[Intel-gfx] [PATCH 1/5] drm/i915: Restore ILK-M RPS support

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Restore RPS for ILK-M. We lost it when an extra HAS_RPS()
check appeared in intel_rps_enable().

Unfortunaltey this just makes the performance worse on my
ILK because intel_ips insists on limiting the GPU freq to
the minimum. If we don't do the RPS init then intel_ips will
not limit the frequency for whatever reason. Either it can't
get at some required information and thus makes wrong decisions,
or we mess up some weights/etc. and cause it to make the wrong
decisions when RPS init has been done, or the entire thing is
just wrong. Would require a bunch of reverse engineering to
figure out what's going on.

Cc: stable at vger.kernel.org
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Fixes: 9c878557b1eb ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 27964ac0638a..1fe390727d80 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -389,6 +389,7 @@ static const struct intel_device_info ilk_m_info = {
 	GEN5_FEATURES,
 	PLATFORM(INTEL_IRONLAKE),
 	.is_mobile = 1,
+	.has_rps = true,
 	.display.has_fbc = 1,
 };
 
-- 
2.26.2