[Intel-gfx] [RFC 10/13] drm/dp_helper: Add support for Configuring DSC for HDMI2.1 Pcon
Shankar, Uma
uma.shankar at intel.com
Sun Oct 18 23:19:55 UTC 2020
> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nautiyal at intel.com>
> Sent: Thursday, October 15, 2020 4:23 PM
> To: intel-gfx at lists.freedesktop.org
> Cc: dri-devel at lists.freedesktop.org; Shankar, Uma <uma.shankar at intel.com>;
> Kulkarni, Vandita <vandita.kulkarni at intel.com>; ville.syrjala at linux.intel.com;
> Sharma, Swati2 <swati2.sharma at intel.com>
> Subject: [RFC 10/13] drm/dp_helper: Add support for Configuring DSC for
> HDMI2.1 Pcon
>
> This patch adds registers for getting DSC encoder capability for a HDMI2.1 PCon.
> It also addes helper functions to configure DSC between the PCON and HDMI2.1
> sink.
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 93 +++++++++++++++++++++++++++
> include/drm/drm_dp_helper.h | 109 ++++++++++++++++++++++++++++++++
> 2 files changed, 202 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c
> b/drivers/gpu/drm/drm_dp_helper.c index 33a4ac2fb225..f10a9c2d6f04 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -2929,3 +2929,96 @@ void drm_dp_pcon_hdmi_frl_link_error_count(struct
> drm_dp_aux *aux,
> }
> }
> EXPORT_SYMBOL(drm_dp_pcon_hdmi_frl_link_error_count);
> +
> +static
> +int drm_dp_pcon_configure_dsc_enc(struct drm_dp_aux *aux, u8
> +pps_buf_config) {
> + u8 buf = 0;
> + int ret;
> +
> + buf |= DP_PCON_ENABLE_DSC_ENCODER;
Directly assign it.
> + if (pps_buf_config <= DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER) {
> + buf &= ~DP_PCON_ENCODER_PPS_OVERRIDE_MASK;
> + buf |= pps_buf_config << 2;
> + }
> +
> + ret = drm_dp_dpcd_writeb(aux,
> DP_PROTOCOL_CONVERTER_CONTROL_2, buf);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +/**
> + * drm_dp_pcon_pps_default() - Let PCON fill the default pps parameters
> + * for DSC1.2 between PCON & HDMI2.1 sink
> + * @aux: DisplayPort AUX channel
> + *
> + * Returns 0 on success, else returns negative error code.
> + * */
> +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux) {
> + int ret;
> +
> + ret = drm_dp_pcon_configure_dsc_enc(aux,
> DP_PCON_ENC_PPS_OVERRIDE_DISABLED);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_pps_default);
> +
> +/**
> + * drm_dp_pcon_pps_override_buf() - Configure PPS encoder override
> +buffer for
> + * HDMI sink
> + * @aux: DisplayPort AUX channel
> + * @pps_buf: 128 bytes to be written into PPS buffer for HDMI sink by PCON.
> + *
> + * Returns 0 on success, else returns negative error code.
> + * */
> +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8
> +pps_buf[128]) {
> + int ret;
> +
> + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVERRIDE_BASE,
> &pps_buf, 128);
> + if (ret < 0)
> + return ret;
> +
> + ret = drm_dp_pcon_configure_dsc_enc(aux,
> DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_pps_override_buf);
> +
> +/*
> + * drm_dp_pcon_pps_override_param() - Write PPS parameters to DSC
> +encoder
> + * override registers
> + * @aux: DisplayPort AUX channel
> + * @pps_param: 3 Parameters (2 Bytes each) : Slice Width, Slice Height,
> + * bits_per_pixel.
> + *
> + * Returns 0 on success, else returns negative error code.
