++--------
 drivers/gpu/drm/i915/display/intel_display.h |  2 +
 2 files changed, 59 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index cf1417ff54d7..64242ecb8610 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3889,6 +3889,56 @@ intel_plane_fence_y_offset(const struct intel_plane_state *plane_state)
 	return y;
 }
 
+int skl_calc_main_surface_offset(const struct intel_plane_state *plane_state,
+				 int *x, int *y, u32 *offset)
+{
+	struct drm_i915_private *dev_priv = to_i915(plane_state->uapi.plane->dev);
+	const struct drm_framebuffer *fb = plane_state->hw.fb;
+	const int aux_plane = intel_main_to_aux_plane(fb, 0);
+	const u32 aux_offset = plane_state->color_plane[aux_plane].offset;
+	const u32 alignment = intel_surf_alignment(fb, 0);
+	const int w = drm_rect_width(&plane_state->uapi.src) >> 16;
+
+	intel_add_fb_offsets(x, y, plane_state, 0);
+	*offset = intel_plane_compute_aligned_offset(x, y, plane_state, 0);
+	if (drm_WARN_ON(&dev_priv->drm, alignment && !is_power_of_2(alignment)))
+		return -EINVAL;
+
+	/*
+	 * AUX surface offset is specified as the distance from the
+	 * main surface offset, and it must be non-negative. Make
+	 * sure that is what we will get.
+	 */
+	if (aux_plane && *offset > aux_offset)
+		*offset = intel_plane_adjust_aligned_offset(x, y, plane_state, 0,
+							    *offset,
+							    aux_offset & ~(alignment - 1));
+
+	/*
+	 * When using an X-tiled surface, the plane blows up
+	 * if the x offset + width exceed the stride.
+	 *
+	 * TODO: linear and Y-tiled seem fine, Yf untested,
+	 */
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED) {
+		int cpp = fb->format->cpp[0];
+
+		while ((*x + w) * cpp > plane_state->color_plane[0].stride) {
+			if (*offset == 0) {
+				drm_dbg_kms(&dev_priv->drm,
+					    "Unable to find suitable display surface offset due to X-tiling\n");
+				return -EINVAL;
+			}
+
+			*offset = intel_plane_adjust_aligned_offset(x, y, plane_state, 0,
+								    *offset,
+								    *offset - alignment);
+		}
+	}
+
+	return 0;
+}
+
 static int skl_check_main_surface(struct intel_plane_state *plane_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(plane_state->uapi.plane->dev);
@@ -3899,9 +3949,10 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	int w = drm_rect_width(&plane_state->uapi.src) >> 16;
 	int h = drm_rect_height(&plane_state->uapi.src) >> 16;
 	int max_width, min_width, max_height;
-	u32 alignment, offset;
-	int aux_plane = intel_main_to_aux_plane(fb, 0);
-	u32 aux_offset = plane_state->color_plane[aux_plane].offset;
+	const int aux_plane = intel_main_to_aux_plane(fb, 0);
+	const u32 alignment = intel_surf_alignment(fb, 0);
+	u32 offset;
+	int ret;
 
 	if (INTEL_GEN(dev_priv) >= 11) {
 		max_width = icl_max_plane_width(fb, 0, rotation);
@@ -3926,41 +3977,9 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 		return -EINVAL;
 	}
 
-	intel_add_fb_offsets(&x, &y, plane_state, 0);
-	offset = intel_plane_compute_aligned_offset(&x, &y, plane_state, 0);
-	alignment = intel_surf_alignment(fb, 0);
-	if (drm_WARN_ON(&dev_priv->drm, alignment && !is_power_of_2(alignment)))
-		return -EINVAL;
-
-	/*
-	 * AUX surface offset is specified as the distance from the
-	 * main surface offset, and it must be non-negative. Make
-	 * sure that is what we will get.
-	 */
-	if (aux_plane && offset > aux_offset)
-		offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
-							   offset, aux_offset & ~(alignment - 1));
-
-	/*
-	 * When using an X-tiled surface, the plane blows up
-	 * if the x offset + width exceed the stride.
-	 *
-	 * TODO: linear and Y-tiled seem fine, Yf untested,
-	 */
-	if (fb->modifier == I915_FORMAT_MOD_X_TILED) {
-		int cpp = fb->format->cpp[0];
-
-		while ((x + w) * cpp > plane_state->color_plane[0].stride) {
-			if (offset == 0) {
-				drm_dbg_kms(&dev_priv->drm,
-					    "Unable to find suitable display surface offset due to X-tiling\n");
-				return -EINVAL;
-			}
-
-			offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
-								   offset, offset - alignment);
-		}
-	}
+	ret = skl_calc_main_surface_offset(plane_state, &x, &y, &offset);
+	if (ret)
+		return ret;
 
 	/*
 	 * CCS AUX surface doesn't have its own x/y offsets, we must make sure
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index d10b7c8cde3f..4be68b5be149 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -609,6 +609,8 @@ u32 skl_plane_ctl_crtc(const struct intel_crtc_state *crtc_state);
 u32 skl_plane_stride(const struct intel_plane_state *plane_state,
 		     int plane);
 int skl_check_plane_surface(struct intel_plane_state *plane_state);
+int skl_calc_main_surface_offset(const struct intel_plane_state *plane_state,
+				 int *x, int *y, u32 *offset);
 int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
 int skl_format_to_fourcc(int format, bool rgb_order, bool alpha);
 unsigned int i9xx_plane_max_stride(struct intel_plane *plane,
-- 
2.28.0