[Intel-gfx] [RFC 05/13] drm/i915: Add support for starting FRL training for HDMI2.1 via PCON

Shankar, Uma uma.shankar at intel.com
Sun Oct 18 22:14:36 UTC 2020



> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nautiyal at intel.com>
> Sent: Thursday, October 15, 2020 4:23 PM
> To: intel-gfx at lists.freedesktop.org
> Cc: dri-devel at lists.freedesktop.org; Shankar, Uma <uma.shankar at intel.com>;
> Kulkarni, Vandita <vandita.kulkarni at intel.com>; ville.syrjala at linux.intel.com;
> Sharma, Swati2 <swati2.sharma at intel.com>
> Subject: [RFC 05/13] drm/i915: Add support for starting FRL training for HDMI2.1
> via PCON
> 
> This patch adds functions to start FRL training for an HDMI2.1 sink, connected via
> a PCON as a DP branch device.
> This patch also adds a new structure for storing frl training related data, when
> FRL training is completed.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
>  .../drm/i915/display/intel_display_types.h    |   7 +
>  drivers/gpu/drm/i915/display/intel_dp.c       | 200 ++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_dp.h       |   2 +
>  3 files changed, 209 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index e2f58d0575a2..6c69922313d6 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1287,6 +1287,11 @@ struct intel_dp_compliance {
>  	u8 test_lane_count;
>  };
> 
> +struct intel_dp_pcon_frl {
> +	bool is_trained;
> +	int trained_rate_gbps;
> +};
> +
>  struct intel_dp {
>  	i915_reg_t output_reg;
>  	u32 DP;
> @@ -1408,6 +1413,8 @@ struct intel_dp {
> 
>  	bool hobl_failed;
>  	bool hobl_active;
> +
> +	struct intel_dp_pcon_frl frl;
>  };
> 
>  enum lspcon_vendor {
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index cd6934f28f32..c1342b5e7781 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2885,6 +2885,9 @@ static void intel_dp_prepare(struct intel_encoder
> *encoder,
>  			intel_dp->DP |= DP_PIPE_SEL_CHV(crtc->pipe);
>  		else
>  			intel_dp->DP |= DP_PIPE_SEL(crtc->pipe);
> +
> +		intel_dp->frl.is_trained = false;
> +		intel_dp->frl.trained_rate_gbps = 0;
>  	}
>  }
> 
> @@ -3781,6 +3784,9 @@ static void intel_disable_dp(struct intel_atomic_state
> *state,
>  	intel_edp_backlight_off(old_conn_state);
>  	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
>  	intel_edp_panel_off(intel_dp);
> +
> +	intel_dp->frl.is_trained = false;
> +	intel_dp->frl.trained_rate_gbps = 0;
>  }
> 
>  static void g4x_disable_dp(struct intel_atomic_state *state, @@ -3876,6
> +3882,200 @@ cpt_set_link_train(struct intel_dp *intel_dp,
>  	intel_de_posting_read(dev_priv, intel_dp->output_reg);  }
> 
> +static int intel_dp_get_max_rate_gbps(struct intel_dp *intel_dp) {
> +	int max_link_clock, max_lanes, max_rate_khz, max_rate_gbps;
> +
> +	max_link_clock = intel_dp_max_link_rate(intel_dp);
> +	max_lanes = intel_dp_max_lane_count(intel_dp);
> +	max_rate_khz = intel_dp_max_data_rate(max_link_clock, max_lanes);
> +	max_rate_gbps = 8 * DIV_ROUND_UP(max_rate_khz, 1000000);
> +
> +	return max_rate_gbps;
> +}
> +
> +static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) {
> +	int bw_gbps[] = {9, 18, 24, 32, 40, 48};
> +	int i;
> +
> +	for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) {
> +		if (frl_bw_mask & (1 << i))
> +			return bw_gbps[i];
> +	}
> +	return 0;
> +}
> +
> +static int intel_dp_pcon_set_frl_mask(int max_frl) {
> +	int max_frl_mask = 0;
> +
> +	switch (max_frl) {
> +	case 48:
> +		max_frl_mask |= DP_PCON_FRL_BW_MASK_48GBPS;

Just say it as return DP_PCON_FRL_BW_MASK_48GBPS. 
Do it universally.

> +		break;
> +	case 40:
> +		max_frl_mask |= DP_PCON_FRL_BW_MASK_40GBPS;
> +		break;
> +	case 32:
> +		max_frl_mask |= DP_PCON_FRL_BW_MASK_32GBPS;
> +		break;
> +	case 24:
> +		max_frl_mask |= DP_PCON_FRL_BW_MASK_24GBPS;
> +		break;
> +	case 18:
> +		max_frl_mask |= DP_PCON_FRL_BW_MASK_18GBPS;
> +		break;
> +	case 9:
> +		max_frl_mask |= DP_PCON_FRL_BW_MASK_9GBPS;
> +		break;
> +	default:
> +		max_frl_mask = 0;
> +	}
> +
> +	return max_frl_mask;
> +}
> +
> +static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) {
> +	struct intel_connector *intel_connector = intel_dp->attached_connector;
> +	struct drm_connector *connector = &intel_connector->base;
> +
> +	return (connector->display_info.hdmi.max_frl_rate_per_lane *
> +		connector->display_info.hdmi.max_lanes);
> +}
> +
> +static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
> +{ #define PCON_EXTENDED_TRAIN_MODE true#define
> PCON_CONCURRENT_MODE
> +true #define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE #define
> +PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE #define

Don't use true instead 1 < 0 as true is not the right thing to be used here.