> + * */
> +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8
> +pps_param[6]) {
> + int ret;
> +
> + ret = drm_dp_dpcd_write(aux,
> DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT, &pps_param[0], 2);
> + if (ret < 0)
> + return ret;
> + ret = drm_dp_dpcd_write(aux,
> DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH, &pps_param[1], 2);
> + if (ret < 0)
> + return ret;
> + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_BPP,
> &pps_param[2], 2);
> + if (ret < 0)
> + return ret;
> +
> + ret = drm_dp_pcon_configure_dsc_enc(aux,
> DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_pps_override_param);
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index
> eb26c86dc8ca..3de022d4a65e 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -441,6 +441,83 @@ struct drm_device;
> # define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2)
> # define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3)
>
> +/* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */
> +#define DP_PCON_DSC_ENCODER 0x092
> +# define DP_PCON_DSC_ENCODER_SUPPORTED (1 << 0)
> +# define DP_PCON_DSC_PPS_ENC_OVERRIDE (1 << 1)
> +
> +/* DP-HDMI2.1 PCON DSC Version */
> +#define DP_PCON_DSC_VERSION 0x093
> +# define DP_PCON_DSC_MAJOR_MASK (0xF << 0)
> +# define DP_PCON_DSC_MINOR_MASK (0xF << 4)
> +# define DP_PCON_DSC_MAJOR_SHIFT 0
> +# define DP_PCON_DSC_MINOR_SHIFT 4
> +
> +/* DP-HDMI2.1 PCON DSC RC Buffer block size */
> +#define DP_PCON_DSC_RC_BUF_BLK_INFO 0x094
> +# define DP_PCON_DSC_RC_BUF_BLK_SIZE (0x3 << 0)
> +# define DP_PCON_DSC_RC_BUF_BLK_1KB 0
> +# define DP_PCON_DSC_RC_BUF_BLK_4KB 1
> +# define DP_PCON_DSC_RC_BUF_BLK_16KB 2
> +# define DP_PCON_DSC_RC_BUF_BLK_64KB 3
> +
> +/* DP-HDMI2.1 PCON DSC RC Buffer size */
> +#define DP_PCON_DSC_RC_BUF_SIZE 0x095
> +
> +/* DP-HDMI2.1 PCON DSC Slice capabilities-1 */
> +#define DP_PCON_DSC_SLICE_CAP_1 0x096
> +# define DP_PCON_DSC_1_PER_DSC_ENC (0x1 << 0)
> +# define DP_PCON_DSC_2_PER_DSC_ENC (0x1 << 1)
> +# define DP_PCON_DSC_4_PER_DSC_ENC (0x1 << 3)
> +# define DP_PCON_DSC_6_PER_DSC_ENC (0x1 << 4)
> +# define DP_PCON_DSC_8_PER_DSC_ENC (0x1 << 5)
> +# define DP_PCON_DSC_10_PER_DSC_ENC (0x1 << 6)
> +# define DP_PCON_DSC_12_PER_DSC_ENC (0x1 << 7)
> +
> +#define DP_PCON_DSC_BUF_BIT_DEPTH 0x097
> +# define DP_PCON_DSC_BIT_DEPTH_MASK (0xF << 0)
> +# define DP_PCON_DSC_DEPTH_9_BITS 0
> +# define DP_PCON_DSC_DEPTH_10_BITS 1
> +# define DP_PCON_DSC_DEPTH_11_BITS 2
> +# define DP_PCON_DSC_DEPTH_12_BITS 3
> +# define DP_PCON_DSC_DEPTH_13_BITS 4
> +# define DP_PCON_DSC_DEPTH_14_BITS 5
> +# define DP_PCON_DSC_DEPTH_15_BITS 6
> +# define DP_PCON_DSC_DEPTH_16_BITS 7
> +# define DP_PCON_DSC_DEPTH_8_BITS 8
> +
> +#define DP_PCON_DSC_BLOCK_PREDICTION 0x098
> +# define DP_PCON_DSC_BLOCK_PRED_SUPPORT (0x1 << 0)
> +
> +#define DP_PCON_DSC_ENC_COLOR_FMT_CAP 0x099
> +# define DP_PCON_DSC_ENC_RGB (0x1 << 0)
> +# define DP_PCON_DSC_ENC_YUV444 (0x1 << 1)
> +# define DP_PCON_DSC_ENC_YUV422_S (0x1 << 2)
> +# define DP_PCON_DSC_ENC_YUV422_N (0x1 << 3)
> +# define DP_PCON_DSC_ENC_YUV420_N (0x1 << 4)
> +
> +#define DP_PCON_DSC_ENC_COLOR_DEPTH_CAP 0x09A
> +# define DP_PCON_DSC_ENC_8BPC (0x1 << 0)
> +# define DP_PCON_DSC_ENC_10BPC (0x1 << 0)
