[Intel-gfx] [PATCH v3 0/6] Convert the intel iommu driver to the dma-iommu api

[Tvrtko Ursulin]

Hi,

On 12/09/2020 04:21, Lu Baolu wrote:
> Tom Murphy has almost done all the work. His latest patch series was
> posted here.
> 
> https://lore.kernel.org/linux-iommu/20200903201839.7327-1-murphyt7@tcd.ie/
> 
> Thanks a lot!
> 
> This series is a follow-up with below changes:
> 
> 1. Add a quirk for the i915 driver issue described in Tom's cover
> letter.

Last week I have copied you on an i915 series which appears to remove the need for this quirk. so if we get those i915 patches reviewed and merged, do you still want to pursue this quirk?

> 2. Fix several bugs in patch "iommu: Allow the dma-iommu api to use
> bounce buffers" to make the bounce buffer work for untrusted devices.
> 3. Several cleanups in iommu/vt-d driver after the conversion.

With the previous version of the series I hit a problem on Ivybridge where apparently the dma engine width is not respected. At least that is my layman interpretation of the errors. From the older thread:

<3> [209.526605] DMAR: intel_iommu_map: iommu width (39) is not sufficient for the mapped address (ffff008000)

Relevant iommu boot related messages are:

<6>[    0.184234] DMAR: Host address width 36
<6>[    0.184245] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
<6>[    0.184288] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
<6>[    0.184308] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
<6>[    0.184337] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
<6>[    0.184357] DMAR: RMRR base: 0x000000d8d28000 end: 0x000000d8d46fff
<6>[    0.184377] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff
<6>[    0.184398] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
<6>[    0.184414] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
<6>[    0.184428] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[    0.185173] DMAR-IR: Enabled IRQ remapping in x2apic mode

<6>[    0.878934] DMAR: No ATSR found
<6>[    0.878966] DMAR: dmar0: Using Queued invalidation
<6>[    0.879007] DMAR: dmar1: Using Queued invalidation

<6>[    0.915032] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[    0.915060] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[    0.915084] software IO TLB: mapped [mem 0xc80d4000-0xcc0d4000] (64MB)

(Full boot log at https://intel-gfx-ci.01.org/tree/drm-tip/Trybot_7054/fi-ivb-3770/boot0.txt, failures at https://intel-gfx-ci.01.org/tree/drm-tip/Trybot_7054/fi-ivb-3770/igt@i915_selftest@live@blt.html.)

Does this look familiar or at least plausible to you? Is this something your new series has fixed?

Regards,

Tvrtko

> 
> Please review and test.
> 
> Best regards,
> baolu
> 
> Lu Baolu (2):
>    iommu: Add quirk for Intel graphic devices in map_sg
>    iommu/vt-d: Cleanup after converting to dma-iommu ops
> 
> Tom Murphy (4):
>    iommu: Handle freelists when using deferred flushing in iommu drivers
>    iommu: Add iommu_dma_free_cpu_cached_iovas()
>    iommu: Allow the dma-iommu api to use bounce buffers
>    iommu/vt-d: Convert intel iommu driver to the iommu ops
> 
>   .../admin-guide/kernel-parameters.txt         |   5 -
>   drivers/iommu/dma-iommu.c                     | 229 ++++-
>   drivers/iommu/intel/Kconfig                   |   1 +
>   drivers/iommu/intel/iommu.c                   | 885 +++---------------
>   include/linux/dma-iommu.h                     |   8 +
>   include/linux/iommu.h                         |   1 +
>   6 files changed, 323 insertions(+), 806 deletions(-)
>