[Intel-gfx] [PATCH v6 1/7] drm/i915: Add enable/disable flip done and flip done handler
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Sep 1 11:12:03 UTC 2020
On Fri, Aug 07, 2020 at 03:05:45PM +0530, Karthik B S wrote:
> Add enable/disable flip done functions and the flip done handler
> function which handles the flip done interrupt.
>
> Enable the flip done interrupt in IER.
>
> Enable flip done function is called before writing the
> surface address register as the write to this register triggers
> the flip done interrupt
>
> Flip done handler is used to send the page flip event as soon as the
> surface address is written as per the requirement of async flips.
> The interrupt is disabled after the event is sent.
>
> v2: -Change function name from icl_* to skl_* (Paulo)
> -Move flip handler to this patch (Paulo)
> -Remove vblank_put() (Paulo)
> -Enable flip done interrupt for gen9+ only (Paulo)
> -Enable flip done interrupt in power_well_post_enable hook (Paulo)
> -Removed the event check in flip done handler to handle async
> flips without pageflip events.
>
> v3: -Move skl_disable_flip_done out of interrupt handler (Paulo)
> -Make the pending vblank event NULL in the beginning of
> flip_done_handler to remove sporadic WARN_ON that is seen.
>
> v4: -Calculate timestamps using flip done time stamp and current
> timestamp for async flips (Ville)
>
> v5: -Fix the sparse warning by making the function 'g4x_get_flip_counter'
> static.(Reported-by: kernel test robot <lkp at intel.com>)
> -Fix the typo in commit message.
>
> v6: -Revert back to old time stamping code.
> -Remove the break while calling skl_enable_flip_done. (Paulo)
>
> Signed-off-by: Karthik B S <karthik.b.s at intel.com>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 8 +++
> drivers/gpu/drm/i915/i915_irq.c | 52 ++++++++++++++++++++
> drivers/gpu/drm/i915/i915_irq.h | 2 +
> 3 files changed, 62 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 522c772a2111..1ac2e6f27597 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15562,6 +15562,11 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
>
> intel_dbuf_pre_plane_update(state);
>
> + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> + if (new_crtc_state->uapi.async_flip)
> + skl_enable_flip_done(&crtc->base);
> + }
> +
> /* Now enable the clocks, plane, pipe, and connectors that we set up. */
> dev_priv->display.commit_modeset_enables(state);
>
> @@ -15583,6 +15588,9 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
> drm_atomic_helper_wait_for_flip_done(dev, &state->base);
>
> for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> + if (new_crtc_state->uapi.async_flip)
> + skl_disable_flip_done(&crtc->base);
Where do we wait for the flip done? Can't see such code anywhere.
> +
> if (new_crtc_state->hw.active &&
> !needs_modeset(new_crtc_state) &&
> !new_crtc_state->preload_luts &&
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index f113fe44572b..6cc129b031d3 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1296,6 +1296,23 @@ display_pipe_crc_irq_handler(struct drm_i915_private *dev_priv,
> u32 crc4) {}
> #endif
>
> +static void flip_done_handler(struct drm_i915_private *dev_priv,
> + unsigned int pipe)
> +{
> + struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> + struct drm_crtc_state *crtc_state = crtc->base.state;
> + struct drm_pending_vblank_event *e = crtc_state->event;
> + struct drm_device *dev = &dev_priv->drm;
> + unsigned long irqflags;
> +
> + spin_lock_irqsave(&dev->event_lock, irqflags);
> +
> + crtc_state->event = NULL;
> +
> + drm_crtc_send_vblank_event(&crtc->base, e);
> +
> + spin_unlock_irqrestore(&dev->event_lock, irqflags);
> +}
>
> static void hsw_pipe_crc_irq_handler(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> @@ -2390,6 +2407,9 @@ gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl)
> if (iir & GEN8_PIPE_VBLANK)
> intel_handle_vblank(dev_priv, pipe);
>
> + if (iir & GEN9_PIPE_PLANE1_FLIP_DONE)
> + flip_done_handler(dev_priv, pipe);
> +
> if (iir & GEN8_PIPE_CDCLK_CRC_DONE)
> hsw_pipe_crc_irq_handler(dev_priv, pipe);
>
> @@ -2711,6 +2731,19 @@ int bdw_enable_vblank(struct drm_crtc *crtc)
> return 0;
> }
>
> +void skl_enable_flip_done(struct drm_crtc *crtc)
> +{
> + struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> + enum pipe pipe = to_intel_crtc(crtc)->pipe;
> + unsigned long irqflags;
> +
> + spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> +
> + bdw_enable_pipe_irq(dev_priv, pipe, GEN9_PIPE_PLANE1_FLIP_DONE);
> +
> + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> +}
> +
> /* Called from drm generic code, passed 'crtc' which
> * we use as a pipe index
> */
> @@ -2771,6 +2804,19 @@ void bdw_disable_vblank(struct drm_crtc *crtc)
> spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> }
>
> +void skl_disable_flip_done(struct drm_crtc *crtc)
> +{
> + struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> + enum pipe pipe = to_intel_crtc(crtc)->pipe;
> + unsigned long irqflags;
> +
> + spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> +
> + bdw_disable_pipe_irq(dev_priv, pipe, GEN9_PIPE_PLANE1_FLIP_DONE);
> +
> + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> +}
> +
> static void ibx_irq_reset(struct drm_i915_private *dev_priv)
> {
> struct intel_uncore *uncore = &dev_priv->uncore;
> @@ -2981,6 +3027,9 @@ void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
> u32 extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN;
> enum pipe pipe;
>
> + if (INTEL_GEN(dev_priv) >= 9)
> + extra_ier |= GEN9_PIPE_PLANE1_FLIP_DONE;
> +
> spin_lock_irq(&dev_priv->irq_lock);
>
> if (!intel_irqs_enabled(dev_priv)) {
> @@ -3459,6 +3508,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
> de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
> GEN8_PIPE_FIFO_UNDERRUN;
>
> + if (INTEL_GEN(dev_priv) >= 9)
> + de_pipe_enables |= GEN9_PIPE_PLANE1_FLIP_DONE;
> +
> de_port_enables = de_port_masked;
> if (IS_GEN9_LP(dev_priv))
> de_port_enables |= BXT_DE_PORT_HOTPLUG_MASK;
> diff --git a/drivers/gpu/drm/i915/i915_irq.h b/drivers/gpu/drm/i915/i915_irq.h
> index 25f25cd95818..2f10c8135116 100644
> --- a/drivers/gpu/drm/i915/i915_irq.h
> +++ b/drivers/gpu/drm/i915/i915_irq.h
> @@ -112,11 +112,13 @@ int i915gm_enable_vblank(struct drm_crtc *crtc);
> int i965_enable_vblank(struct drm_crtc *crtc);
> int ilk_enable_vblank(struct drm_crtc *crtc);
> int bdw_enable_vblank(struct drm_crtc *crtc);
> +void skl_enable_flip_done(struct drm_crtc *crtc);
> void i8xx_disable_vblank(struct drm_crtc *crtc);
> void i915gm_disable_vblank(struct drm_crtc *crtc);
> void i965_disable_vblank(struct drm_crtc *crtc);
> void ilk_disable_vblank(struct drm_crtc *crtc);
> void bdw_disable_vblank(struct drm_crtc *crtc);
> +void skl_disable_flip_done(struct drm_crtc *crtc);
>
> void gen2_irq_reset(struct intel_uncore *uncore);
> void gen3_irq_reset(struct intel_uncore *uncore, i915_reg_t imr,
> --
> 2.22.0
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list