[Intel-gfx] [PATCH 4/4] drm/i915/hdcp: Enable Gen12 HDCP 1.4 DP MST support

[Anshuman Gupta]

Enable HDCP 1.4 over DP MST for Gen12.
This also enable the stream encryption support for
older generations.

Cc: Ramalingam C <ramalingam.c at intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 10 ++----
 drivers/gpu/drm/i915/display/intel_hdcp.c   | 36 +++++++++++++--------
 2 files changed, 26 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index c6107182519f..932190526919 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -809,13 +809,9 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
 	intel_attach_force_audio_property(connector);
 	intel_attach_broadcast_rgb_property(connector);
 
-
-	/* TODO: Figure out how to make HDCP work on GEN12+ */
-	if (INTEL_GEN(dev_priv) < 12) {
-		ret = intel_dp_init_hdcp(dig_port, intel_connector);
-		if (ret)
-			DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
-	}
+	ret = intel_dp_init_hdcp(dig_port, intel_connector);
+	if (ret)
+		drm_dbg_kms(&dev_priv->drm, "HDCP init failed, skipping.\n");
 
 	/*
 	 * Reuse the prop from the SST connector because we're
diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
index f401fdaa7336..64dbd3cb0571 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
@@ -612,7 +612,12 @@ int intel_hdcp_auth_downstream(struct intel_connector *connector)
 	return ret;
 }
 
-/* Implements Part 1 of the HDCP authorization procedure */
+/*
+ * Implements Part 1 of the HDCP authorization procedure.
+ * Authentication Part 1 steps for Multi-stream DisplayPort.
+ * Step 1. Auth Part 1 sequence on the driving MST Trasport Link.
+ * Step 2. Enable encryption for each stream that requires encryption.
+ */
 static int intel_hdcp_auth(struct intel_connector *connector)
 {
 	struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
@@ -766,10 +771,14 @@ static int intel_hdcp_auth(struct intel_connector *connector)
 		return -ETIMEDOUT;
 	}
 
-	/*
-	 * XXX: If we have MST-connected devices, we need to enable encryption
-	 * on those as well.
-	 */
+	/* DP MST Auth Part 1 Step 2.a and Step 2.b */
+	if (shim->stream_encryption) {
+		ret = shim->stream_encryption(dig_port, true);
+		if (ret) {
+			drm_err(&dev_priv->drm, "Failed to enable HDCP 1.4 stream enc\n");
+			return ret;
+		}
+	}
 
 	if (repeater_present)
 		return intel_hdcp_auth_downstream(connector);
@@ -793,15 +802,16 @@ static int _intel_hdcp_disable(struct intel_connector *connector)
 
 	/*
 	 * If there are other connectors on this port using HDCP, don't disable
-	 * it. Instead, toggle the HDCP signalling off on that particular
-	 * connector/pipe and exit.
+	 * it. Instead, deselect HDCP Multiplestream Bit on that particular
+	 * connector/pipe (Step 1), poll for stream encryption status to be
+	 * to be disable (Step 2) and exit.
 	 */
-	if (dig_port->num_hdcp_streams > 0) {
-		ret = hdcp->shim->toggle_signalling(dig_port,
-						    cpu_transcoder, false);
-		if (ret)
-			DRM_ERROR("Failed to disable HDCP signalling\n");
-		return ret;
+	if (dig_port->num_hdcp_streams > 0 && hdcp->shim->stream_encryption) {
+		ret = hdcp->shim->stream_encryption(dig_port, false);
+		if (ret) {
+			drm_err(&dev_priv->drm, "Failed to disable HDCP 1.4 stream enc\n");
+			return ret;
+		}
 	}
 
 	hdcp->hdcp_encrypted = false;
-- 
2.26.2