[Intel-gfx] [PATCH] drm/xlnx: Use devm_drm_dev_alloc
Hyun Kwon
hyun.kwon at xilinx.com
Tue Sep 8 19:16:00 UTC 2020
Hi Daniel,
On Mon, Sep 07, 2020 at 01:22:25AM -0700, Daniel Vetter wrote:
> Gets rid of drmm_add_final_kfree, which I want to unexport so that it
> stops confusion people about this transitional state of rolling drm
> managed memory out.
>
> This also fixes the missing drm_dev_put in the error path of the probe
> code.
>
> v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all
> other paths leaked on error, this should have been in
> zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of
> devm_drm_dev_alloc.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> Cc: Hyun Kwon <hyun.kwon at xilinx.com>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Cc: Michal Simek <michal.simek at xilinx.com>
> Cc: linux-arm-kernel at lists.infradead.org
Looks correct to me.
Reviewed-by: Hyun Kwon <hyun.kwon at xilinx.com>
Thanks!
-hyun
> ---
> drivers/gpu/drm/xlnx/zynqmp_dpsub.c | 27 ++++++---------------------
> 1 file changed, 6 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> index 26328c76305b..8e69303aad3f 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> @@ -111,7 +111,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
> /* Initialize mode config, vblank and the KMS poll helper. */
> ret = drmm_mode_config_init(drm);
> if (ret < 0)
> - goto err_dev_put;
> + return ret;
>
> drm->mode_config.funcs = &zynqmp_dpsub_mode_config_funcs;
> drm->mode_config.min_width = 0;
> @@ -121,7 +121,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
>
> ret = drm_vblank_init(drm, 1);
> if (ret)
> - goto err_dev_put;
> + return ret;
>
> drm->irq_enabled = 1;
>
> @@ -154,8 +154,6 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
>
> err_poll_fini:
> drm_kms_helper_poll_fini(drm);
> -err_dev_put:
> - drm_dev_put(drm);
> return ret;
> }
>
> @@ -208,27 +206,16 @@ static int zynqmp_dpsub_probe(struct platform_device *pdev)
> int ret;
>
> /* Allocate private data. */
> - dpsub = kzalloc(sizeof(*dpsub), GFP_KERNEL);
> - if (!dpsub)
> - return -ENOMEM;
> + dpsub = devm_drm_dev_alloc(&pdev->dev, &zynqmp_dpsub_drm_driver,
> + struct zynqmp_dpsub, drm);
> + if (IS_ERR(dpsub))
> + return PTR_ERR(dpsub);
>
> dpsub->dev = &pdev->dev;
> platform_set_drvdata(pdev, dpsub);
>
> dma_set_mask(dpsub->dev, DMA_BIT_MASK(ZYNQMP_DISP_MAX_DMA_BIT));
>
> - /*
> - * Initialize the DRM device early, as the DRM core mandates usage of
> - * the managed memory helpers tied to the DRM device.
> - */
> - ret = drm_dev_init(&dpsub->drm, &zynqmp_dpsub_drm_driver, &pdev->dev);
> - if (ret < 0) {
> - kfree(dpsub);
> - return ret;
> - }
> -
> - drmm_add_final_kfree(&dpsub->drm, dpsub);
> -
> /* Try the reserved memory. Proceed if there's none. */
> of_reserved_mem_device_init(&pdev->dev);
>
> @@ -286,8 +273,6 @@ static int zynqmp_dpsub_remove(struct platform_device *pdev)
> clk_disable_unprepare(dpsub->apb_clk);
> of_reserved_mem_device_release(&pdev->dev);
>
> - drm_dev_put(drm);
> -
> return 0;
> }
>
> --
> 2.28.0
>
More information about the Intel-gfx
mailing list