> +TIMEOUT_FRL_READY_MS 500 #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000
> +
> +	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> +	int max_frl, max_pcon_frl, max_sink_frl, max_rate_gbps, max_frl_edid,
> ret;
> +	u8 max_frl_mask = 0, frl_trained_mask;
> +	bool is_active;
> +
> +	ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux);
> +	if (ret < 0)
> +		return ret;
> +
> +	max_rate_gbps = intel_dp_get_max_rate_gbps(intel_dp);
> +	drm_dbg(&i915->drm, "Source max rate = %d Gbps\n", max_rate_gbps);
> +
> +	max_pcon_frl = intel_dp->dfp.pcon_max_frl;

Append it with rate or bw.

> +	drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl);
> +
> +	/* Double Check from HDMI SINK EDID */
> +	max_frl_edid = intel_dp_hdmi_sink_max_frl(intel_dp);
> +	drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n",
> +max_frl_edid);
> +
> +	max_sink_frl = intel_dp->dfp.sink_max_frl;
> +	drm_dbg(&i915->drm, "Sink max rate from PCON = %d Gbps\n",
> +max_sink_frl);
> +
> +	/* TODO MAX SINK FRL from PCON is not enumerated. Using MAX FRL
> value

Use multi line comment style.

> +	 * directly from EDID. Need to confirm from Spec.
> +	 */
> +	max_frl = min(max_rate_gbps, min(max_frl_edid, max_pcon_frl));
> +
> +	if (max_frl <= 0)
> +		return -EINVAL;
> +
> +	ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false);
> +	if (ret < 0)
> +		return ret;
> +	/* Wait for PCON to be FRL Ready */
> +	wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true,
> +TIMEOUT_FRL_READY_MS);
> +
> +	if (!is_active)
> +		return -ETIMEDOUT;
> +
> +	max_frl_mask = intel_dp_pcon_set_frl_mask(max_frl);
> +	ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl,
> PCON_SEQUENTIAL_MODE);
> +	if (ret < 0)
> +		return ret;
> +	ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_mask,
> PCON_NORMAL_TRAIN_MODE);
> +	if (ret < 0)
> +		return ret;
> +	ret = drm_dp_pcon_frl_enable(&intel_dp->aux);
> +	if (ret < 0)
> +		return ret;
> +	/*
> +	 * Wait for FRL to be completed
> +	 * Check if the HDMI Link is up and active.
> +	 */
> +	wait_for(is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux) ==
> +true, TIMEOUT_HDMI_LINK_ACTIVE_MS);
> +
> +	if (!is_active)
> +		return -ETIMEDOUT;
> +	/*
> +	 * Verify HDMI Link configuration shows FRL Mode.
> +	 */
> +	if (DP_PCON_HDMI_MODE_FRL !=
> drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) {
> +		drm_dbg(&i915->drm, "HDMI couldn't be trained in FRL
> Mode\n");
> +		return -EINVAL;
> +	}
> +	drm_dbg(&i915->drm, "MAX_FRL_MASK = %u, FRL_TRAINED_MASK =
> %u\n",
> +max_frl_mask, frl_trained_mask);
> +
> +	/*
> +	 * Read HDMI_LINK_STATUS_TRAINED 0x2005 bit 5
> +	 * TODO: Details not mentioned in spec. Need to check.
> +	 */
> +
> +	intel_dp->frl.trained_rate_gbps =
> intel_dp_pcon_get_frl_mask(frl_trained_mask);
> +	intel_dp->frl.is_trained = true;
> +	drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n",
> +intel_dp->frl.trained_rate_gbps);
> +
> +	return 0;
> +}
> +
> +static bool intel_dp_is_frl_required(struct intel_dp *intel_dp) {
> +	if (!intel_dp->frl.is_trained)
> +		return true;
> +	/*
> +	 * #TODO check if the mode really required FRL or can work
> +	 * with TMDS mode.
> +	 */
> +
> +	return false;
> +}
> +
> +static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) {
> +	if (drm_dp_is_branch(intel_dp->dpcd) &&
> +	    intel_dp_hdmi_sink_max_frl(intel_dp) > 0)
> +		return true;
> +
> +	return false;
> +}
> +
> +void intel_dp_check_frl_training(struct intel_dp *intel_dp) {
> +	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> +
> +	if (!intel_dp_is_hdmi_2_1_sink(intel_dp) ||
> +	    !intel_dp_is_frl_required(intel_dp))
> +		return;
> +
> +	if (intel_dp_pcon_start_frl_training(intel_dp) < 0) {
> +		int ret, mode;
> +
> +		drm_dbg(&dev_priv->drm, "Couldnt set FRL mode, continuing
> with TMDS mode\n");
> +		ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux);
> +		mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL);
> +
> +		if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS)
> +			drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set
> TMDS mode\n");
> +	}
> +
> +	else

Move it up and enclose in { to match the above if style.

> +		drm_dbg(&dev_priv->drm, "FRL training Completed\n"); }
> +
>  static void
>  g4x_set_link_train(struct intel_dp *intel_dp,
>  		   const struct intel_crtc_state *crtc_state, diff --git
> a/drivers/gpu/drm/i915/display/intel_dp.h
> b/drivers/gpu/drm/i915/display/intel_dp.h
> index fcc28eb242f2..81d83d88cd41 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -143,4 +143,6 @@ bool intel_dp_initial_fastset_check(struct intel_encoder
> *encoder,  void intel_dp_sync_state(struct intel_encoder *encoder,
>  			 const struct intel_crtc_state *crtc_state);
> 
> +void intel_dp_check_frl_training(struct intel_dp *intel_dp);
> +
>  #endif /* __INTEL_DP_H__ */
> --
> 2.17.1



More information about the Intel-gfx mailing list