[Intel-gfx] [V12 4/4] drm/i915/dsi: Initiate fame request in cmd mode

[Ville Syrjälä]

On Wed, Sep 16, 2020 at 09:45:28PM +0530, Vandita Kulkarni wrote:
> In TE Gate mode or TE NO_GATE mode on every flip
> we need to set the frame update request bit.
> After this  bit is set transcoder hardware will
> automatically send the frame data to the panel
> in case of TE NO_GATE mode, where it sends after
> it receives the TE event in case of TE_GATE mode.
> Once the frame data is sent to the panel, we see
> the frame counter updating.
> 
> v2: Use intel_de_read/write
> 
> v3: remove the usage of private_flags
> 
> v4: Use icl_dsi in func names if non static,
>     fix code formatting issues. (Jani)
> 
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c       | 26 ++++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++
>  drivers/gpu/drm/i915/display/intel_dsi.h     |  1 +
>  3 files changed, 37 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 2789020e20db..7d2abc7f6ba3 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -205,6 +205,32 @@ static int dsi_send_pkt_payld(struct intel_dsi_host *host,
>  	return 0;
>  }
>  
> +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +	u32 tmp, flags;
> +	enum port port;
> +
> +	flags = crtc->mode_flags;
> +
> +	/*
> +	 * case 1 also covers dual link
> +	 * In case of dual link, frame update should be set on
> +	 * DSI_0
> +	 */
> +	if (flags & I915_MODE_FLAG_DSI_USE_TE0)
> +		port = PORT_A;
> +	else if (flags & I915_MODE_FLAG_DSI_USE_TE1)
> +		port = PORT_B;
> +	else
> +		return;
> +
> +	tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
> +	tmp |= DSI_FRAME_UPDATE_REQUEST;
> +	intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp);
> +}
> +
>  static void dsi_program_swing_and_deemphasis(struct intel_encoder *encoder)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index f862403388f6..11a20bf2255f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15621,6 +15621,16 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
>  		intel_set_cdclk_post_plane_update(state);
>  	}
>  
> +	/*
> +	 * Incase of mipi dsi command mode, we need to set frame update
> +	 * for every commit
> +	 */
> +	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> +		if (INTEL_GEN(dev_priv) >= 11 &&
> +		    intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
> +			if (new_crtc_state->hw.active)
> +				icl_dsi_frame_update(new_crtc_state);

If this is the thing that triggers the update then it should
probably be called at the start of intel_pipe_update_end().

> +
>  	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
>  	 * already, but still need the state for the delayed optimization. To
>  	 * fix this:
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
> index 19f78a4022d3..625f2f1ae061 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> @@ -167,6 +167,7 @@ static inline u16 intel_dsi_encoder_ports(struct intel_encoder *encoder)
>  
>  /* icl_dsi.c */
>  void icl_dsi_init(struct drm_i915_private *dev_priv);
> +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state);
>  
>  /* intel_dsi.c */
>  int intel_dsi_bitrate(const struct intel_dsi *intel_dsi);
> -- 
> 2.21.0.5.gaeb582a

-- 
Ville Syrjälä
Intel