> +# define DP_PCON_DSC_ENC_12BPC (0x1 << 0)
These offsets are wrong, should be 0x1 < (1, 2 and 3)
> +
> +#define DP_PCON_DSC_MAX_SLICE_WIDTH 0x09B
> +
> +/* DP-HDMI2.1 PCON DSC Slice capabilities-2 */
> +#define DP_PCON_DSC_SLICE_CAP_2 0x09C
> +# define DP_PCON_DSC_16_PER_DSC_ENC (0x1 << 0)
> +# define DP_PCON_DSC_20_PER_DSC_ENC (0x1 << 1)
> +# define DP_PCON_DSC_24_PER_DSC_ENC (0x1 << 2)
> +
> +/* DP-HDMI2.1 PCON HDMI TX Encoder Bits/pixel increment */
> +#define DP_PCON_DSC_BPP_INCR 0x09E
> +# define DP_PCON_DSC_BPP_INCR_MASK (0x7 << 0)
> +# define DP_PCON_DSC_ONE_16TH_BPP 0
> +# define DP_PCON_DSC_ONE_8TH_BPP 1
> +# define DP_PCON_DSC_ONE_4TH_BPP 2
> +# define DP_PCON_DSC_ONE_HALF_BPP 3
> +# define DP_PCON_DSC_ONE_BPP 4
> +
> /* DP Extended DSC Capabilities */
> #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 0x0a0 /* DP 1.4a SCR */
> #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1 @@ -1134,6
> +1211,12 @@ struct drm_device;
> # define DP_HDMI_FORCE_SCRAMBLING (1 << 3) /* DP 1.4 */
> #define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3
> */
> # define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */
> +# define DP_PCON_ENABLE_DSC_ENCODER (1 << 1)
> +# define DP_PCON_ENCODER_PPS_OVERRIDE_MASK (0x3 << 2)
> +# define DP_PCON_ENC_PPS_OVERRIDE_DISABLED 0
> +# define DP_PCON_ENC_PPS_OVERRIDE_EN_PARAMS 1
> +# define DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER 2
> +
>
> /* PCON Downstream HDMI ERROR Status per Lane */
> #define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037
> @@ -1145,6 +1228,29 @@ struct drm_device;
> # define DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS (1 << 1)
> # define DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS (1 << 2)
>
> +/* PCON HDMI CONFIG PPS Override Buffer
> + * Valid Offsets to be added to Base : 0-127 */
> +#define DP_PCON_HDMI_PPS_OVERRIDE_BASE 0x3100
> +
> +/* PCON HDMI CONFIG PPS Override Parameter: Slice height
> + * Offset-0 8LSBs of the Slice height.
> + * Offset-1 8MSBs of the Slice height.
> + */
> +#define DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT 0x3180
> +
> +/* PCON HDMI CONFIG PPS Override Parameter: Slice width
> + * Offset-0 8LSBs of the Slice width.
> + * Offset-1 8MSBs of the Slice width.
> + */
> +#define DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH 0x3182
> +
> +/* PCON HDMI CONFIG PPS Override Parameter: bits_per_pixel
> + * Offset-0 8LSBs of the bits_per_pixel.
> + * Offset-1 2MSBs of the bits_per_pixel.
> + */
> +#define DP_PCON_HDMI_PPS_OVRD_BPP 0x3184
> +
> /* HDCP 1.3 and HDCP 2.2 */
> #define DP_AUX_HDCP_BKSV 0x68000
> #define DP_AUX_HDCP_RI_PRIME 0x68005
> @@ -2063,4 +2169,7 @@ int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);
> bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); int
> drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask);
> void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, struct
> drm_connector *connector);
> +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux); int
> +drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]);
> +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8
> +pps_param[6]);
> #endif /* _DRM_DP_HELPER_H_ */
> --
> 2.17.1
More information about the Intel-gfx
mailing list